Compare Equipment Go Back
 140 Motor Grader LVR |
|
|
|
Engine |
|||
|---|---|---|---|
| Net Power - EEC 80/1269 | 250 HP | - | - |
| Net Power - ISO 9249/SAE J1349 | 250 HP | - | - |
| Standard Capability | 109 °F | - | - |
| Engine RPM | 2,000 | - | - |
| Engine Model | Cat C9.3 | - | - |
| Bore | 4.5 in | - | - |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V | - | - |
| Displacement | 567.5 in³ | - | - |
| Stroke | 5.9 in | - | - |
| Number of Cylinders | 6 | - | - |
| Torque Rise - ISO 9294 | 44% | - | - |
Weights |
|||
| Operating Weight - Typically Equipped | 20236 lb | - | - |
Machine Weight |
|||
| Weight* | 42325 lb | - | - |
| Note | *Typically equipped with push block and ripper. | - | - |
| All-Wheel Drive (AWD) Weight | 44613 lb | - | - |
Moldboard |
|||
| Blade Width | 12 ft | - | - |
| Cutting Edge | 6 in | - | - |
| Arc Radius | 16.3 in | - | - |
| Throat Clearance | 6.5 in | - | - |
| End Bit | 6 in | - | - |
Dimensions |
|||
| Basic Blade Width | 140 in | - | - |
| Length of Machine* | 397.6 in | - | - |
| Width | 97.6 in | - | - |
| Note | *Typically equipped with push block and ripper. | - | - |
| Maximum Height | 132 in | - | - |
Service Refill |
|||
| Hydraulic System | 14.5 gal (US) | - | - |
| Engine Crankcase | 7.9 gal (US) | - | - |
| Circle Drive | 1.8 gal (US) | - | - |
| Fuel Tank | 100 gal (US) | - | - |
| Front Wheel Spindle Bearing - Each | 0.13 gal (US) | - | - |
Blade Range |
|||
| Maximum Lift Above Ground | 18.9 in | - | - |
| Maximum Depth of Cut | 28.9 in | - | - |
