CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    16 Motor Grader
    View Product
    120 - 2019 - N Am, Global
    View Product Remove
    14 Motor Grader
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 290 HP - 238 HP
    Engine Model Cat® C13 Cat 7.1 Cat C13
    Bore 5.1 in 4.1 in 5.1 in
    Stroke 6.2 in 5.3 in 6.2 in
    Speed at Rated Power 2,000 rpm - 1,850 rpm
    Optimized VHP Range - Net 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 12176 ft - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1270 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1306 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1270 lb/ft - -
    Emissions (2) Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) 43% - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 39% - -
    Standard - Ambient Capability 122 °F - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 12973 ft - -
    VHP Range - Net - Metric 216-259 kW (294-353 hp) - -
    Base Power (1st Gear) - Net - Metric 294 HP - -
    Standard - Fan Speed - Minimum 550 rpm - 550 rpm
    Standard - Fan Speed - Maximum 1,450 rpm - 1,600 rpm
    Emissions (3) Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 39% - -
    Emissions (1) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - -
    VHP Range - Net 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 12500 ft - -
    Displacement 763 in³ 427.8 in³ 763 in³
    Number of Cylinders 6 6 6
    Note (2) - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Optimized VHP Plus is standard for the 14M3.
    Derating Altitude - 9842.5 ft -
    Maximum Torque - ISO 9249 - 606 lb/ft -
    All-Wheel Drive Net Power Range (Tier 3) - 130 HP -
    Net Power Range (Tier 3) - 130 HP -
    Note (3) - Power as declared per ISO 14396 Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Engine RPM - 2,000 -
    Maximum Torque - AWD On - 611 lb/ft -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Emissions - U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
    Standard Capability - 122 °F 122 °F
    Derating Altitude (AWD) - 5499 ft -
    Torque Rise - ISO 9294 - 42% -
    Torque Rise - - 41%
    Maximum Altitude - Full Power - - 13900 ft
    Maximum Torque - VHP Plus - - 1137 lb/ft
    Maximum Altitude - Full Power (Tier 3) - - 14349 ft
    Maximum Altitude - Full Power (Tier 2) - - 12049 ft
    Note (4) - - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
    Note (5) - - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

    Weights
    Operating Weight - Typically Equipped 71454 lb 16271 lb 57250 lb
    Gross Vehicle Weight - Base* - Total - - 50980 lb
    Gross Vehicle Weight - Base* - Front Axle - - 13994 lb
    Gross Vehicle Weight - Typically Equipped - Total - - 57250 lb
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 42005 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 15245 lb
    Gross Vehicle Weight - Base* - Rear Axle - - 36994 lb
    Note - - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

    Moldboard
    Blade Width 16 ft 12 ft 14 ft
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 5 in 4.1 in 4.6 in
    Note *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - -
    Thickness 1 in - -
    End Bit - Width 6 in - -
    Blade Pull* - Base GVW 41039 lb - -
    Cutting Edge Width 8 in - -
    Cutting Edge Thickness 1 in - -
    Down Force - Maximum GVW 43861 lb - -
    Height 31 in - -
    Width 16 ft - -
    Down Force - Base GVW 30743 lb - -
    Blade Pull* - Maximum GVW 52878 lb - -
    End Bit - Thickness 0.75 in - -
    Blade Height - 24 in -
    End Bit - 6 in -
    Cutting Edge - 6 in -
    Blade Width - With End Bits - - 169 in
    Blade Height - With Cutting Edge - - 24.9 in
    Blade Width - Without End Bits - - 164 in
    Blade Height - Without Cutting Edge - - 23 in

    Service Refill
    Fuel Capacity 131 gal (US) - -
    Cooling System 18.5 gal (US) - -
    DEF Tank 4.2 gal (US) - -
    Hydraulic System - Total 38.6 gal (US) - -
    Hydraulic System - Tank 18.5 gal (US) - -
    Engine Oil 9.5 gal (US) - -
    Transmission - Differential - Final Drives 34 gal (US) - -
    Tandem Housing - Each 34 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.24 gal (US) - -
    Circle Drive Housing 2.6 gal (US) - -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - -
    Transmission Direct drive, power shift, countershaft - -
    Brakes - Dynamic Brake Torque per Wheel 27069.27 lb/ft - -
    Brakes - Secondary Oil-actuated, oil-disc - -
    Brakes - Service Oil-actuated, oil disc - -
    Brakes - Parking Spring applied, hydraulically released - -

