Compare Equipment Go Back

AD30 Underground Mining Truck
AD45 Underground Articulated Truck

Engine

Engine Model Cat® C15 Cat® C18 -
Engine Power - Tier 3 Engine - ISO 14396:2002 401 HP 581 HP -
Engine Power - VR Engine - ISO 14396:2002 401 HP 581 HP -
Bore 5.4 in 5.7 in -
Stroke 6.8 in 7.2 in -
Displacement 928 in³ 1104.53 in³ -
Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard. -
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
Note (3) Engine derate will commence at an altitude of 2743 m (8,999 ft). Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. -
Note (4) Optional Ventilation Reduction package available.
Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.
Optional Ventilation Reduction Package available. -
Note (5) Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. -
Engine Power - EU Stage V Engine - ISO 14396:2002 - 598 HP -
Note (6) - Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. -
Note (7) - *<5 % -

Operating Specifications

Nominal Payload Capacity 66139 lb 99208 lb -
Gross Machine Mass 132300 lb 196765 lb -
Body Capacities 11.3-17.5 m³ (14.8-22.9 yd³) 18.0-25.1 m³ (23.5-32.8 yd³) -
Shipping Mass (Stage V Engine Model) - 96225 lb -
Shipping Mass (Other Engine Models) - 94415 lb -

Body Capacities

Body 1 14.8 yd³ - -
Body 2 - Standard Body 18.8 yd³ - -
Body 3 22.9 yd³ - -
Wide Body 21.9 yd³ - -
Ejector Body (1) 19.9 yd³ - -
Ejector Body (2) 21.9 yd³ - -
Note Heaped SAE 2:1. Heaped SAE 2:1. -
Dump Body - 1 - 23.6 yd³ -
Dump Body - 2 - Standard - 27.9 yd³ -
Dump Body - 3 - 32.8 yd³ -
Ejector Body - 29.9 yd³ -

Weight Distribution

Empty - Front Axle 67.50% - -
Empty - Rear Axle 32.50% - -
Loaded - Front Axle 44.20% - -
Loaded - Rear Axle 55.80% - -

Weights

Empty 63647 lb - -
Empty - Front Axle 42944 lb - -
Empty - Rear Axle 20704 lb - -
Loaded 132277 lb - -
Loaded - Front Axle 58451 lb - -
Loaded - Rear Axle 73826 lb - -

Body Hoist

Raise 10.5 s - -
Lower 11.2 s - -
Total Cycle Time 21.7 s - -

Turning Dimensions

Outside Clearance Radius 337.4 in - -
Inner Clearance Radius 198 in - -
Articulation Angle 42.5 ° 42.5° -
Frame Oscillation 10 Degrees 10° -
Outside Clearance Radius* - 371 in -
Inside Clearance Radius* - 209 in -
Note - *Clearance dimensions are for reference only. -

Transmission

Forward - 1 3.9 mile/h 4.4 mile/h -
Forward - 2 7 mile/h 5.9 mile/h -
Forward - 3 12.9 mile/h 8 mile/h -
Forward - 4 22.8 mile/h 10.8 mile/h -
Reverse - 1 4.4 mile/h 4.2 mile/h -
Note Maximum travel speeds with standard 26.5 × R25 tires. Maximum travel speeds with standard 29.5 × R29 tires. -
Forward - 5 - 14.6 mile/h -
Forward - 6 - 19.7 mile/h -
Forward - 7 - 26.4 mile/h -
Reverse - 2 - 5.6 mile/h -

Service Refill Capacities

Engine Crankcase - With Filter 9 gal (US) 16.9 gal (US) -
Transmission 18 gal (US) 15.9 gal (US) -
Hydraulic Tank 38 gal (US) 70.3 gal (US) -
Cooling System 20 gal (US) 22.5 gal (US) -
Front Differential and Final Drives 15 gal (US) 20.3 gal (US) -
Rear Differential and Final Drives 15 gal (US) 21.9 gal (US) -
Fuel Tank 108 gal (US) 201.8 gal (US) -

Tires

Tire Size 26.5 × R25 29.5 × R29 -

Final Drives

Differential Ratio 3.38:1 3.46:1 -
Final Drive Ratio 4.76:1 5.65:1 -
Total Reduction Ratio 16.13:1 19.55:1 -
Note Fully floating axles. - -

Standards

Standards ROPS/FOPS Certified Cab ROPS/FOPS Certified Cab -

Weights (Stage V Engine Model)

Operating Mass - 91285 lb -
Operating Mass - Front Axle - 64565 lb -
Operating Mass - Rear Axle - 26720 lb -
Operating Mass + Rated Payload - 190495 lb -
Operating Mass + Rated Payload - Front Axle - 89235 lb -
Operating Mass + Rated Payload - Rear Axle - 101260 lb -

Weights (Other Engine Models)

Operating Mass - 88320 lb -
Operating Mass - Front Axle - 61225 lb -
Operating Mass - Rear Axle - 27095 lb -
Operating Mass + Rated Payload - 187530 lb -
Operating Mass + Rated Payload - Front Axle - 85355 lb -
Operating Mass + Rated Payload - Rear Axle - 102175 lb -

Weight Distribution (Stage V Engine Model)

Empty - Front Axle - 70.7% -
Empty - Rear Axle - 29.3% -
Loaded - Front Axle - 46.8% -
Loaded - Rear Axle - 53.2% -

Weight Distribution (Other Engine Models)

Empty - Front Axle - 69.3% -
Empty - Rear Axle - 30.7% -
Loaded - Front Axle - 45.5% -
Loaded - Rear Axle - 54.5% -

Body Hoist (Stage V Engine Model)

Raise - 15 Seconds -
Lower - 21 Seconds -
Total Cycle Time - 36 Seconds -

Body Hoist (Other Engine Models)

Raise - 14 Seconds -
Lower - 21 Seconds -
Total Cycle Time - 35 Seconds -
Add a Similar Product:
  • AD63 Underground Articulated Truck Add
  • R3000H Underground Mining Loader Add
  • R2900G Underground Mining Loader Add
  • R1600H Underground Mining Loader Add
  • R1700 Underground Mining Loader Add
  • R1300G Underground Mining Loader Add