General

• Engine Output - SAE J1995 - 3015HP
• Bucket Payload - 67ton (US)
• Operating Weight - 660ton (US)
• Note - Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.

Engine

• Engine Model - 2 x Cat 3512E

Diesel Engines

• Rated Speed - 1,800 min-1 (1,800 rpm)
• Number of Cylinders - Each Engine - 12
• Bore - 6.69in
• Stroke - 8.46in
• Displacement - 3574in³
• Aspiration - Turbocharged and charge air-cooled
• Components (1) - Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
• Components (2) - High-capacity water separator
• Components (3) - Two-stage fuel filter with series filtration
• Components (4) - Heavy-duty air filters
• Components (5) - Microprocessed engine management
• Components (6) - Hydraulically driven radiator fan with electronically controlled fan speed
• Components (7) - Exhaust manifold and turbo heat shields

Diesel Engine - Lesser Regulated

• Gross Power - SAE J1995 - 3025HP
• Net Power - ISO 9249 - 2990HP
• Net Power - SAE J1349 - 2821HP
• Emissions - Optimized for fuel consumption.

Diesel Engine - Highly Regulated

• Gross Power - SAE J1995 - 3015HP
• Net Power - SAE J1349 - 2810HP
• Net Power - ISO 9249 - 2979HP
• Emissions - Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.

Electrical System

• System Voltage - 24 V
• Batteries in Series/Parallel Installation - 6 x 210 Ah; 12 V each; 630 Ah 24 V in total
• Components (1) - 6 maintenance-free batteries
• Components (2) - Lockable battery isolator switch
• Components (3) - Lockable starter isolator switch
• Components (4) - 13 LED high-brightness working flood lights
• Components (5) - 17 LED service lights
• Components (6) - 2 electric horns (1 cab module; 1 oil cooler module)

Operating Weights

• 6060 FS - Standard Track Pads - 4.58ft
• 6060 FS - Operating Weight - 1320110lb
• 6060 FS - Ground Pressure - 26.6 N/cm2 (38.5 psi)
• Backhoe - Standard Track Pads - 4.58ft
• Backhoe - Operating Weight - 1323860lb
• Backhoe - Ground Pressure - 26.7 N/cm2 (38.7 psi)
• Note - Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.

Service Refill Capacities

• Fuel Tank - 3136gal (US)
• Hydraulic Tank - 1876gal (US)
• Hydraulic System - Including Tank - 2483gal (US)
• Engine Oil - 86.6gal (US)
• Cooling System - 211.4gal (US)
• Swing Drive - 42.4gal (US)
• Grease Tank - 188gal (US)

Hydraulic System with Pump Managing System

• Main Pumps - Diesel Version - 8 variable swash plate pumps
• Main Pumps - Maximum Oil Flow - Diesel Version - 8 x 650 L/min (8 x 172 gal/min)
• Maximum Pressure - Attachment - 4640psi
• Maximum Pressure - Travel - 5220psi
• Swing Pumps - Diesel Version - 4 reversible swash plate pumps
• Swing Pumps - Maximum Oil Flow - Diesel Version - 4 x 352 L/min (4 x 93 gal/min)
• Maximum Pressure - Swing Pumps - 5075psi

Hydraulic Oil Cooling

• Oil Flow of Cooling Pumps - 4 x 488 L/min (4 x 129 gal/min)
• Components - 4 cooling fans
• Diameter - Fan - 46in
• Features (1) - Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
• Features (2) - Fan speed and flow of oil to the coolers are thermostatically controlled
• Features (3) - Extremely high cooling efficiency to ensure optimum oil temperature
• Features (4) - Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers

Swing System

• Swing Drive - 4 compact planetary transmissions with axial piston motors
• Parking Brakes - Wet multiple disc brake, spring loaded/hydraulically released
• Maximum Swing Speed - 3.8r/min
• Swing Ring - Triple-race roller bearing with sealed internal gearing
• Features (1) - Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
• Features (2) - Closed-loop swing circuit with torque control
• Features (3) - Hydraulic braking of the swing motion by counteracting control
• Features (4) - All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system

Undercarriage

• Travel Speed - 1st Stage - Maximum - 0.68mile/h
• Travel Speed - 2nd Stage - Maximum - 0.99mile/h
• Maximum Tractive Force - 661160lb
• Gradeability - Travel Drives - Maximum - 39%
• Track Pads - Each Side - 42
• Bottom Rollers - Each Side - 7
• Support Rollers - Each Side - 2 plus a skid plate in between
• Travel Drives - Each Side - 1 planetary transmission with 2 two-stage axial piston motors
• Components (1) - HD tracks with cast double-grouser track pad
• Components (2) - HD fixed axle rollers and idlers
• Components (3) - Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas
• Components (4) - Acoustic travel alarm (forward and reverse)
• Components (5) - Fully hydraulic, self-adjusting track tensioning system with piston accumulator
• Components (6) - Automatic hydraulic retarder valve to prevent over-speed on downhill travel

Operator's Cab

• Operator's Eye Level - Approximately - 24.91ft
• Internal Dimensions of Cab - Length - 7.33ft
• Internal Dimensions of Cab - Width - 5.33ft
• Internal Dimensions of Cab - Height - 6.75ft
• Components (1) - Single hydraulically driven HVAC System, with dual system option
• Components (2) - In-floor window with removable grate
• Components (3) - Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
• Components (4) - Independently adjustable seat consoles with integrated joysticks
• Components (5) - Operator Protective Guard (Top Guard) (ISO 10262:1998)
• Components (6) - Elevated full-size trainer seat with safety belt and laptop desk
• Components (7) - Additional fold-away auxiliary seat with safety belt
• Components (8) - Operator Presence switch
• Components (9) - Monitoring system with 254 mm (10 in) touch screen
• Components (10) - Powered 45 degree access stairway
• Components (11) - Emergency egress ladder
• Components (12) - FM/AM radio with USB and AUX input
• Components (13) - Roller blinds on 3 front windows
• Components (14) - 3 cup holders
• Components (15) - Cat Electronic Technician service port

Automatic Lubrication System

• Capacity - Grease Container - 188gal (US)
• Type (1) - Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
• Type (2) - System failures displayed by monitoring system
• Type (3) - Grease filters (200 µm) between service station and container as well as directly behind grease pump
• Type (4) - Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring

Attachments

• Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) - Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
• Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) - Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance
• Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) - Constant boom momentum throughout the entire lift arc; Crowd force assistance
• All buckets (FS and BH) are equipped with a wear package consisting of: (1) - Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
• All buckets (FS and BH) are equipped with a wear package consisting of: (2) - Wing shrouds on side walls and heel shrouds at bottom edges
• Type (1) - Catwalks with rails at booms (FS and BH)
• Type (2) - Guards for shovel cylinders (FS)
• Type (3) - Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
• Type (4) - Service access holes from both sides of boom (FS and BH) and stick (FS)
• Type (5) - Welding procedures allow for internal counter-welding (double prep weld) wherever possible
• Type (6) - Booms and sticks are stress-relieved after welding
• Type (7) - Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
• Type (8) - Special wear packages for highly abrasive materials available upon request

Digging Forces

• Maximum Crowd Force - 494410lb
• Maximum Breakout Force - 388780lb

Working Ranges

• Maximum Digging Height - 51.17ft
• Maximum Digging Reach - 54.17ft
• Maximum Digging Depth - 9.17ft

Standard Bucket Capacity

• Face Shovel (heaped 2:1) - 44.5yd³
• Backhoe (heaped 1:1) - 44.5yd³

Backhoe Attachment (BH) - Digging Forces

• Stick Digging Force - ISO - 295740lb
• Bucket Digging Force - ISO - 274840lb

Backhoe Attachment (BH) - Working Range

• Maximum Digging Height - 52.83ft
• Maximum Digging Reach - 62.33ft
• Maximum Digging Depth - 29.17ft

Retractable Service Station

• Installation - Retractable service station installed underneath the engine module and easily accessible from ground.
• Equipped With (1) - Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container
• Equipped With (2) - Cat jump-start socket
• Equipped With (3) - Indicator lights