Weights

• Operating Weight - Typically Equipped - 16271lb

Machine Weight

• Lever/Steering Wheel Weight* Tier 4 - 35067lb
• Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731lb
• Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
• Joystick Weight* Tier 4 - 35358lb
• Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846lb

Moldboard

• Blade Width - 12ft
• Blade Height - 24in
• Throat Clearance - 4.1in
• Arc Radius - 16.3in
• End Bit - 6in
• Cutting Edge - 6in

Dimensions

• Basic Blade Width - 12ft
• Maximum Height - 136.4in
• Length of Machine* - 387in
• Width All Wheel Drive (AWD) - 2551mm
• Width - 102in
• Note - *Typically equipped with push block and ripper.

Engine

• Note (2) - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
• Displacement - 427.8in³
• Derating Altitude - 9842.5ft
• Maximum Torque - ISO 9249 - 606lb/ft
• All-Wheel Drive Net Power Range (Tier 3) - 130HP
• Net Power Range (Tier 3) - 130HP
• Note (3) - Power as declared per ISO 14396
• Bore - 4.1in
• Engine RPM - 2,000
• Maximum Torque - AWD On - 611lb/ft
• Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
• Engine Model - Cat 7.1
• Stroke - 5.3in
• Emissions - U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
• Standard Capability - 122°F
• Number of Cylinders - 6
• Derating Altitude (AWD) - 5499ft
• Torque Rise - ISO 9294 - 42%

Service Refill Capacities

• Transmission and Differential - 9gal (US)
• Circle Drive - 1.8gal (US)
• Fuel Tank - 65gal (US)
• Cooling System - 14gal (US)
• Engine Crankcase - 4.8gal (US)
• Diesel Exhaust Fluid Tank (Tier 4 Only) - 5gal (US)
• Hydraulic System - 25.6gal (US)

Blade Range

• Blade Tip Range Forward - 40
• Maximum Shoulder Reach Right - 76in
• Moldboard Side Shift Right - 26.1in
• Maximum Shoulder Reach Left - 69.4in
• Maximum Depth of Cut - 30.5in
• Moldboard Side Shift Left - 20.1in
• Circle Center Shift Left - 26in
• Blade Tip Range Backward - 5
• Maximum Lift Above Ground - 16.1in
• Circle Center Shift Right - 26in

Air Conditioning System

• Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.