Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
-
Displacement
567.5 in³
763 in³
-
Stroke
5.9 in
6.2 in
-
Number of Cylinders
6
6
-
Torque Rise - ISO 9294
44%
-
-
Base Power (1st Gear) - Net
-
238 hp
-
Speed at Rated Power
-
1,850 rpm
-
Note (3)
-
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (2)
-
Optimized VHP Plus is standard for the 14M3.
-
Torque Rise
-
41%
-
Maximum Altitude - Full Power
-
13900 ft
-
Maximum Torque - VHP Plus
-
1137 lb/ft
-
Maximum Altitude - Full Power (Tier 3)
-
14349 ft
-
Maximum Altitude - Full Power (Tier 2)
-
12049 ft
-
Note (1)
-
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
-
Standard - Fan Speed - Minimum
-
550 rpm
-
Note (4)
-
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
-
Note (5)
-
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
Standard - Fan Speed - Maximum
-
1,600 rpm
-
Weights
Operating Weight - Typically Equipped
44613 lb
57250 lb
-
Gross Vehicle Weight - Base* - Total
-
50980 lb
-
Gross Vehicle Weight - Base* - Front Axle
-
13994 lb
-
Gross Vehicle Weight - Typically Equipped - Total
-
57250 lb
-
Gross Vehicle Weight - Typically Equipped - Rear Axle
-
42005 lb
-
Gross Vehicle Weight - Typically Equipped - Front Axle
-
15245 lb
-
Gross Vehicle Weight - Base* - Rear Axle
-
36994 lb
-
Note
-
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
-
Moldboard
Blade Width
12 ft
14 ft
-
Cutting Edge
6 in
-
-
Arc Radius
16.3 in
16.3 in
-
Throat Clearance
6.5 in
4.6 in
-
End Bit
6 in
-
-
Blade Width - With End Bits
-
169 in
-
Blade Height - With Cutting Edge
-
24.9 in
-
Blade Width - Without End Bits
-
164 in
-
Blade Height - Without Cutting Edge
-
23 in
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
