16 Motor Grader

Product description

Specially configured for mine operation and haul road development and maintenance, the Cat® 16 maximizes availability and controls operating costs. Fuel efficient technologies and legendary Cat robust design and construction ensure these machines help your operation optimize profits.

Engine
  • Base Power (1st Gear) - Net - 290HP
  • Engine Model - Cat® C13
  • Bore - 5.1in
  • Stroke - 6.2in
  • Speed at Rated Power - 2,000 rpm
  • Optimized VHP Range - Net - 216-259 kW (290-348 hp)
  • Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176ft
  • Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270lb/ft
  • Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) - 1306lb/ft
  • Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270lb/ft
  • Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
  • Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) - 43%
  • Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 39%
  • Standard - Ambient Capability - 122°F
  • Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973ft
  • VHP Range - Net - Metric - 216-259 kW (294-353 hp)
  • Base Power (1st Gear) - Net - Metric - 294HP
  • Standard - Fan Speed - Minimum - 550 rpm
  • Standard - Fan Speed - Maximum - 1,450 rpm
  • Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
  • Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 39%
  • Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
  • VHP Range - Net - 216-259 kW (290-348 hp)
  • Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) - 12500ft
  • Displacement - 763in³
  • Number of Cylinders - 6
Weights
  • Operating Weight - Typically Equipped - 71454lb
Moldboard
  • Blade Width - 16ft
  • Arc Radius - 16.3in
  • Throat Clearance - 5in
  • Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
  • Thickness - 1in
  • End Bit - Width - 6in
  • Blade Pull* - Base GVW - 41039lb
  • Cutting Edge Width - 8in
  • Cutting Edge Thickness - 1in
  • Down Force - Maximum GVW - 43861lb
  • Height - 31in
  • Width - 16ft
  • Down Force - Base GVW - 30743lb
  • Blade Pull* - Maximum GVW - 52878lb
  • End Bit - Thickness - 0.75in
Service Refill
  • Fuel Capacity - 131gal (US)
  • Cooling System - 18.5gal (US)
  • DEF Tank - 4.2gal (US)
  • Hydraulic System - Total - 38.6gal (US)
  • Hydraulic System - Tank - 18.5gal (US)
  • Engine Oil - 9.5gal (US)
  • Transmission - Differential - Final Drives - 34gal (US)
  • Tandem Housing - Each - 34gal (US)
  • Front Wheel Spindle Bearing Housing - 0.24gal (US)
  • Circle Drive Housing - 2.6gal (US)
Power Train
  • Forward/Reverse Gears - 8 Forward/6 Reverse
  • Transmission - Direct drive, power shift, countershaft
  • Brakes - Dynamic Brake Torque per Wheel - 27069.27lb/ft
  • Brakes - Secondary - Oil-actuated, oil-disc
  • Brakes - Service - Oil-actuated, oil disc
  • Brakes - Parking - Spring applied, hydraulically released
Hydraulic System
  • Circuit Type - Electro-hydraulic load sensing, closed center
  • Pump Type - Variable piston
  • Maximum System Pressure - 3590psi
  • Standby Pressure - 856psi
  • Pump Output* - 74gal/min
  • Note - *Pump output measured at 2,150 rpm.
Blade Range
  • Maximum Blade Position Angle - 65°
  • Maximum Lift Above Ground - 15.7in
  • Maximum Depth of Cut - 18.5in
  • Maximum Shoulder Reach Outside of Tires - Right - 91in
  • Moldboard Sideshift - Left - 29.1in
  • Circle Centershift - Right - 22in
  • Circle Centershift - Left - 27.2in
  • Moldboard Sideshift - Right - 31.1in
  • Maximum Shoulder Reach Outside of Tires - Left - 91in
  • Blade Tip Range - Forward - 40°
  • Blade Tip Range - Backward - 5°
Ripper
  • Ripping Depth - Maximum - 17.8in
  • Shank Holder Spacing - Minimum - 17.5in
  • Shank Holder Spacing - Maximum - 20in
  • Ripper Shank Holders - 7
  • Penetration Force - 30311lb
  • Pry-Out Force - 43700lb
  • Machine Length Increase, Beam Raised - 63.4in
Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
  • Gross Vehicle Weight - Maximum Tested - Total - 84877lb
  • Gross Vehicle Weight - Base** - Total - 63528lb
  • Gross Vehicle Weight - Typically Equipped - Rear Axle - 52201lb
  • Gross Vehicle Weight - Typically Equipped - Total - 71454lb
  • Gross Vehicle Weight - Maximum Tested - Front Axle - 26125lb
  • Gross Vehicle Weight - Typically Equipped - Front Axle - 19253lb
  • Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753lb
  • Gross Vehicle Weight - Base** - Front Axle - 17932lb
  • Gross Vehicle Weight - Base** - Rear Axle - 45596lb
  • Note (1) - *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
  • Note (2) - **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
Dimensions (Approximate)
  • Ground Clearance - Rear Axle - 15.6in
  • Length - Counterweight to Ripper - 474.4in
  • Length - Front Axle to Moldboard - 120.7in
  • Length - Front Axle to Mid Tandem - 290in
  • Height - Top of Cylinders - 121.6in
  • Width - Tire Center Lines - 106.4in
  • Width - Outside Rear Tires - 134.3in
  • Length - Between Tandem Axles - 72.5in
  • Height - Top of Cab - 146.4in
  • Width - Outside Front Tires - 134.3in
  • Height - Front Axle Center - 28.9in
  • Length - Front Tire to Rear of Machine - Including Tow Hitch - 417in
  • Height - Exhaust Stack - 140in
Standards
  • Steering - ISO 5010:2007
  • Brakes - ISO 3450:2011
  • Sound - ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
  • ROPS/FOPS - ISO 3471:2008/ISO 3449:2005
  • Note (1) - The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
  • Note (2) - The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
  • Gear - Reverse 3rd-6th - 298HP
  • Gear - Forward 8th - 348HP
  • Gear - Forward 3rd - 298HP
  • Gear - Forward 6th - 320HP
  • Gear - Forward 5th - 311HP
  • Gear - Reverse 1st - 290HP
  • Gear - Reverse 2nd - 290HP
  • Gear - Forward 4th - 304HP
  • Gear - Forward 7th - 328HP
  • Gear - Forward 1st - 290HP
  • Gear - Forward 2nd - 290HP
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
  • Gear - Forward 4th - 309HP
  • Gear - Reverse 1st - 294HP
  • Gear - Forward 3rd - 302HP
  • Gear - Reverse 3rd-6th - 302HP
  • Gear - Reverse 2nd - 294HP
  • Gear - Forward 7th - 332HP
  • Gear - Forward 6th - 325HP
  • Gear - Forward 8th - 353HP
  • Gear - Forward 1st - 294HP
  • Gear - Forward 5th - 315HP
  • Gear - Forward 2nd - 294HP
Optional Tire Arrangements
  • Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star
  • Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star
  • Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star
  • Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star
  • Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5
Operating Specifications
  • Note - Calculated with no slip and 23.5 R25 L-3 tires.
  • Steering Range - Left/Right - 47.5°
  • Forward - 6th - 16mile/h
  • Forward - 4th - 7.6mile/h
  • Forward - 5th - 11.8mile/h
  • Turning Radius - Outside Front Tires - 30.5ft
  • Forward - 7th - 22mile/h
  • Top Speed - Forward - 32.1mile/h
  • Forward - 3rd - 5.5mile/h
  • Reverse - 6th - 25.3mile/h
  • Reverse - 5th - 17.4mile/h
  • Reverse - 2nd - 4.1mile/h
  • Reverse - 3rd - 6mile/h
  • Forward - 8th - 32.1mile/h
  • Reverse - 1st - 2.2mile/h
  • Forward - 1st - 2.8mile/h
  • Top Speed - Reverse - 25.4mile/h
  • Forward - 2nd - 3.8mile/h
  • Reverse - 4th - 9.3mile/h
  • Articulation Angle - Left/Right - 20°
Frame
  • Front Frame Structure - Height - 18.1in
  • Front Frame Structure - Width - 14in
  • Drawbar - Width - 3in
  • Drawbar - Height - 8in
  • Front Axle - Total Oscillation per Side - 35°
  • Circle - Diameter - 71.7in
  • Circle - Blade Beam Thickness - 2in
  • Front Frame Structure - Thickness - 0.6in
  • Front Axle - Wheel Lean - 18° Left/17° Right
  • Front Axle - Height to Center - 26.4in
Tandems
  • Tandem Oscillation - Front Up - 15°
  • Sidewall Thickness - Outer - 0.9in
  • Sidewall Thickness - Inner - 0.9in
  • Tandem Oscillation - Front Down - 25°
  • Height - 25.5in
  • Width - 9.3in
  • Drive Chain Pitch - 2.5in
  • Wheel Axle Spacing - 72.5in
Standard Equipment:
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Adjustable Electric Arm rest
    • Adjustable wrist rest
    • Air conditioner with heater
    • Articulation, automatic Return-to-Center
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
    • Gauges, machine level
    • Information display touch screen
    • Joystick gear selection
    • Joystick hydraulic controls for implements, steering, transmission
    • Ladders, cab, left and right side
    • Lights, left and right side lights
    • Lights, night time cab
    • Meter, hour, digital
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio ready, entertainment
    • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
    • Seat, cloth-covered, comfort air suspension
    • Storage compartments
    • Throttle control, electronic
  • Power Train
    • Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
    • Air-to-air after cooler (ATAAC)
    • Auto Diff Lock
    • Belt, serpentine, automatic tensioner
    • Brake wear indication
    • Brakes, oil disc, four-wheel, hydraulic
    • Consistent Power to ground
    • Critically Low Fluid Level Monitoring System
    • Differential, lock/unlock
    • Drain, engine oil, high speed
    • Electronic over speed protection
    • Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
    • Engine, compression brake
    • Ether starting aid
    • Fuel tank, fast fill, ground level
    • Fuel-water separator
    • Hydraulic Demand Fan
    • Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
    • OK-to-Start
    • Optimized VHP
    • Parking brake – multi disc, sealed, oil-cooled
    • Priming pump, fuel
    • Rear axle, modular
    • Sediment drain, fuel tank
    • Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
    • Transmission, 8F/6R, power shift
    • VIMS no telematics
  • Electrical
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, heavy duty, 1,400 CCA
    • Breaker panel
    • Electrical system, 24V
    • Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
    • Product Link
    • Starter, electric, heavy duty
  • Safety
    • Alarm, back up
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Lockout, hydraulic implement for roading
    • Operator not present monitoring System
    • Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
    • Rearview camera
    • Seat belt indicator
    • Seat belt, retractable 76 mm (3 in)
    • Secondary steering
    • Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
    • Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
  • Other Standard Equipment
    • 3-Bolt blade Bracket
    • AccuGrade ARO
    • Accumulators, blade lift
    • Brake accumulators, dual certified
    • Cat Grade Control Cross Slope
    • CD ROM Parts Book
    • Clutch, circle drive slip
    • Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
    • Doors (four), engine compartment, (two left, two right hand) locking
    • Doors, two service, left and right side
    • Drawbar – six shoe with replaceable wear strips
    • End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
    • Fast fill fuel, 567.8 L/min (150 gpm)
    • Fluid check
    • Frame, articulated, with safety lock
    • Hydraulics, load-sensing
    • Metallic Fuel tank, 496 L (131 gal)
    • Metallic DCM wear strips
    • Modular cooling package
    • Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
    • Radiator, two cleanout access doors
    • Rear bumper
    • Rear tandem access steps and hand bars
    • S∙O∙S ports: engine, hydraulic, transmission, coolant
    • Tandem walkway
    • Top adjust circle wear strips
    • Tow hitch (not available with ripper)
  • Tires, Rims, And Wheels
    • A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
  • Fluids
    • Extended Life Coolant to –35° C (–31° F)
  • Work Tools/g.e.t.
    • 4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
Optional Equipment:
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air horn
    • Comfort package
    • Heated door
    • Mirrors high visibility
    • Mirrors, outside heated 24V
    • Mirrors, outside mounted
    • Seat heated
    • Seat heated/ventilated
    • Windows cleaning platform and ladders left-right hand side
  • Power Train
    • Transmission, autoshift
  • Guards
    • Debris guard
    • Front axle cylinder guard
    • Rear fenders
    • Sound suppression, engine enclosure and transmission
    • Transmission guard
  • Electrical
    • Light, LED, warning strobe
    • Lights front LED
    • Lights, front headlights high
    • Lights, front headlights low
    • Mounting, for warning light
    • Service lights
    • Working lights halogen
    • Working lights LED
  • Safety
    • Additional monitor for rearview camera
    • Enhanced access platform
    • Fire suppression ready
    • Machine Security System Key
    • Service access platform
  • Other Attachments
    • Auto-lube, Centro-matic
    • Auto-lube, ripper enhancement
    • Control, blade, variable float
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    • Hydraulic arrangements with additional hydraulic valves Base+1
    • Hydraulic arrangements with additional hydraulic valves Base+5
    • Product Link Elite dual
    • Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
    • Weather, Cold Plus package
  • Work Tools/g.e.t.
    • 4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)
    • Push block, counterweight
    • Ripper, rear
    • Tooth, ripper
  • Fluids
    • Coolant, –51° C (–60° F)
Compare Products