Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Standard Capability
122 °F
-
-
Note (2)
Optimized VHP Plus is standard for the 14M3.
-
-
Torque Rise
41%
-
-
Maximum Altitude - Full Power
13900 ft
-
-
Maximum Torque - VHP Plus
1137 lb/ft
-
-
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
-
-
Maximum Altitude - Full Power (Tier 3)
14349 ft
-
-
Maximum Altitude - Full Power (Tier 2)
12049 ft
-
-
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
-
-
Standard - Fan Speed - Minimum
550 rpm
550 rpm
-
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
-
-
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005 lb
-
-
Gross Vehicle Weight - Typically Equipped - Front Axle
15245 lb
-
-
Gross Vehicle Weight - Base* - Rear Axle
36994 lb
-
-
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
-
-
Moldboard
Blade Width
14 ft
16 ft
-
Arc Radius
16.3 in
16.3 in
-
Throat Clearance
4.6 in
5 in
-
Blade Width - With End Bits
169 in
-
-
Blade Height - With Cutting Edge
24.9 in
-
-
Blade Width - Without End Bits
164 in
-
-
Blade Height - Without Cutting Edge
23 in
-
-
Note
-
*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
-
Thickness
-
1 in
-
End Bit - Width
-
6 in
-
Blade Pull* - Base GVW
-
41039 lb
-
Cutting Edge Width
-
8 in
-
Cutting Edge Thickness
-
1 in
-
Down Force - Maximum GVW
-
43861 lb
-
Height
-
31 in
-
Width
-
16 ft
-
Down Force - Base GVW
-
30743 lb
-
Blade Pull* - Maximum GVW
-
52878 lb
-
End Bit - Thickness
-
0.75 in
-
Blade Range
Maximum Depth of Cut
23.3 in
18.5 in
-
Circle Centershift - Left
25.6 in
27.2 in
-
Maximum Lift Above Ground
16.5 in
15.7 in
-
Circle Centershift - Right
20.5 in
22 in
-
Blade Tip Range - Backward
5°
5°
-
Maximum Shoulder Reach Outside of Tires - Right
78.9 in
91 in
-
Moldboard Sideshift - Right
31.1 in
31.1 in
-
Moldboard Sideshift - Left
29.1 in
29.1 in
-
Maximum Shoulder Reach Outside of Tires - Left
73.6 in
91 in
-
Blade Tip Range - Forward
40°
40°
-
Maximum Blade Position Angle
-
65°
-
Frame
Circle - Outer Diameter
71.7 in
-
-
Front Axle - Wheel Lean - Left/Right
17.1°
-
-
Front Axle - Total Oscillation per Side
32°
35°
-
Front Frame Structure - Height
-
18.1 in
-
Front Frame Structure - Width
-
14 in
-
Drawbar - Width
-
3 in
-
Drawbar - Height
-
8 in
-
Circle - Diameter
-
71.7 in
-
Circle - Blade Beam Thickness
-
2 in
-
Front Frame Structure - Thickness
-
0.6 in
-
Front Axle - Wheel Lean
-
18° Left/17° Right
-
Front Axle - Height to Center
-
26.4 in
-
Service Refill Capacities
Transmission and Differential
23.5 gal (US)
-
-
Diesel Exhaust Fluid Tank (Tier 4 Only)
5.8 gal (US)
-
-
Hydraulic System
33 gal (US)
-
-
Circle Drive
1.8 gal (US)
-
-
Cooling System
15.9 gal (US)
-
-
Fuel Tank
109.9 gal (US)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Gross Vehicle Weight - Typically Equipped - Rear Axle
-
52201 lb
-
Gross Vehicle Weight - Typically Equipped - Total
-
71454 lb
-
Gross Vehicle Weight - Maximum Tested - Front Axle
-
26125 lb
-
Gross Vehicle Weight - Typically Equipped - Front Axle
-
19253 lb
-
Gross Vehicle Weight - Maximum Tested - Rear Axle
-
58753 lb
-
Gross Vehicle Weight - Base** - Front Axle
-
17932 lb
-
Gross Vehicle Weight - Base** - Rear Axle
-
45596 lb
-
Note (1)
-
*For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
-
Note (2)
-
**Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
-
Dimensions (Approximate)
Ground Clearance - Rear Axle
-
15.6 in
-
Length - Counterweight to Ripper
-
474.4 in
-
Length - Front Axle to Moldboard
-
120.7 in
-
Length - Front Axle to Mid Tandem
-
290 in
-
Height - Top of Cylinders
-
121.6 in
-
Width - Tire Center Lines
-
106.4 in
-
Width - Outside Rear Tires
-
134.3 in
-
Length - Between Tandem Axles
-
72.5 in
-
Height - Top of Cab
-
146.4 in
-
Width - Outside Front Tires
-
134.3 in
-
Height - Front Axle Center
-
28.9 in
-
Length - Front Tire to Rear of Machine - Including Tow Hitch
-
417 in
-
Height - Exhaust Stack
-
140 in
-
Standards
Steering
-
ISO 5010:2007
-
Brakes
-
ISO 3450:2011
-
Sound
-
ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
-
ROPS/FOPS
-
ISO 3471:2008/ISO 3449:2005
-
Note (1)
-
The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
-
Note (2)
-
The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
-
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net