CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    920 Compact Wheel Loader
    View Product
    988 GC Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 121 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 2200 r/min - -
    Rated Net Power - SAE J1349 120 HP - -
    Maximum Gross Power - ISO 14396 (metric) 122 HP - -
    Rated Net Power - ISO 9249 118 HP - -
    Maximum Gross Torque - SAE J1995 372 ft·lbf - -
    Maximum Gross Torque - ISO 14396 369 ft·lbf - -
    Maximum Net Torque - SAE J1349 366 ft·lbf - -
    Maximum Net Torque - ISO 9249 363 ft·lbf - -
    Displacement 220 in³ 927 in³ 4766 in³
    Bore 3.85 in 5.4 in 6.7 in
    Stroke 4.72 in 6.75 in 8.5 in
    Engine Model Cat C3.6 Cat® C15 Cat® 3516E
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 121 HP - -
    Rated Speed - 2000 -
    Peak Power Speed - 1600 -
    Engine Power - ISO 14396 - 449 HP 1847 HP
    Gross Power - SAE J1995 - 456 HP 1870 HP
    Net Power - SAE J1349 - 373 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 ft·lbf 8549 lb/ft
    Torque Rise - 16% 39%
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - 1696 HP
    Note (1) - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - The gross power advertised is with the fan at maximum speed.

    Weights
    Operating Weight 21742 lb - -

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) 6.4-7.6 m3 (8.3-10 yd3) -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% 96% -

    Service Refill Capacities
    Transmission 0.8 gal (US) 20 gal (US) -
    Engine Crankcase 2.6 gal (US) 9 gal (US) -
    Axles - Rear 4.5 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Cooling System 5.7 gal (US) 27 gal (US) -
    Fuel Tank 43.6 gal (US) 141 gal (US) -
    Hydraulic Tank 14.5 gal (US) - -
    Note DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Axles - Front 4.5 gal (US) - -
    Diesel Exhaust Fluid Tank - 5.5 gal (US) -
    Differential - Final Drives - Front - 49 gal (US) -
    Differential - Final Drives - Rear - 45 gal (US) -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -

    Loader Hydraulic System
    Maximum Flow - Implement Pump 43.6 gal/min - -
    Relief Pressure - Tilt Cylinder 4641 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 25 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure 4641 psi - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 2.7 s - -
    Note All cycle times listed are with cylinder snubbing turned off. - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Total Cycle Time 11.5 s - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.8 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 4.8 s - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 40 gal/min - -
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow 25 gal/min - -

    Steering
    Maximum Working Pressure - Steering Pump 3190 psi - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.3 s - -
    Steering Articulation Angle - Each Direction 40 ° - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.4 turns - -
    Maximum Flow - Steering Pump 21.7 gal/min - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - Travel speeds based on 58/85-57 tires.
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Transmission Type - Cat planetary power shift Cat Planetary Power Shift
    Forward - 1 - 5 mile/h 4.6 mile/h
    Forward - 2 - 8 mile/h 8 mile/h
    Reverse - 1 - 5 mile/h 5 mile/h
    Reverse - 2 - 8 mile/h 8.8 mile/h
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disables
    Direct Drive - Forward 2 - 8 mile/h 8.7 mile/h
    Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h
    Direct Drive - Forward 4 - 24 mile/h -
    Direct Drive - Reverse 1 - Lock-up disabled Lock-up disables
    Direct Drive - Reverse 2 - 9 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 16 mile/h 16.8 mile/h
    Direct Drive - Reverse 4 - 25.4 mile/h -
    Forward - 3 - - 13.6 mile/h
    Reverse - 3 - - 14.9 mile/h

    Axles
    Rear Oscillating ±11 degrees; Locking differential (standard) Trunnion Trunnion
    Front Fixed; Locking differential (standard) Fixed Fixed
    Oscillation Angle - +/-12.5° 9°

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Operating Specifications
    Operating Weight - 116858 lb -
    Rated Payload - Quarry Face - 12.5 ton (US) -
    Bucket Capacity Range - 6.4-7.6 m3 (8.3-10 yd3) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - High Lift - 772/773/775 789/793/794
    Operating Weight - Standard - - 543772 lb
    Operating Weight - High Lift - - 547675 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
    Cat Truck Match - Standard - - 785/789

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH - Load Sense Positive Flow Control
    Lift/Tilt System - 2X x 145 cc Variable displacement piston -
    Maximum Flow at 2,165 rpm - 159 gal/min -
    Relief Valve Setting - Lift/Tilt - 4598 psi 5004 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 190 mm x 1216 mm (7.5 in x 48 in) 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - 170 mm x 722 mm (6.7 in x 28.4 in) 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - Variable displacement piston Open Loop and Pressure Reducing
    Tilt Cylinder - Stroke - 27 in -
    Lift/Tilt System - Pump - - Variable Displacement Piston
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min

    Hydraulic Cycle Times
    Rack Back - 3.8 s 4.9 s
    Raise - 7.5 s 12.6 s
    Dump - 3 s 3.1 s
    Lower Float Down - 4.6 s 4.2 s
    Total Hydraulic Cycle Time - Empty Bucket - 18.9 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, Variable Displacement
    Maximum Flow - 52 gal (US) -
    Relief Valve Setting - Steering - 4000 psi -
    Total Steering Angle - 70° 80 degrees
    Steering Cycle Times - High Idle - 3 s 4.3 s
    Steering Cycle Times - Low Idle - 5.2 s 7.6 s

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Front Axle Centerline to Bucket Tip - 15.7 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 39.5 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Clearance at Maximum Lift - 12 ft -
    B-Pin Height - Maximum Lift - 18.7 ft -
    Maximum Overall Height - Bucket Raised - 25 ft -
    Reach - Maximum Lift - 7.7 ft -
    Note - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. -

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - 28.8 ft
    Clearance at Maximum Lift - - 19.8 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 21.9 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 39.3 ft
    Maximum Overall Length - - 64.6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees
    Rack Back Angle - Carry - - 47.7 degrees
    Rack Back Angle - Ground Level - - 39.7 degrees
    Reach - Maximum Lift - - 9.6 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - 31.6 ft
    Clearance at Maximum Lift - - 22.6 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 24.2 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 42.1 ft
    Maximum Overall Length - - 66.9 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees
    Rack Back Angle - Carry - - 53.5 degrees
    Rack Back Angle - Ground Level - - 45 degrees
    Reach - Maximum Lift - - 9.4 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft
    Add a Similar Product: