Compare Equipment Go Back

6060 Hydraulic Mining Shovel

General

Engine Output - SAE J1995 3015 HP - -
Bucket Payload 67 ton (US) - -
Operating Weight 660 ton (US) - -
Note Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. - -

Engine

Engine Model 2 x Cat 3512E - -

Diesel Engines

Rated Speed 1,800 min-1 (1,800 rpm) - -
Number of Cylinders - Each Engine 12 - -
Bore 6.69 in - -
Stroke 8.46 in - -
Displacement 3574 in³ - -
Aspiration Turbocharged and charge air-cooled - -
Components (1) Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) - -
Components (2) High-capacity water separator - -
Components (3) Two-stage fuel filter with series filtration - -
Components (4) Heavy-duty air filters - -
Components (5) Microprocessed engine management - -
Components (6) Hydraulically driven radiator fan with electronically controlled fan speed - -
Components (7) Exhaust manifold and turbo heat shields - -

Diesel Engine - Lesser Regulated

Gross Power - SAE J1995 3025 HP - -
Net Power - ISO 9249 2990 HP - -
Net Power - SAE J1349 2821 HP - -
Emissions Optimized for fuel consumption. - -

Diesel Engine - Highly Regulated

Gross Power - SAE J1995 3015 HP - -
Net Power - SAE J1349 2810 HP - -
Net Power - ISO 9249 2979 HP - -
Emissions Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. - -

Electrical System

System Voltage 24 V - -
Batteries in Series/Parallel Installation 6 x 210 Ah; 12 V each; 630 Ah 24 V in total - -
Components (1) 6 maintenance-free batteries - -
Components (2) Lockable battery isolator switch - -
Components (3) Lockable starter isolator switch - -
Components (4) 13 LED high-brightness working flood lights - -
Components (5) 17 LED service lights - -
Components (6) 2 electric horns (1 cab module; 1 oil cooler module) - -

Operating Weights

6060 FS - Standard Track Pads 4.58 ft - -
6060 FS - Operating Weight 1320110 lb - -
6060 FS - Ground Pressure 26.6 N/cm2 (38.5 psi) - -
Backhoe - Standard Track Pads 4.58 ft - -
Backhoe - Operating Weight 1323860 lb - -
Backhoe - Ground Pressure 26.7 N/cm2 (38.7 psi) - -
Note Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. - -

Service Refill Capacities

Fuel Tank 3136 gal (US) - -
Hydraulic Tank 1876 gal (US) - -
Hydraulic System - Including Tank 2483 gal (US) - -
Engine Oil 86.6 gal (US) - -
Cooling System 211.4 gal (US) - -
Swing Drive 42.4 gal (US) - -
Grease Tank 188 gal (US) - -

Hydraulic System with Pump Managing System

Main Pumps - Diesel Version 8 variable swash plate pumps - -
Main Pumps - Maximum Oil Flow - Diesel Version 8 x 650 L/min (8 x 172 gal/min) - -
Maximum Pressure - Attachment 4640 psi - -
Maximum Pressure - Travel 5220 psi - -
Swing Pumps - Diesel Version 4 reversible swash plate pumps - -
Swing Pumps - Maximum Oil Flow - Diesel Version 4 x 352 L/min (4 x 93 gal/min) - -
Maximum Pressure - Swing Pumps 5075 psi - -

Hydraulic Oil Cooling

Oil Flow of Cooling Pumps 4 x 488 L/min (4 x 129 gal/min) - -
Components 4 cooling fans - -
Diameter - Fan 46 in - -
Features (1) Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running - -
Features (2) Fan speed and flow of oil to the coolers are thermostatically controlled - -
Features (3) Extremely high cooling efficiency to ensure optimum oil temperature - -
Features (4) Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers - -

Swing System

Swing Drive 4 compact planetary transmissions with axial piston motors - -
Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released - -
Maximum Swing Speed 3.8 r/min - -
Swing Ring Triple-race roller bearing with sealed internal gearing - -
Features (1) Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody - -
Features (2) Closed-loop swing circuit with torque control - -
Features (3) Hydraulic braking of the swing motion by counteracting control - -
Features (4) All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system - -

Undercarriage

Travel Speed - 1st Stage - Maximum 0.68 mile/h - -
Travel Speed - 2nd Stage - Maximum 0.99 mile/h - -
Maximum Tractive Force 661160 lb - -
Gradeability - Travel Drives - Maximum 39 % - -
Track Pads - Each Side 42 - -
Bottom Rollers - Each Side 7 - -
Support Rollers - Each Side 2 plus a skid plate in between - -
Travel Drives - Each Side 1 planetary transmission with 2 two-stage axial piston motors - -
Components (1) HD tracks with cast double-grouser track pad - -
Components (2) HD fixed axle rollers and idlers - -
Components (3) Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas - -
Components (4) Acoustic travel alarm (forward and reverse) - -
Components (5) Fully hydraulic, self-adjusting track tensioning system with piston accumulator - -
Components (6) Automatic hydraulic retarder valve to prevent over-speed on downhill travel - -

Operator's Cab

Operator's Eye Level - Approximately 24.91 ft - -
Internal Dimensions of Cab - Length 7.33 ft - -
Internal Dimensions of Cab - Width 5.33 ft - -
Internal Dimensions of Cab - Height 6.75 ft - -
Components (1) Single hydraulically driven HVAC System, with dual system option - -
Components (2) In-floor window with removable grate - -
Components (3) Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support - -
Components (4) Independently adjustable seat consoles with integrated joysticks - -
Components (5) Operator Protective Guard (Top Guard) (ISO 10262:1998) - -
Components (6) Elevated full-size trainer seat with safety belt and laptop desk - -
Components (7) Additional fold-away auxiliary seat with safety belt - -
Components (8) Operator Presence switch - -
Components (9) Monitoring system with 254 mm (10 in) touch screen - -
Components (10) Powered 45 degree access stairway - -
Components (11) Emergency egress ladder - -
Components (12) FM/AM radio with USB and AUX input - -
Components (13) Roller blinds on 3 front windows - -
Components (14) 3 cup holders - -
Components (15) Cat Electronic Technician service port - -

Automatic Lubrication System

Capacity - Grease Container 188 gal (US) - -
Type (1) Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times - -
Type (2) System failures displayed by monitoring system - -
Type (3) Grease filters (200 µm) between service station and container as well as directly behind grease pump - -
Type (4) Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring - -

Attachments

Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces - -
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance - -
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) Constant boom momentum throughout the entire lift arc; Crowd force assistance - -
All buckets (FS and BH) are equipped with a wear package consisting of: (1) Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth - -
All buckets (FS and BH) are equipped with a wear package consisting of: (2) Wing shrouds on side walls and heel shrouds at bottom edges - -
Type (1) Catwalks with rails at booms (FS and BH) - -
Type (2) Guards for shovel cylinders (FS) - -
Type (3) Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve - -
Type (4) Service access holes from both sides of boom (FS and BH) and stick (FS) - -
Type (5) Welding procedures allow for internal counter-welding (double prep weld) wherever possible - -
Type (6) Booms and sticks are stress-relieved after welding - -
Type (7) Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas - -
Type (8) Special wear packages for highly abrasive materials available upon request - -

Digging Forces

Maximum Crowd Force 494410 lb - -
Maximum Breakout Force 388780 lb - -

Working Ranges

Maximum Digging Height 51.17 ft - -
Maximum Digging Reach 54.17 ft - -
Maximum Digging Depth 9.17 ft - -

Standard Bucket Capacity

Face Shovel (heaped 2:1) 44.5 yd³ - -
Backhoe (heaped 1:1) 44.5 yd³ - -

Backhoe Attachment (BH) - Digging Forces

Stick Digging Force - ISO 295740 lb - -
Bucket Digging Force - ISO 274840 lb - -

Backhoe Attachment (BH) - Working Range

Maximum Digging Height 52.83 ft - -
Maximum Digging Reach 62.33 ft - -
Maximum Digging Depth 29.17 ft - -

Retractable Service Station

Installation Retractable service station installed underneath the engine module and easily accessible from ground. - -
Equipped With (1) Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container - -
Equipped With (2) Cat jump-start socket - -
Equipped With (3) Indicator lights - -
Add a Similar Product:
  • 6030 Hydraulic Shovel Add
  • 6040 Hydraulic Mining Shovel Add
  • 6020B Hydraulic Shovel Add
  • 6015 Hydraulic Shovel Add