    Hydraulic System
    Circuit Type Electro-hydraulic load sensing, closed center - -
    Pump Type Variable piston - -
    Maximum System Pressure 3590 psi - -
    Standby Pressure 856 psi - -
    Pump Output* 74 gal/min - -
    Note *Pump output measured at 2,150 rpm. - -

    Blade Range
    Maximum Blade Position Angle 65° - -
    Maximum Lift Above Ground 15.7 in 16.1 in 16.5 in
    Maximum Depth of Cut 18.5 in 30.5 in 23.3 in
    Maximum Shoulder Reach Outside of Tires - Right 91 in - 78.9 in
    Moldboard Sideshift - Left 29.1 in - 29.1 in
    Circle Centershift - Right 22 in - 20.5 in
    Circle Centershift - Left 27.2 in - 25.6 in
    Moldboard Sideshift - Right 31.1 in - 31.1 in
    Maximum Shoulder Reach Outside of Tires - Left 91 in - 73.6 in
    Blade Tip Range - Forward 40° - 40°
    Blade Tip Range - Backward 5° - 5°
    Blade Tip Range Forward - 40 -
    Maximum Shoulder Reach Right - 76 in -
    Moldboard Side Shift Right - 26.1 in -
    Maximum Shoulder Reach Left - 69.4 in -
    Moldboard Side Shift Left - 20.1 in -
    Circle Center Shift Left - 26 in -
    Blade Tip Range Backward - 5 -
    Circle Center Shift Right - 26 in -

    Ripper
    Ripping Depth - Maximum 17.8 in - -
    Shank Holder Spacing - Minimum 17.5 in - -
    Shank Holder Spacing - Maximum 20 in - -
    Ripper Shank Holders 7 - -
    Penetration Force 30311 lb - -
    Pry-Out Force 43700 lb - -
    Machine Length Increase, Beam Raised 63.4 in - -

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total 84877 lb - -
    Gross Vehicle Weight - Base** - Total 63528 lb - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle 52201 lb - -
    Gross Vehicle Weight - Typically Equipped - Total 71454 lb - -
    Gross Vehicle Weight - Maximum Tested - Front Axle 26125 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle 19253 lb - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle 58753 lb - -
    Gross Vehicle Weight - Base** - Front Axle 17932 lb - -
    Gross Vehicle Weight - Base** - Rear Axle 45596 lb - -
    Note (1) *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. - -
    Note (2) **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. - -

    Dimensions (Approximate)
    Ground Clearance - Rear Axle 15.6 in - -
    Length - Counterweight to Ripper 474.4 in - -
    Length - Front Axle to Moldboard 120.7 in - -
    Length - Front Axle to Mid Tandem 290 in - -
    Height - Top of Cylinders 121.6 in - -
    Width - Tire Center Lines 106.4 in - -
    Width - Outside Rear Tires 134.3 in - -
    Length - Between Tandem Axles 72.5 in - -
    Height - Top of Cab 146.4 in - -
    Width - Outside Front Tires 134.3 in - -
    Height - Front Axle Center 28.9 in - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch 417 in - -
    Height - Exhaust Stack 140 in - -

