Engine meets Tier 4 Final/Stage V emission standards.
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
-
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Maximum Gross Power - ISO 14396
121 HP
-
-
Peak Power Speed
-
1600
-
Peak Power Speed - Gross - SAE J1995
-
456 HP
-
Engine Power - ISO 14396
-
449 HP
-
Net Power - SAE J1349
-
373 HP
-
Rated Speed
-
2000
-
Rated Speed - 2,000 rpm - EEC 80/1269
-
373 HP
-
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
-
378 HP
-
Rated Speed - 2,000 rpm - ISO 9249
-
373 HP
-
Rated Speed - 2,000 rpm - ISO 9249 (DIN)
-
378 HP
-
Peak Torque - 1,200 rpm - SAE J1995
-
1778 lb/ft
-
Torque Rise
-
16%
-
Weights
Operating Weight
21742 lb
-
-
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
-
-
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
-
-
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
-
-
Sustainability
Recyclability
95%
-
-
Service Refill Capacities
Transmission
0.8 gal (US)
20 gal (US)
-
Engine Crankcase
2.6 gal (US)
-
-
Axles - Rear
4.5 gal (US)
-
-
Hydraulic System - Including Tank
25.9 gal (US)
-
-
Cooling System
5.7 gal (US)
-
-
Fuel Tank
43.6 gal (US)
141 gal (US)
-
Hydraulic Tank
14.5 gal (US)
-
-
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
-
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
-
-
Axles - Front
4.5 gal (US)
-
-
Fuel Tank - Short Lift
-
127 gal (US)
-
Cooling Systems
-
26 gal (US)
-
Crankcase
-
9 gal (US)
-
Diesel Exhaust Fluid Tank
-
6 gal (US)
-
Axle Oil - Differentials and Final Drives - Front
-
49 gal (US)
-
Axle Oil - Differentials and Final Drives - Rear
-
45 gal (US)
-
Hydraulic System Factory Fill
-
87 gal (US)
-
Hydraulic System - Tank Only
-
34 gal (US)
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005
-
-
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
-
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
-
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
-
Note (4)
*The measurements were conducted with the cab doors and windows closed.
-
-
Loader Hydraulic System
Maximum Flow - Implement Pump
43.6 gal/min
-
-
Relief Pressure - Tilt Cylinder
4641 psi
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
25 gal/min
-
-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
4641 psi
-
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7 s
-
-
Note
All cycle times listed are with cylinder snubbing turned off.
-
-
Maximum Working Pressure - Implement Pump
4061 psi
-
-
Hydraulic Cycle Time - Total Cycle Time
11.5 s
-
-
Hydraulic Cycle Time - Rackback
2.2 s
-
-
Hydraulic Cycle Time - Dump, at Maximum Reach
1.8 s
-
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
4.8 s
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
40 gal/min
-
-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
25 gal/min
-
-
Steering
Maximum Working Pressure - Steering Pump
3190 psi
-
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.3 s
-
-
Steering Articulation Angle - Each Direction
40 °
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.4 turns
-
-
Maximum Flow - Steering Pump
21.7 gal/min
-
-
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Other tire choices are available. Contact your Cat dealer for details.
-
-
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
-
-
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
-
-
Operating Specifications
Operating Weight - Standard
-
97785 lb
-
Operating Weight - High Lift
-
104005 lb
-
Rated Payload - Standard (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (Standard)
-
14 ton (US)
-
Rated Payload - High Lift (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (High Lift)
-
12.1 ton (US)
-
Bucket Capacity Range
-
5-10,3 m³ (6,5-13,5 yd.³)
-
Cat Truck Match - Standard
-
770/735/740/745
-
Cat Truck Match - High Lift
-
772/773
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
Load Sense
-
Lift/Tilt System - Pump
-
2 × 110 cc variable displacement
-
Maximum Flow at 2,165 rpm
-
123 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4050 psi
-
Lift Cylinder - Bore
-
7.5 in
-
Lift Cylinder - Stroke
-
45 in
-
Tilt Cylinder - Bore
-
6.7 in
-
Tilt Cylinder - Stroke
-
28.4 in
-
Hydraulic Cycle Times
Rack Back
-
4.5 s
-
Raise
-
9 s
-
Dump
-
3.5 s
-
Lower
-
5.2 s
-
Lower Float Down
-
4.3 s
-
Total Hydraulic Cycle Time
-
21.3 s
-
Hydraulic System - Steering
Steering System - Circuit
-
Load Sense
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow at 1,400 rpm
-
52 gal/min
-
Steering Cut Off Pressure
-
4000 psi
-
Total Steering Angle
-
70°
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-
Sound Performance - Standard
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
112 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.1 ft
-
Clearance at Maximum Lift
-
10.1 ft
-
B-Pin Height - Maximum Lift
-
16.1 ft
-
Maximum Overall Height - Bucket Raised
-
22.4 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
36.6 ft
-
Front Axle Centerline to Bucket Tip
-
13.8 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.4 ft
-
Clearance at Maximum Lift
-
11.6 ft
-
B-Pin Height - Maximum Lift
-
17.6 ft
-
Maximum Overall Height - Bucket Raised
-
23.9 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
38 ft
-
Front Axle Centerline to Bucket Tip
-
15.3 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.