Engine meets Tier 4 Final/Stage V emission standards.
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
-
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Maximum Gross Power - ISO 14396
121 HP
-
-
Rated Speed
-
2000
-
Peak Power Speed
-
1600
-
Engine Power - ISO 14396
-
449 HP
-
Gross Power - SAE J1995
-
456 HP
-
Net Power - SAE J1349
-
373 HP
-
Peak Torque - 1,200 rpm - SAE J1995
-
1778 ft·lbf
-
Torque Rise
-
16%
-
Weights
Operating Weight
21742 lb
-
-
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
6.4-7.6 m3 (8.3-10 yd3)
-
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
-
-
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
-
-
Sustainability
Recyclability
95%
96%
-
Service Refill Capacities
Transmission
0.8 gal (US)
20 gal (US)
-
Engine Crankcase
2.6 gal (US)
9 gal (US)
-
Axles - Rear
4.5 gal (US)
-
-
Hydraulic System - Including Tank
25.9 gal (US)
-
-
Cooling System
5.7 gal (US)
27 gal (US)
-
Fuel Tank
43.6 gal (US)
141 gal (US)
-
Hydraulic Tank
14.5 gal (US)
-
-
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
-
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
-
-
Axles - Front
4.5 gal (US)
-
-
Diesel Exhaust Fluid Tank
-
5.5 gal (US)
-
Differential - Final Drives - Front
-
49 gal (US)
-
Differential - Final Drives - Rear
-
45 gal (US)
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005
-
-
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
-
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
-
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
-
Note (4)
*The measurements were conducted with the cab doors and windows closed.
-
-
Loader Hydraulic System
Maximum Flow - Implement Pump
43.6 gal/min
-
-
Relief Pressure - Tilt Cylinder
4641 psi
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
25 gal/min
-
-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
4641 psi
-
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7 s
-
-
Note
All cycle times listed are with cylinder snubbing turned off.
-
-
Maximum Working Pressure - Implement Pump
4061 psi
-
-
Hydraulic Cycle Time - Total Cycle Time
11.5 s
-
-
Hydraulic Cycle Time - Rackback
2.2 s
-
-
Hydraulic Cycle Time - Dump, at Maximum Reach
1.8 s
-
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
4.8 s
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
40 gal/min
-
-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
25 gal/min
-
-
Steering
Maximum Working Pressure - Steering Pump
3190 psi
-
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.3 s
-
-
Steering Articulation Angle - Each Direction
40 °
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.4 turns
-
-
Maximum Flow - Steering Pump
21.7 gal/min
-
-
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Other tire choices are available. Contact your Cat dealer for details.
-
-
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
-
-
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
-
-
Operating Specifications
Operating Weight
-
116858 lb
-
Rated Payload - Quarry Face
-
12.5 ton (US)
-
Bucket Capacity Range
-
6.4-7.6 m3 (8.3-10 yd3)
-
Cat Truck Match - High Lift
-
772/773/775
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
EH - Load Sense
-
Lift/Tilt System
-
2X x 145 cc Variable displacement piston
-
Maximum Flow at 2,165 rpm
-
159 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4598 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
190 mm x 1216 mm (7.5 in x 48 in)
-
Cylinders, Double Acting - Tilt, Bore and Stroke
-
170 mm x 722 mm (6.7 in x 28.4 in)
-
Pilot System
-
Variable displacement piston
-
Tilt Cylinder - Stroke
-
27 in
-
Hydraulic Cycle Times
Rack Back
-
3.8 s
-
Raise
-
7.5 s
-
Dump
-
3 s
-
Lower Float Down
-
4.6 s
-
Total Hydraulic Cycle Time - Empty Bucket
-
18.9 s
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, load sensing
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow
-
52 gal (US)
-
Relief Valve Setting - Steering
-
4000 psi
-
Total Steering Angle
-
70°
-
Steering Cycle Times - High Idle
-
3 s
-
Steering Cycle Times - Low Idle
-
5.2 s
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Front Axle Centerline to Bucket Tip
-
15.7 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
39.5 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Clearance at Maximum Lift
-
12 ft
-
B-Pin Height - Maximum Lift
-
18.7 ft
-
Maximum Overall Height - Bucket Raised
-
25 ft
-
Reach - Maximum Lift
-
7.7 ft
-
Note
-
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.