Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.
Specifications above apply to the HRC Face Shovel configuration. Backhoe and Frontless configurations are also available for both HRC and LRC.
-
Engine
Engine Model
2 x Cat 3512E
2 x Cat C32
-
Gross Power - SAE J1995
-
2079 HP
-
Net Power - SAE J1349
-
1915 HP
-
Note
-
Power output relates to highly regulated engines. Lesser regulated engines are also available.
-
Diesel Engines
Rated Speed
1,800 min-1 (1,800 rpm)
-
-
Number of Cylinders - Each Engine
12
12
-
Bore
6.69 in
5.71 in
-
Stroke
8.46 in
6.38 in
-
Displacement
3574 in³
1959 in³
-
Aspiration
Turbocharged and charge air-cooled
Turbocharged and air-to-air aftercooled
-
Components (1)
Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
Additional high-capacity water separator
-
Components (2)
High-capacity water separator
Two-stage fuel filter including water separator
-
Components (3)
Two-stage fuel filter with series filtration
Heavy-duty air filters
-
Components (4)
Heavy-duty air filters
Microprocessed engine management
-
Components (5)
Microprocessed engine management
Hydraulically driven radiator fan with electronically controlled fan speed
-
Components (6)
Hydraulically driven radiator fan with electronically controlled fan speed
-
-
Components (7)
Exhaust manifold and turbo heat shields
-
-
Fuel Tank Capacity
-
2098 gal (US)
-
Emissions
-
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
-
Diesel Engine - Lesser Regulated
Gross Power - SAE J1995
3025 HP
-
-
Net Power - ISO 9249
2990 HP
-
-
Net Power - SAE J1349
2821 HP
-
-
Emissions
Optimized for fuel consumption.
-
-
Diesel Engine - Highly Regulated
Gross Power - SAE J1995
3015 HP
-
-
Net Power - SAE J1349
2810 HP
-
-
Net Power - ISO 9249
2979 HP
-
-
Emissions
Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.
-
-
Electrical System
System Voltage
24 V
-
-
Batteries in Series/Parallel Installation
6 x 210 Ah; 12 V each; 630 Ah 24 V in total
-
-
Components (1)
6 maintenance-free batteries
-
-
Components (2)
Lockable battery isolator switch
-
-
Components (3)
Lockable starter isolator switch
-
-
Components (4)
13 LED high-brightness working flood lights
-
-
Components (5)
17 LED service lights
-
-
Components (6)
2 electric horns (1 cab module; 1 oil cooler module)
-
-
Operating Weights
6060 FS - Standard Track Pads
4.58 ft
-
-
6060 FS - Operating Weight
1320110 lb
-
-
6060 FS - Ground Pressure
26.6 N/cm2 (38.5 psi)
-
-
Backhoe - Standard Track Pads
4.58 ft
-
-
Backhoe - Operating Weight
1323860 lb
-
-
Backhoe - Ground Pressure
26.7 N/cm2 (38.7 psi)
-
-
Note
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
1600 mm track pads available as option
-
6040 FS - Standard Track Pads
-
3.9 ft
-
6040 FS - Operating Weight
-
891980 lb
-
6040 FS - Ground Pressure
-
24.1 N/cm2 (35.0 psi)
-
6040 - Standard Track Pads
-
3.9 ft
-
6040 - Operating Weight
-
897930 lb
-
6040 - Ground Pressure
-
24.3 N/cm2 (35.3 psi)
-
6040 FS - Note
-
Other track pads available on request
-
Service Refill Capacities
Fuel Tank
3136 gal (US)
-
-
Hydraulic Tank
1876 gal (US)
-
-
Hydraulic System - Including Tank
2483 gal (US)
-
-
Engine Oil
86.6 gal (US)
-
-
Cooling System
211.4 gal (US)
-
-
Swing Drive
42.4 gal (US)
-
-
Grease Tank
188 gal (US)
-
-
Hydraulic System with Pump Managing System
Main Pumps - Diesel Version
8 variable swash plate pumps
4 x variable swash plate pumps
-
Main Pumps - Maximum Oil Flow - Diesel Version
8 x 650 L/min (8 x 172 gal/min)
4 x 724 L/min (4 x 191 gal/min)
-
Maximum Pressure - Attachment
4640 psi
4350 psi
-
Maximum Pressure - Travel
5220 psi
5080 psi
-
Swing Pumps - Diesel Version
4 reversible swash plate pumps
4 x reversible swash plate pump
-
Swing Pumps - Maximum Oil Flow - Diesel Version
4 x 352 L/min (4 x 93 gal/min)
4 x 321 L/min (4 x 85 gal/min)
-
Maximum Pressure - Swing Pumps
5075 psi
5080 psi
-
Hydraulic Tank Capacity - Diesel Version - Approximately
-
898 gal (US)
-
Total Volume of Hydraulic Oil - Diesel Version - Approximately
-
1532 gal (US)
-
Hydraulic Oil Cooling
Oil Flow of Cooling Pumps
4 x 488 L/min (4 x 129 gal/min)
-
-
Components
4 cooling fans
-
-
Diameter - Fan
46 in
2 × 1524 mm (2 × 60 in)
-
Features (1)
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
-
Features (2)
Fan speed and flow of oil to the coolers are thermostatically controlled
Fan speed is thermostatically controlled
-
Features (3)
Extremely high cooling efficiency to ensure optimum oil temperature
Extremely high cooling efficiency to ensure optimum oil temperature
-
Features (4)
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
-
-
Oil Flow of Cooling Pumps - Diesel Version
-
2 x 799 L/min (2 x 211 gal/min)
-
Components (1)
-
Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers
-
Components (2)
-
Variable axial piston pumps supplying low-volume, high-pressure oil to fans
-
Swing System
Swing Drive
4 compact planetary transmissions with axial piston motors
3 compact planetary transmissions with axial piston motors
-
Parking Brakes
Wet multiple disc brake, spring loaded/hydraulically released
-
-
Maximum Swing Speed
3.8 r/min
-
-
Swing Ring
Triple-race roller bearing with sealed internal gearing
Triple-race roller bearing with sealed internal gearing
-
Features (1)
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
-
Features (2)
Closed-loop swing circuit with torque control
Closed-loop swing circuit with torque control
-
Features (3)
Hydraulic braking of the swing motion by counteracting control
Hydraulic braking of the swing motion by counteracting control
-
Features (4)
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
-
Parking Brake
-
Wet multiple disc brake, spring-loaded/hydraulically released
-
Maximum Swing Speed - Diesel Version
-
4.7 r/min
-
Undercarriage
Travel Speed - 1st Stage - Maximum
0.68 mile/h
0.93 mile/h
-
Travel Speed - 2nd Stage - Maximum
0.99 mile/h
1.55 mile/h
-
Maximum Tractive Force
661160 lb
471260 lb
-
Gradeability - Travel Drives - Maximum
39 %
57 %
-
Track Pads - Each Side
42
42
-
Bottom Rollers - Each Side
7
7
-
Support Rollers - Each Side
2 plus a skid plate in between
2 plus a skid plate in between
-
Travel Drives - Each Side
1 planetary transmission with 2 two-stage axial piston motors
1 planetary transmission with 2 two-stage axial piston motors
-
Components (1)
HD tracks with cast double-grouser track pad
All running surfaces of sprockets, idlers, rollers and track links are hardened
-
Components (2)
HD fixed axle rollers and idlers
Acoustic travel alarm
-
Components (3)
Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
-
Components (4)
Acoustic travel alarm (forward and reverse)
All teeth contact areas of sprocket and pad links are hardened
-
Components (5)
Fully hydraulic, self-adjusting track tensioning system with piston accumulator
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
-
Components (6)
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
-
Parking Brake
-
Wet multiple disc brake, spring applied/hydraulically released
-
Operator's Cab
Operator's Eye Level - Approximately
24.91 ft
22.31 ft
-
Internal Dimensions of Cab - Length
7.33 ft
7.22 ft
-
Internal Dimensions of Cab - Width
5.33 ft
5.25 ft
-
Internal Dimensions of Cab - Height
6.75 ft
7.05 ft
-
Components (1)
Single hydraulically driven HVAC System, with dual system option
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
-
Components (2)
In-floor window with removable grate
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
-
Components (3)
Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
Roller blinds at all windows
-
Components (4)
Independently adjustable seat consoles with integrated joysticks
Windshield with parallel intermittent wiper/washer
-
Components (5)
Operator Protective Guard (Top Guard) (ISO 10262:1998)
All-round safety glass, armored windshield and sliding side window
-
Components (6)
Elevated full-size trainer seat with safety belt and laptop desk
Operator Protective Guard (Top Guard)
-
Components (7)
Additional fold-away auxiliary seat with safety belt
Single HVAC with option for Dual HVAC
-
Components (8)
Operator Presence switch
Joystick controls integrated in independently adjustable seat consoles
-
Components (9)
Monitoring system with 254 mm (10 in) touch screen
Fold-away auxiliary seat with safety belt
-
Components (10)
Powered 45 degree access stairway
External sun shields at side and rear windows
-
Components (11)
Emergency egress ladder
Sliding emergency ladder (kick-down type) with ladder cage
-
Components (12)
FM/AM radio with USB and AUX input
Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated
-
Components (13)
Roller blinds on 3 front windows
Robust instrument panel including large colored BCS screen with transflective technology
-
Components (14)
3 cup holders
-
-
Components (15)
Cat Electronic Technician service port
-
-
Board Control System (BCS III) Features (1)
-
USB, Lan (TCP/IP) and CAN BUS interfaces for data export
-
Board Control System (BCS III) Features (2)
-
On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
-
Board Control System (BCS III) Features (3)
-
Robust instrument panel including large (12 in) colored touch screen for intuitive handling
-
Board Control System (BCS III) Features (4)
-
Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems
-
Board Control System (BCS III) Features (5)
-
On-screen troubleshooting assistance
-
Board Control System (BCS III) Features (6)
-
Graphic charts of logged data
-
Board Control System (BCS III) Features (7)
-
Fault memory with storage of related conditions
-
Automatic Lubrication System
Capacity - Grease Container
188 gal (US)
188 gal (US)
-
Type (1)
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times
-
Type (2)
System failures displayed by monitoring system
System failures displayed by Board Control System
-
Type (3)
Grease filters (200 µm) between service station and container as well as directly behind grease pump
Grease filters (200 µm) between service station and container, as well as directly behind grease pump
-
Type (4)
Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring
Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders
-
Type (5)
-
Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring
-
Attachments
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces
-
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)