CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    6060 Hydraulic Mining Shovel
    View Product
    6015 Hydraulic Shovel
    View Product Remove

    General
    Engine Output - SAE J1995 3015 HP 824 HP -
    Bucket Payload 67 ton (US) 16.1 ton (US) -
    Operating Weight 660 ton (US) 154.3 ton (US) -
    Note Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available. -

    Engine
    Engine Model 2 x Cat 3512E - -
    Emissions - U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1 -

    Diesel Engines
    Rated Speed 1,800 min-1 (1,800 rpm) - -
    Number of Cylinders - Each Engine 12 - -
    Bore 6.69 in - -
    Stroke 8.46 in - -
    Displacement 3574 in³ - -
    Aspiration Turbocharged and charge air-cooled - -
    Components (1) Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) - -
    Components (2) High-capacity water separator - -
    Components (3) Two-stage fuel filter with series filtration - -
    Components (4) Heavy-duty air filters - -
    Components (5) Microprocessed engine management - -
    Components (6) Hydraulically driven radiator fan with electronically controlled fan speed - -
    Components (7) Exhaust manifold and turbo heat shields - -

    Diesel Engine - Lesser Regulated
    Gross Power - SAE J1995 3025 HP - -
    Net Power - ISO 9249 2990 HP - -
    Net Power - SAE J1349 2821 HP - -
    Emissions Optimized for fuel consumption. - -

    Diesel Engine - Highly Regulated
    Gross Power - SAE J1995 3015 HP - -
    Net Power - SAE J1349 2810 HP - -
    Net Power - ISO 9249 2979 HP - -
    Emissions Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. - -

    Electrical System
    System Voltage 24 V 24 V -
    Batteries in Series/Parallel Installation 6 x 210 Ah; 12 V each; 630 Ah 24 V in total - -
    Components (1) 6 maintenance-free batteries Emergency stop in cabin, engine module, pump room and on service station accessible from ground level -
    Components (2) Lockable battery isolator switch Four maintenance free batteries -
    Components (3) Lockable starter isolator switch Lockable battery isolation switch -
    Components (4) 13 LED high-brightness working flood lights 5 LED service lights -
    Components (5) 17 LED service lights 14 LED high-brightness working lights -
    Components (6) 2 electric horns (1 cab module; 1 oil cooler module) 2 electric horns -
    Batteries - 4 × 200 Ah (12 V each) -
    Alternator Rating - 150 A (24 V) in total -
    Components (7) - Two (2) lights for rear end -
    Components (9) - One (1) beacon light on cabin roof -
    Components (8) - One (1) light for machine deck/service -

    Operating Weights
    6060 FS - Standard Track Pads 4.58 ft - -
    6060 FS - Operating Weight 1320110 lb - -
    6060 FS - Ground Pressure 26.6 N/cm2 (38.5 psi) - -
    Backhoe - Standard Track Pads 4.58 ft - -
    Backhoe - Operating Weight 1323860 lb - -
    Backhoe - Ground Pressure 26.7 N/cm2 (38.7 psi) - -
    Note Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. - -

    Service Refill Capacities
    Fuel Tank 3136 gal (US) 449 gal (US) -
    Hydraulic Tank 1876 gal (US) 253 gal (US) -
    Hydraulic System - Including Tank 2483 gal (US) 463 gal (US) -
    Engine Oil 86.6 gal (US) 23 gal (US) -
    Cooling System 211.4 gal (US) 44 gal (US) -
    Swing Drive 42.4 gal (US) 2.4 gal (US) -
    Grease Tank 188 gal (US) 18 gal (US) -

    Hydraulic System with Pump Managing System
    Main Pumps - Diesel Version 8 variable swash plate pumps - -
    Main Pumps - Maximum Oil Flow - Diesel Version 8 x 650 L/min (8 x 172 gal/min) - -
    Maximum Pressure - Attachment 4640 psi - -
    Maximum Pressure - Travel 5220 psi - -
    Swing Pumps - Diesel Version 4 reversible swash plate pumps - -
    Swing Pumps - Maximum Oil Flow - Diesel Version 4 x 352 L/min (4 x 93 gal/min) - -
    Maximum Pressure - Swing Pumps 5075 psi - -

    Hydraulic Oil Cooling
    Oil Flow of Cooling Pumps 4 x 488 L/min (4 x 129 gal/min) - -
    Components 4 cooling fans - -
    Diameter - Fan 46 in - -
    Features (1) Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running - -
    Features (2) Fan speed and flow of oil to the coolers are thermostatically controlled - -
    Features (3) Extremely high cooling efficiency to ensure optimum oil temperature - -
    Features (4) Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers - -

    Swing System
    Swing Drive 4 compact planetary transmissions with axial piston motors Two (2) compact planetary transmissions with axial piston motors -
    Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released - -
    Maximum Swing Speed 3.8 r/min 4.9 r/min -
    Swing Ring Triple-race roller bearing with sealed internal gearing Cross roller bearing with sealed internal gearing -
    Features (1) Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody Closed-loop swing circuit with speed control -
    Features (2) Closed-loop swing circuit with torque control Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking -
    Features (3) Hydraulic braking of the swing motion by counteracting control All raceways and the internal gearing of swing ring supplied by automatic central lubrication system -
    Features (4) All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system - -
    Parking Brake - Wet multiple disc brake, spring-loaded/hydraulically released -

    Undercarriage
    Travel Speed - 1st Stage - Maximum 0.68 mile/h - -
    Travel Speed - 2nd Stage - Maximum 0.99 mile/h - -
    Maximum Tractive Force 661160 lb 197157 lbf -
    Gradeability - Travel Drives - Maximum 39 % - -
    Track Pads - Each Side 42 - -
    Bottom Rollers - Each Side 7 - -
    Support Rollers - Each Side 2 plus a skid plate in between - -
    Travel Drives - Each Side 1 planetary transmission with 2 two-stage axial piston motors - -
    Components (1) HD tracks with cast double-grouser track pad Forged double-grouser track pads -
    Components (2) HD fixed axle rollers and idlers Chain links connected by hardened pins and bushings -
    Components (3) Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas Postive Pin Retention (PPR2) sealed and greased track design -
    Components (4) Acoustic travel alarm (forward and reverse) All running surfaces of sprockets, idlers, rollers and track chain links hardened -
    Components (5) Fully hydraulic, self-adjusting track tensioning system with piston accumulator Fully hydraulic self-adjusting track tensioning system with accumulator -
    Components (6) Automatic hydraulic retarder valve to prevent over-speed on downhill travel Automatic hydraulic retarder valve to prevent overspeed on downhill travel -
    Travel Speed - Two Stages - 1st Stage - Maximum - 1.6 mile/h -
    Travel Speed - Two Stages - 2nd Stage - Maximum - 2.3 mile/h -
    Maximum Drawbar Pull - Forward - 192886 lbf -
    Maximum Drawbar Pull - Reverse - 220987 lbf -
    Gradeability - Travel Drives - 38°/78% (SAE J1309) -
    Hydraulic Track Tensioning - With accumulator -
    Number of Shoes - Each Side - 46 -
    Number of Track Rollers - Each Side - 9 -
    Number of Carrier Rollers - Each Side - 3 -
    Components (7) - Audible travel alarm -

    Operator's Cab
    Operator's Eye Level - Approximately 24.91 ft - -
    Internal Dimensions of Cab - Length 7.33 ft - -
    Internal Dimensions of Cab - Width 5.33 ft - -
    Internal Dimensions of Cab - Height 6.75 ft - -
    Components (1) Single hydraulically driven HVAC System, with dual system option Pressurized operator station with positive filtration -
    Components (2) In-floor window with removable grate Heated cab mirror -
    Components (3) Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support Sliding upper door window (left-hand cab door) -
    Components (4) Independently adjustable seat consoles with integrated joysticks Glass-breaking safety hammer -
    Components (5) Operator Protective Guard (Top Guard) (ISO 10262:1998) Removable lower windshield with in cab storage bracket -
    Components (6) Elevated full-size trainer seat with safety belt and laptop desk Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM -
    Components (7) Additional fold-away auxiliary seat with safety belt Beverage holder -
    Components (8) Operator Presence switch Literature holder -
    Components (9) Monitoring system with 254 mm (10 in) touch screen AM/FM radio -
    Components (10) Powered 45 degree access stairway Radio with MP3 auxiliary audio port -
    Components (11) Emergency egress ladder Two stereo speakers -
    Components (12) FM/AM radio with USB and AUX input Storage shelf suitable for lunch or toolbox -
    Components (13) Roller blinds on 3 front windows Color LCD display with warning, filter/fluid change, and working hour information -
    Components (14) 3 cup holders Adjustable armrest -
    Components (15) Cat Electronic Technician service port Height-adjustable joystick consoles -
    Components (16) - Neutral lever (lock out) for all controls -
    Components (17) - Travel control pedals with removable hand levers -
    Components (18) - Two power outlets, 10 amp (total) -
    Components (19) - Laminated glass front upper window and tempered other windows -

    Automatic Lubrication System
    Capacity - Grease Container 188 gal (US) - -
    Type (1) Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times Central bank lubrication system -
    Type (2) System failures displayed by monitoring system Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing -
    Type (3) Grease filters (200 µm) between service station and container as well as directly behind grease pump Standard grease reel on machine for bucket linkage -
    Type (4) Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring Grease refill service point accessible from ground -
    Capacity - Grease Barrel - 18 gal (US) -

    Attachments
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces - -
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance - -
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) Constant boom momentum throughout the entire lift arc; Crowd force assistance - -
    All buckets (FS and BH) are equipped with a wear package consisting of: (1) Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth - -
    All buckets (FS and BH) are equipped with a wear package consisting of: (2) Wing shrouds on side walls and heel shrouds at bottom edges - -
    Type (1) Catwalks with rails at booms (FS and BH) Boom and stick torsion-resistant with welded box design -
    Type (2) Guards for shovel cylinders (FS) High-tensile steel with solid steel castings at pivot areas -
    Type (3) Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve Boom and stick stress-relieved after welding -
    Type (4) Service access holes from both sides of boom (FS and BH) and stick (FS) Float valve for boom down function -
    Type (5) Welding procedures allow for internal counter-welding (double prep weld) wherever possible - -
    Type (6) Booms and sticks are stress-relieved after welding - -
    Type (7) Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas - -
    Type (8) Special wear packages for highly abrasive materials available upon request - -
    Buckets Equipped With - – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds -

    Digging Forces
    Maximum Crowd Force 494410 lb - -
    Maximum Breakout Force 388780 lb - -

    Working Ranges
    Maximum Digging Height 51.17 ft - -
    Maximum Digging Reach 54.17 ft - -
    Maximum Digging Depth 9.17 ft - -

    Standard Bucket Capacity
    Face Shovel (heaped 2:1) 44.5 yd³ - -
    Backhoe (heaped 1:1) 44.5 yd³ - -

    Backhoe Attachment (BH) - Digging Forces
    Stick Digging Force - ISO 295740 lb 104761 lbf -
    Bucket Digging Force - ISO 274840 lb 120947 lbf -
    Bucket Digging Force - SAE - 112600 lbf -
    Stick Digging Force - SAE - 98800 lbf -

    Backhoe Attachment (BH) - Working Range
    Maximum Digging Height 52.83 ft 41.9 ft -
    Maximum Digging Reach 62.33 ft 45.6 ft -
    Maximum Digging Depth 29.17 ft 26.3 ft -
    Maximum Dump Height - 27.9 ft -

    Retractable Service Station
    Installation Retractable service station installed underneath the engine module and easily accessible from ground. - -
    Equipped With (1) Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container - -
    Equipped With (2) Cat jump-start socket - -
    Equipped With (3) Indicator lights - -

    Engine - U.S. EPA Tier 4 Final
    Engine Model - Cat® C27 -
    Gross Power - SAE J1995 - 824 HP -
    Net Power - SAE J1349 - 746 HP -