    Standards
    Steering ISO 5010:2007 - -
    Brakes ISO 3450:2011 - -
    Sound ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 - -
    ROPS/FOPS ISO 3471:2008/ISO 3449:2005 - -
    Note (1) The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -
    Note (2) The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th 298 HP - -
    Gear - Forward 8th 348 HP - -
    Gear - Forward 3rd 298 HP - -
    Gear - Forward 6th 320 HP - -
    Gear - Forward 5th 311 HP - -
    Gear - Reverse 1st 290 HP - -
    Gear - Reverse 2nd 290 HP - -
    Gear - Forward 4th 304 HP - -
    Gear - Forward 7th 328 HP - -
    Gear - Forward 1st 290 HP - -
    Gear - Forward 2nd 290 HP - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th 309 HP - -
    Gear - Reverse 1st 294 HP - -
    Gear - Forward 3rd 302 HP - -
    Gear - Reverse 3rd-6th 302 HP - -
    Gear - Reverse 2nd 294 HP - -
    Gear - Forward 7th 332 HP - -
    Gear - Forward 6th 325 HP - -
    Gear - Forward 8th 353 HP - -
    Gear - Forward 1st 294 HP - -
    Gear - Forward 5th 315 HP - -
    Gear - Forward 2nd 294 HP - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) Tires: 23.5R25 Bridgestone VKT 2 Star - -
    Wheel Group - 19.5×25 MP (2) Tires: 23.5R25 Bridgestone VKT 1 Star - -
    Wheel Group - 19.5×25 MP (3) Tires: 23.5R25 Bridgestone VJT 1 Star - -
    Wheel Group - 19.5×25 MP (4) Tires: 23.5R25 Michelin XHA 2 Star - -
    Wheel Group - 19.5×25 MP (5) Tires: 23.5R25 Michelin XLDD 2 Star L5 - -

    Operating Specifications
    Note Calculated with no slip and 23.5 R25 L-3 tires. - -
    Steering Range - Left/Right 47.5° - -
    Forward - 6th 16 mile/h - -
    Forward - 4th 7.6 mile/h - -
    Forward - 5th 11.8 mile/h - -
    Turning Radius - Outside Front Tires 30.5 ft - -
    Forward - 7th 22 mile/h - -
    Top Speed - Forward 32.1 mile/h - -
    Forward - 3rd 5.5 mile/h - -
    Reverse - 6th 25.3 mile/h - -
    Reverse - 5th 17.4 mile/h - -
    Reverse - 2nd 4.1 mile/h - -
    Reverse - 3rd 6 mile/h - -
    Forward - 8th 32.1 mile/h - -
    Reverse - 1st 2.2 mile/h - -
    Forward - 1st 2.8 mile/h - -
    Top Speed - Reverse 25.4 mile/h - -
    Forward - 2nd 3.8 mile/h - -
    Reverse - 4th 9.3 mile/h - -
    Articulation Angle - Left/Right 20° - -

    Frame
    Front Frame Structure - Height 18.1 in - -
    Front Frame Structure - Width 14 in - -
    Drawbar - Width 3 in - -
    Drawbar - Height 8 in - -
    Front Axle - Total Oscillation per Side 35° - 32°
    Circle - Diameter 71.7 in - -
    Circle - Blade Beam Thickness 2 in - -
    Front Frame Structure - Thickness 0.6 in - -
    Front Axle - Wheel Lean 18° Left/17° Right - -
    Front Axle - Height to Center 26.4 in - -
    Circle - Outer Diameter - - 71.7 in
    Front Axle - Wheel Lean - Left/Right - - 17.1°

    Tandems
    Tandem Oscillation - Front Up 15° - -
    Sidewall Thickness - Outer 0.9 in - -
    Sidewall Thickness - Inner 0.9 in - -
    Tandem Oscillation - Front Down 25° - -
    Height 25.5 in - -
    Width 9.3 in - -
    Drive Chain Pitch 2.5 in - -
    Wheel Axle Spacing 72.5 in - -

    Service Refill Capacities
    Transmission and Differential - 9 gal (US) 23.5 gal (US)
    Circle Drive - 1.8 gal (US) 1.8 gal (US)
    Fuel Tank - 65 gal (US) 109.9 gal (US)
    Cooling System - 14 gal (US) 15.9 gal (US)
    Engine Crankcase - 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5 gal (US) 5.8 gal (US)
    Hydraulic System - 25.6 gal (US) 33 gal (US)

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - 35358 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb -

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

    Dimensions
    Maximum Height - 136.4 in -
    Length of Machine* - 387 in -
    Width All Wheel Drive (AWD) - 2551 mm -
    Width - 102 in -
    Note - *Typically equipped with push block and ripper. -
    Basic Blade Width - 12 ft -
    Add a Similar Product: