14 Motor Grader

Product description

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

Engine
  • Base Power (1st Gear) - Net - 238HP
  • Engine Model - Cat C13
  • Bore - 5.1in
  • Stroke - 6.2in
  • Speed at Rated Power - 1,850 rpm
  • Note (3) - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
  • Standard Capability - 122°F
  • Note (2) - Optimized VHP Plus is standard for the 14M3.
  • Torque Rise - 41%
  • Maximum Altitude - Full Power - 13900ft
  • Maximum Torque - VHP Plus - 1137lb/ft
  • Emissions - Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
  • Maximum Altitude - Full Power (Tier 3) - 14349ft
  • Maximum Altitude - Full Power (Tier 2) - 12049ft
  • Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
  • Standard - Fan Speed - Minimum - 550 rpm
  • Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
  • Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Standard - Fan Speed - Maximum - 1,600 rpm
  • Displacement - 763in³
  • Number of Cylinders - 6
Weights
  • Operating Weight - Typically Equipped - 57250lb
  • Gross Vehicle Weight - Base* - Total - 50980lb
  • Gross Vehicle Weight - Base* - Front Axle - 13994lb
  • Gross Vehicle Weight - Typically Equipped - Total - 57250lb
  • Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005lb
  • Gross Vehicle Weight - Typically Equipped - Front Axle - 15245lb
  • Gross Vehicle Weight - Base* - Rear Axle - 36994lb
  • Note - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Moldboard
  • Blade Width - 14ft
  • Arc Radius - 16.3in
  • Throat Clearance - 4.6in
  • Blade Width - With End Bits - 169in
  • Blade Height - With Cutting Edge - 24.9in
  • Blade Width - Without End Bits - 164in
  • Blade Height - Without Cutting Edge - 23in
Blade Range
  • Maximum Depth of Cut - 23.3in
  • Circle Centershift - Left - 25.6in
  • Maximum Lift Above Ground - 16.5in
  • Circle Centershift - Right - 20.5in
  • Blade Tip Range - Backward - 5°
  • Maximum Shoulder Reach Outside of Tires - Right - 78.9in
  • Moldboard Sideshift - Right - 31.1in
  • Moldboard Sideshift - Left - 29.1in
  • Maximum Shoulder Reach Outside of Tires - Left - 73.6in
  • Blade Tip Range - Forward - 40°
Frame
  • Circle - Outer Diameter - 71.7in
  • Front Axle - Wheel Lean - Left/Right - 17.1°
  • Front Axle - Total Oscillation per Side - 32°
Service Refill Capacities
  • Transmission and Differential - 23.5gal (US)
  • Diesel Exhaust Fluid Tank (Tier 4 Only) - 5.8gal (US)
  • Hydraulic System - 33gal (US)
  • Circle Drive - 1.8gal (US)
  • Cooling System - 15.9gal (US)
  • Fuel Tank - 109.9gal (US)
Air Conditioning System
  • Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Standard Equipment:
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Joystick, power adjustable armrests
    • Air conditioner with heater
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
    • Gauges, machine level
    • Message display
    • Joystick gear selection
    • Joystick hydraulic controls for implements, steering, transmission
    • Ladders, cab, left and right side
    • Lights, left and right side lights
    • Lights, night time cab, LED
    • Meter, hour, digital
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio ready, entertainment
    • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
    • Seat, mechanical suspension, cloth
    • Storage compartments
    • Throttle control, electronic
  • Power Train
    • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
    • Articulation, automatic Return-to-Center
    • Air-to-Air After Cooler (ATAAC)
    • Auto Diff Lock
    • Brake wear indication
    • Brakes, oil disc, four-wheel, hydraulic
    • Consistent power to ground
    • Monitoring system
    • Clutch, circle drive slip
    • Differential, lock/unlock*
    • Drain, engine oil, ecology
    • Demand fan, hydraulic
    • Engine ECO Mode
    • Ether starting aid
    • Fuel tank, ground level
    • Fuel-water separator
    • Hydraulic demand fan
    • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
    • Optimized VHP
    • Parking brake - multi disc, sealed, oil-cooled
    • Priming pump, fuel
    • Sediment drain, fuel tank
    • Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
    • Transmission, 8F/6R, power shift, direct drive
  • Electrical
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, HD, 1,125 CCA
    • Breaker panel
    • Electrical system, 24V*
    • Belt, serpentine, automatic tensioner
    • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
    • Product Link
    • Starter, electric
    • Service lights, enclosure, rear, LED
  • Safety
    • Alarm, back up
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Lockout, hydraulic implement for roading
    • Operator Not Present Monitoring system
    • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
    • Seat belt, retractable 76 mm (3 in)
    • Secondary steering
    • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
Optional Equipment:
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air horn
    • Heated door
    • Mirrors high visibility
    • Mirrors, outside heated 24V
    • Mirrors, outside mounted
    • Seat, heated
    • Seat, heated/ventilated
    • Rearview camera
    • Seat belt indicator
  • Power Train
    • Transmission, autoshift
    • Engine, compression brake
  • Technology
    • Cat GRADE with Cross Slope
    • Stable Blade
    • Advanced Control Joysticks
    • Auto Articulation
  • Guards
    • Debris guard
    • Front axle cylinder guards
    • Rear fenders
    • Sound suppression, engine enclosure and transmission
    • Transmission guard
    • Accumulators, blade lift
    • Fast fill fuel, 378.5 L/min (100 gal/min)
    • Metallic DCM wear strips
  • Electrical
    • Light, LED, warning strobe
    • Lights, front headlights high
    • Lights, front headlights low
    • Mounting, for warning light
    • Working lights halogen
    • Working lights LED
  • Safety
    • Additional rearview camera and monitor
    • Machine security system key
  • Other Attachments
    • Moldboard, 4.9 m (16 ft)
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
    • Product Link satellite, cellular
    • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
    • Snow wing, mounting frame ready
    • Fast fill
  • Work Tools/g.e.t.
    • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
    • Push block, counterweight
    • Ripper, rear
    • Tooth, ripper
  • Fluids
    • Coolant, -51 degrees C (-60 degrees F)
Compare Products