Compare Equipment Go Back
AD30 Underground Mining Truck |
|
|
|
Engine |
|||
---|---|---|---|
Engine Model | Cat® C15 | - | - |
Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | - | - |
Engine Power - VR Engine - ISO 14396:2002 | 401 HP | - | - |
Bore | 5.4 in | - | - |
Stroke | 6.8 in | - | - |
Displacement | 928 in³ | - | - |
Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | - | - |
Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | - | - |
Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | - | - |
Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
- | - |
Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | - | - |
Operating Specifications |
|||
Nominal Payload Capacity | 66139 lb | - | - |
Gross Machine Mass | 132300 lb | - | - |
Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | - | - |
Body Capacities |
|||
Body 1 | 14.8 yd³ | - | - |
Body 2 - Standard Body | 18.8 yd³ | - | - |
Body 3 | 22.9 yd³ | - | - |
Wide Body | 21.9 yd³ | - | - |
Ejector Body (1) | 19.9 yd³ | - | - |
Ejector Body (2) | 21.9 yd³ | - | - |
Note | Heaped SAE 2:1. | - | - |
Weight Distribution |
|||
Empty - Front Axle | 67.50% | - | - |
Empty - Rear Axle | 32.50% | - | - |
Loaded - Front Axle | 44.20% | - | - |
Loaded - Rear Axle | 55.80% | - | - |
Weights |
|||
Empty | 63647 lb | - | - |
Empty - Front Axle | 42944 lb | - | - |
Empty - Rear Axle | 20704 lb | - | - |
Loaded | 132277 lb | - | - |
Loaded - Front Axle | 58451 lb | - | - |
Loaded - Rear Axle | 73826 lb | - | - |
Body Hoist |
|||
Raise | 10.5 s | - | - |
Lower | 11.2 s | - | - |
Total Cycle Time | 21.7 s | - | - |
Turning Dimensions |
|||
Outside Clearance Radius | 337.4 in | - | - |
Inner Clearance Radius | 198 in | - | - |
Articulation Angle | 42.5 ° | - | - |
Frame Oscillation | 10 Degrees | - | - |
Transmission |
|||
Forward - 1 | 3.9 mile/h | - | - |
Forward - 2 | 7 mile/h | - | - |
Forward - 3 | 12.9 mile/h | - | - |
Forward - 4 | 22.8 mile/h | - | - |
Reverse - 1 | 4.4 mile/h | - | - |
Note | Maximum travel speeds with standard 26.5 × R25 tires. | - | - |
Service Refill Capacities |
|||
Engine Crankcase - With Filter | 9 gal (US) | - | - |
Transmission | 18 gal (US) | - | - |
Hydraulic Tank | 38 gal (US) | - | - |
Cooling System | 20 gal (US) | - | - |
Front Differential and Final Drives | 15 gal (US) | - | - |
Rear Differential and Final Drives | 15 gal (US) | - | - |
Fuel Tank | 108 gal (US) | - | - |
Tires |
|||
Tire Size | 26.5 × R25 | - | - |
Final Drives |
|||
Differential Ratio | 3.38:1 | - | - |
Final Drive Ratio | 4.76:1 | - | - |
Total Reduction Ratio | 16.13:1 | - | - |
Note | Fully floating axles. | - | - |
Standards |
|||
Standards | ROPS/FOPS Certified Cab | - | - |