    Engine - Cat C27 with Tier 4 Final Emission Standards
    Number of Cylinders - 12 -
    Bore - 5.4 in -
    Stroke - 6 in -
    Displacement - 1648 in³ -

    Engine - Equivalent to U.S. EPA Tier 2
    Engine Model - Cat® C27 -
    Gross Power - SAE J1995 - 839 HP -
    Net Power - SAE J1349 - 746 HP -

    Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards
    Number of Cylinders - 12 -
    Bore - 5.4 in -
    Stroke - 6 in -
    Displacement - 1648 in³ -
    Aspiration - Turbocharged and air-to-air aftercooled -

    Operating Weights - Backhoe
    Operating Weight - 154 ton (US) -

    Weights
    Ground Pressure - 23.6 psi -
    Note - Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants -
    Operating Weight - 308000 lb -

    Track
    Standard - 28 in -
    Wide - 36 in -
    Extra Wide - 39 in -
    Number of Shoes - Each Side - 46 -
    Number of Track Rollers - Each Side - 9 -
    Number of Carrier Rollers - Each Side - 3 -
    Track Pads - Double grouser -

    Drive
    Travel Speed - Two Stages - 1st Stage - Maximum - 1.4 mile/h -
    Travel Speed - Two Stages - 2nd Stage - Maximum - 2.1 mile/h -
    Maximum Drawbar Pull - Forward - 192886 lbf -
    Maximum Drawbar Pull - Reverse - 220987 lbf -
    Gradeability - Travel Drives - Approximately 42% -
    Hydraulic Track Tensioning - With accumulator -
    Maximum Drawbar Pull - 179847 lbf -

    Hydraulic System
    Main Pumps - 3 × variable swash plate pumps -
    Main Pumps - Maximum Total Oil Flow - 407 gal/min -
    Main Pumps - Maximum Pressure - Attachment - 4641 psi -
    Pilot Pump - 1 × gear pump -
    Pilot Pump - Maximum Flow, Pilot - 40.4 gal/min -
    Pilot Pump - Maximum Pressure, Pilot - 1378 psi -
    Main Pumps - Maximum Pressure - Travel - 4641 psi -
    Swing Pump - 1 × variable swash plate pump -
    Engine Fan Pump - Maximum Flow, Engine Fan - 53.1 gal/min -
    Engine Fan Pump - Maximum Pressure, Engine Fan - 3191 psi -
    Engine Fan Pump - 1 × variable swash plate pump -
    Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan - 22.7 gal/min -
    Swing Pump - Maximum Flow - Swing - 127 gal/min -
    Hydraulic Fan Pump - 1 × variable swash plate pump -
    Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan - 1958 psi -
    Swing Pump - Maximum Pressure - Swing - 5294 psi -
    Hydraulic Oil Cooling - Maximum Flow - 284 gal/min -
    Hydraulic Oil Cooling - Diameter of Fan - 40 in -
    Filters (1) - Full-flow high-pressure filters (200 μm) for main pumps -
    Filters (2) - Full-flow filters (20 μm) for complete return circuit -
    Filters (3) - Pressure filters (16 μm) for servo circuit -
    Filters (4) - Full-flow filters (6 μm) for engine cooling return circuit -
    Filters (5) - Swing charge filter (15 μm) -
    Filters (6) - Pump case return screens (125 μm) -

    Centralized Service Area
    Feature - Accessible from ground level -
    Equipped With (1) - Emergency stop -
    Equipped With (2) - Quick couplings for: Diesel fuel and Grease -

    Backhoe Attachment (BH) - Backhoe
    Capacity 1:1 - 10.6 yd³ -
    Total Width - 8.8 ft -
    Number of Teeth - 5 -
    Tooth System - Cat C70 or M75 -
    Weight - Including Standard Wear Package - 18521 lb -
    Maximum Material Density - Loose - 3030 lb/yd³ -
    Add a Similar Product:
    • 6030 Hydraulic Shovel Add
    • 6040 Hydraulic Mining Shovel Add
    • 6020B Hydraulic Shovel Add