Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.
Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions.
-
Engine
Engine Model
2 x Cat 3512E
-
-
Diesel Engines
Rated Speed
1,800 min-1 (1,800 rpm)
-
-
Number of Cylinders - Each Engine
12
12
-
Bore
6.69 in
5.42 in
-
Stroke
8.46 in
6 in
-
Displacement
3574 in³
1648 in³
-
Aspiration
Turbocharged and charge air-cooled
Turbocharged and air-to-air aftercooled
-
Components (1)
Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
Hydraulically driven radiator fan with electronically controlled fan speed
-
Components (2)
High-capacity water separator
Micro processed engine management
-
Components (3)
Two-stage fuel filter with series filtration
Heavy-duty air filters
-
Components (4)
Heavy-duty air filters
Two-stage fuel filter, including water separator
-
Components (5)
Microprocessed engine management
Additional high-capacity water separator
-
Components (6)
Hydraulically driven radiator fan with electronically controlled fan speed
-
-
Components (7)
Exhaust manifold and turbo heat shields
-
-
Emissions
-
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
-
Fuel Tank Capacity
-
1342 gal (US)
-
Diesel Engine - Lesser Regulated
Gross Power - SAE J1995
3025 HP
1531 HP
-
Net Power - ISO 9249
2990 HP
1511 HP
-
Net Power - SAE J1349
2821 HP
1425 HP
-
Emissions
Optimized for fuel consumption.
Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2
-
Diesel Engine - Highly Regulated
Gross Power - SAE J1995
3015 HP
1649 HP
-
Net Power - SAE J1349
2810 HP
1541 HP
-
Net Power - ISO 9249
2979 HP
1625 HP
-
Emissions
Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
-
Electrical System
System Voltage
24 V
-
-
Batteries in Series/Parallel Installation
6 x 210 Ah; 12 V each; 630 Ah 24 V in total
-
-
Components (1)
6 maintenance-free batteries
-
-
Components (2)
Lockable battery isolator switch
-
-
Components (3)
Lockable starter isolator switch
-
-
Components (4)
13 LED high-brightness working flood lights
-
-
Components (5)
17 LED service lights
-
-
Components (6)
2 electric horns (1 cab module; 1 oil cooler module)
-
-
Batteries
-
4 maintenance-free batteries
-
Operating Weights
6060 FS - Standard Track Pads
4.58 ft
-
-
6060 FS - Operating Weight
1320110 lb
-
-
6060 FS - Ground Pressure
26.6 N/cm2 (38.5 psi)
-
-
Backhoe - Standard Track Pads
4.58 ft
-
-
Backhoe - Operating Weight
1323860 lb
-
-
Backhoe - Ground Pressure
26.7 N/cm2 (38.7 psi)
-
-
Note
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants.
-
6030 FS - Standard Track Pads
-
3.25 ft
-
6030 FS - Operating Weight
-
657640 lb
-
6030 FS - Ground Pressure
-
32.2 psi
-
6030 - Standard Track Pads
-
3.25 ft
-
6030 - Operating Weight
-
660060 lb
-
6030 - Ground Pressure
-
32.3 psi
-
Service Refill Capacities
Fuel Tank
3136 gal (US)
-
-
Hydraulic Tank
1876 gal (US)
-
-
Hydraulic System - Including Tank
2483 gal (US)
-
-
Engine Oil
86.6 gal (US)
-
-
Cooling System
211.4 gal (US)
-
-
Swing Drive
42.4 gal (US)
-
-
Grease Tank
188 gal (US)
-
-
Hydraulic System with Pump Managing System
Main Pumps - Diesel Version
8 variable swash plate pumps
-
-
Main Pumps - Maximum Oil Flow - Diesel Version
8 x 650 L/min (8 x 172 gal/min)
4 x 552 L/min (4 x 146 gal/min)
-
Maximum Pressure - Attachment
4640 psi
4495 psi
-
Maximum Pressure - Travel
5220 psi
5220 psi
-
Swing Pumps - Diesel Version
4 reversible swash plate pumps
-
-
Swing Pumps - Maximum Oil Flow - Diesel Version
4 x 352 L/min (4 x 93 gal/min)
4 x 197 L/min (4 x 52 gal/min)
-
Maximum Pressure - Swing Pumps
5075 psi
5076 psi
-
Hydraulic Tank Capacity - Approximately
-
707 gal (US)
-
Total Volume of Hydraulic Oil - Approximately
-
925 gal (US)
-
Main Pumps
-
4 x variable swash plate pumps
-
Swing Pumps
-
2 x reversible swash plate double pumps
-
Hydraulic Oil Cooling
Oil Flow of Cooling Pumps
4 x 488 L/min (4 x 129 gal/min)
-
-
Components
4 cooling fans
-
-
Diameter - Fan
46 in
48 in
-
Features (1)
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
-
-
Features (2)
Fan speed and flow of oil to the coolers are thermostatically controlled
-
-
Features (3)
Extremely high cooling efficiency to ensure optimum oil temperature
-
-
Features (4)
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
-
-
Oil Flow of Cooling Pumps - Diesel Version
-
2 x 467 L/min (2 x 123 gal/min)
-
Swing System
Swing Drive
4 compact planetary transmissions with axial piston motors
2 compact planetary transmissions with axial piston motors
-
Parking Brakes
Wet multiple disc brake, spring loaded/hydraulically released
Wet multiple-disc brake, spring-loaded/hydraulically released
-
Maximum Swing Speed
3.8 r/min
-
-
Swing Ring
Triple-race roller bearing with sealed internal gearing
Triple-race roller bearing with sealed internal gearing
-
Features (1)
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
-
-
Features (2)
Closed-loop swing circuit with torque control
-
-
Features (3)
Hydraulic braking of the swing motion by counteracting control
-
-
Features (4)
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
-
-
Maximum Swing Speed - Diesel Version
-
4.6 r/min
-
Maximum Swing Speed - AC Version
-
5 r/min
-
Undercarriage
Travel Speed - 1st Stage - Maximum
0.68 mile/h
0.87 mile/h
-
Travel Speed - 2nd Stage - Maximum
0.99 mile/h
1.68 mile/h
-
Maximum Tractive Force
661160 lb
360144 ft·lbf
-
Gradeability - Travel Drives - Maximum
39 %
-
-
Track Pads - Each Side
42
44
-
Bottom Rollers - Each Side
7
7
-
Support Rollers - Each Side
2 plus a skid plate in between
2 plus a skid plate in between
-
Travel Drives - Each Side
1 planetary transmission with 2 two-stage axial piston motors
1 planetary transmission with 2 two-stage axial piston motors
-
Components (1)
HD tracks with cast double-grouser track pad
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
-
Components (2)
HD fixed axle rollers and idlers
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
-
Components (3)
Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
-
Components (4)
Acoustic travel alarm (forward and reverse)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
-
Components (5)
Fully hydraulic, self-adjusting track tensioning system with piston accumulator
Acoustic travel alarm
-
Components (6)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
-
-
Gradeability - Travel Drives - Approximate
-
47 %
-
Parking Brakes
-
Wet multiple disc brake, spring loaded/hydraulically released
-
Operator's Cab
Operator's Eye Level - Approximately
24.91 ft
21.33 ft
-
Internal Dimensions of Cab - Length
7.33 ft
7.22 ft
-
Internal Dimensions of Cab - Width
5.33 ft
5.25 ft
-
Internal Dimensions of Cab - Height
6.75 ft
7.05 ft
-
Components (1)
Single hydraulically driven HVAC System, with dual system option
Under roof mounted heating ventilating and air conditioning system
-
Components (2)
In-floor window with removable grate
External sun shields at side and rear windows
-
Components (3)
Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
Robust instrument panel including large colored BCS screen with transflective technology
-
Components (4)
Independently adjustable seat consoles with integrated joysticks
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
-
Components (5)
Operator Protective Guard (Top Guard) (ISO 10262:1998)
Hydraulically operated 45 degree access stairway
-
Components (6)
Elevated full-size trainer seat with safety belt and laptop desk
Emergency egress ladder with ladder cage
-
Components (7)
Additional fold-away auxiliary seat with safety belt
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
-
Components (8)
Operator Presence switch
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
-
Components (9)
Monitoring system with 254 mm (10 in) touch screen
Roller blinds at all windows
-
Components (10)
Powered 45 degree access stairway
Windshield with parallel intermittent wiper/washer
-
Components (11)
Emergency egress ladder
All-round safety glass, armored windshield and sliding side window
-
Components (12)
FM/AM radio with USB and AUX input
Operator Protective Guards (ISO 10262:1998 Level II
-
Components (13)
Roller blinds on 3 front windows
Joystick controls integrated in independently adjustable seat consoles
-
Components (14)
3 cup holders
Fold-away auxiliary seat with safety belt
-
Components (15)
Cat Electronic Technician service port
-
-
Automatic Lubrication System
Capacity - Grease Container
188 gal (US)
119 gal (US)
-
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
-
Type (2)
System failures displayed by monitoring system
Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
-
Type (3)
Grease filters (200 µm) between service station and container as well as directly behind grease pump
Lubricated pinion for greasing of internal gearing of swing ring
-
Type (4)
Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring
System failures displayed by Board Control System
-
Type (5)
-
Grease filters between service station and container as well as directly behind grease pump
-
Attachments
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
-
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)