CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    920 Compact Wheel Loader
    View Product
    986 Wheel Loader
    View Product Remove
    988 GC Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 121 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 2200 r/min - -
    Rated Net Power - SAE J1349 120 HP - -
    Maximum Gross Power - ISO 14396 (metric) 122 HP - -
    Rated Net Power - ISO 9249 118 HP - -
    Maximum Gross Torque - SAE J1995 372 ft·lbf - -
    Maximum Gross Torque - ISO 14396 369 ft·lbf - -
    Maximum Net Torque - SAE J1349 366 ft·lbf - -
    Maximum Net Torque - ISO 9249 363 ft·lbf - -
    Displacement 220 in³ 927 in² 927 in³
    Bore 3.85 in 5.4 in 5.4 in
    Stroke 4.72 in 6.75 in 6.75 in
    Engine Model Cat C3.6 C15 Cat® Cat® C15
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 121 HP - -
    Peak Power Speed - 1600 1600
    Peak Power Speed - Gross - SAE J1995 - 456 HP -
    Engine Power - ISO 14396 - 449 HP 449 HP
    Net Power - SAE J1349 - 373 HP 373 HP
    Rated Speed - 2000 2000
    Rated Speed - 2,000 rpm - EEC 80/1269 - 373 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - 378 HP -
    Rated Speed - 2,000 rpm - ISO 9249 - 373 HP -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - 378 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 lb/ft 1778 ft·lbf
    Torque Rise - 16% 16%
    Gross Power - SAE J1995 - - 456 HP

    Weights
    Operating Weight 21742 lb - -

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) - 6.4-7.6 m3 (8.3-10 yd3)
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% - 96%

    Service Refill Capacities
    Transmission 0.8 gal (US) 20 gal (US) 20 gal (US)
    Engine Crankcase 2.6 gal (US) - 9 gal (US)
    Axles - Rear 4.5 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Cooling System 5.7 gal (US) - 27 gal (US)
    Fuel Tank 43.6 gal (US) 141 gal (US) 141 gal (US)
    Hydraulic Tank 14.5 gal (US) - -
    Note DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Axles - Front 4.5 gal (US) - -
    Fuel Tank - Short Lift - 127 gal (US) -
    Cooling Systems - 26 gal (US) -
    Crankcase - 9 gal (US) -
    Diesel Exhaust Fluid Tank - 6 gal (US) 5.5 gal (US)
    Axle Oil - Differentials and Final Drives - Front - 49 gal (US) -
    Axle Oil - Differentials and Final Drives - Rear - 45 gal (US) -
    Hydraulic System Factory Fill - 87 gal (US) -
    Hydraulic System - Tank Only - 34 gal (US) -
    Differential - Final Drives - Front - - 49 gal (US)
    Differential - Final Drives - Rear - - 45 gal (US)

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -

    Loader Hydraulic System
    Maximum Flow - Implement Pump 43.6 gal/min - -
    Relief Pressure - Tilt Cylinder 4641 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 25 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure 4641 psi - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 2.7 s - -
    Note All cycle times listed are with cylinder snubbing turned off. - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Total Cycle Time 11.5 s - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.8 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 4.8 s - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 40 gal/min - -
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow 25 gal/min - -

    Steering
    Maximum Working Pressure - Steering Pump 3190 psi - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.3 s - -
    Steering Articulation Angle - Each Direction 40 ° - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.4 turns - -
    Maximum Flow - Steering Pump 21.7 gal/min - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - -
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Transmission Type - Cat planetary power shift Cat planetary power shift
    Forward - 1 - 5 mile/h 5 mile/h
    Forward - 2 - 8 mile/h 8 mile/h
    Direct Drive - Forward 2 - 8 mile/h 8 mile/h
    Direct Drive - Forward 3 - 14 mile/h 14 mile/h
    Direct Drive - Forward 4 - 24 mile/h 24 mile/h
    Reverse - 1 - 5 mile/h 5 mile/h
    Reverse - 2 - 8 mile/h 8 mile/h
    Direct Drive - Reverse 2 - 9 mile/h 9 mile/h
    Direct Drive - Reverse 3 - 16 mile/h 16 mile/h
    Direct Drive - Reverse 4 - 25.4 mile/h 25.4 mile/h
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Reverse 1 - - Lock-up disabled

    Axles
    Rear Oscillating ±11 degrees; Locking differential (standard) Trunnion Trunnion
    Front Fixed; Locking differential (standard) Fixed Fixed
    Oscillation Angle - ±12.5° +/-12.5°
    Oscillation Angle - Chain Arrangement - ±8.5° -

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Operating Specifications
    Operating Weight - Standard - 97785 lb -
    Operating Weight - High Lift - 104005 lb -
    Rated Payload - Standard (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (Standard) - 14 ton (US) -
    Rated Payload - High Lift (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (High Lift) - 12.1 ton (US) -
    Bucket Capacity Range - 5-10,3 m³ (6,5-13,5 yd.³) 6.4-7.6 m3 (8.3-10 yd3)
    Cat Truck Match - Standard - 770/735/740/745 -
    Cat Truck Match - High Lift - 772/773 772/773/775
    Operating Weight - - 116858 lb
    Rated Payload - Quarry Face - - 12.5 ton (US)

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Load Sense EH - Load Sense
    Lift/Tilt System - Pump - 2 × 110 cc variable displacement -
    Maximum Flow at 2,165 rpm - 123 gal/min 159 gal/min
    Relief Valve Setting - Lift/Tilt - 4050 psi 4598 psi
    Lift Cylinder - Bore - 7.5 in -
    Lift Cylinder - Stroke - 45 in -
    Tilt Cylinder - Bore - 6.7 in -
    Tilt Cylinder - Stroke - 28.4 in 27 in
    Lift/Tilt System - - 2X x 145 cc Variable displacement piston
    Cylinders, Double Acting - Lift, Bore and Stroke - - 190 mm x 1216 mm (7.5 in x 48 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 170 mm x 722 mm (6.7 in x 28.4 in)
    Pilot System - - Variable displacement piston

    Hydraulic Cycle Times
    Rack Back - 4.5 s 3.8 s
    Raise - 9 s 7.5 s
    Dump - 3.5 s 3 s
    Lower - 5.2 s -
    Lower Float Down - 4.3 s 4.6 s
    Total Hydraulic Cycle Time - 21.3 s -
    Total Hydraulic Cycle Time - Empty Bucket - - 18.9 s

    Hydraulic System - Steering
    Steering System - Circuit - Load Sense Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement
    Maximum Flow at 1,400 rpm - 52 gal/min -
    Steering Cut Off Pressure - 4000 psi -
    Total Steering Angle - 70° 70°
    Maximum Flow - - 52 gal (US)
    Relief Valve Setting - Steering - - 4000 psi
    Steering Cycle Times - High Idle - - 3 s
    Steering Cycle Times - Low Idle - - 5.2 s

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		-

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		-

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.1 ft -
    Clearance at Maximum Lift - 10.1 ft -
    B-Pin Height - Maximum Lift - 16.1 ft -
    Maximum Overall Height - Bucket Raised - 22.4 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 36.6 ft -
    Front Axle Centerline to Bucket Tip - 13.8 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.4 ft -
    Clearance at Maximum Lift - 11.6 ft -
    B-Pin Height - Maximum Lift - 17.6 ft -
    Maximum Overall Height - Bucket Raised - 23.9 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 38 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach at Maximum Lift - 8 ft -
    Clearance at Maximum Lift - 10.7 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Maximum Overall Height, Bucket Raised - 20.9 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35 ft -
    Front Axle Centerline to Bucket Tip - 12.2 ft -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35.4 ft -
    Front Axle Centerline to Bucket Tip - 12.6 ft -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Front Axle Centerline to Bucket Tip - - 15.7 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 39.5 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Clearance at Maximum Lift - - 12 ft
    B-Pin Height - Maximum Lift - - 18.7 ft
    Maximum Overall Height - Bucket Raised - - 25 ft
    Reach - Maximum Lift - - 7.7 ft
    Note - - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
    Add a Similar Product: