AD30 Underground Mining Truck

Product description

The AD30 underground mining truck is designed for high production, low cost-per-ton hauling in smaller underground mining applications. Rugged construction and easy maintenance guarantee long life with low operating costs.
Engineered for performance, designed for comfort, built to last.

Engine
  • Engine Model - Cat® C15
  • Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Engine Power - ISO 14396:2002 - 401HP
  • Emissions - Ventilation Reduction (VR) Engine - Engine Power - ISO 14396:2002 - 401HP
  • Bore - 5.4in
  • Stroke - 6.8in
  • Displacement - 928in³
  • Note (3) - Engine derate will commence at an altitude of 2743 m (8,999 ft).
  • Note (2) - All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
  • Rated Power - 1800r/min
  • Note (1) - Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
  • Note (4) - Optional Ventilation Reduction package available.
    Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.
  • Note (5) - Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Operating Specifications
  • Nominal Payload Capacity - 66139lb
  • Gross Machine Mass - 132300lb
  • Body Capacities - 11.3-17.5 m³ (14.8-22.9 yd³)
Body Capacities
  • Body 1 - 14.8yd³
  • Body 2 - Standard Body - 18.8yd³
  • Body 3 - 22.9yd³
  • Wide Body - 21.9yd³
  • Ejector Body (1) - 19.9yd³
  • Ejector Body (2) - 21.9yd³
  • Note - Heaped SAE 2:1.
Body Hoist
  • Raise - 10.5s
  • Lower - 11.2s
  • Total Cycle Time - 21.7s
Turning Dimensions
  • Outside Clearance Radius - 337.4in
  • Inner Clearance Radius - 198in
  • Articulation Angle - 42.5°
  • Frame Oscillation - 10 Degrees
Transmission
  • Forward - 1 - 3.9mile/h
  • Forward - 2 - 7mile/h
  • Forward - 3 - 12.9mile/h
  • Forward - 4 - 22.8mile/h
  • Reverse - 1 - 4.4mile/h
  • Note - Maximum travel speeds with standard 26.5 × R25 tires.
Service Refill Capacities
  • Engine Crankcase - With Filter - 9gal (US)
  • Transmission - 18gal (US)
  • Hydraulic Tank - 38gal (US)
  • Cooling System - 20gal (US)
  • Front Differential and Final Drives - 15gal (US)
  • Rear Differential and Final Drives - 15gal (US)
  • Fuel Tank - 108gal (US)
Tires
  • Tire Size - 26.5 × R25
Final Drives
  • Differential Ratio - 3.38:1
  • Final Drive Ratio - 4.76:1
  • Total Reduction Ratio - 16.13:1
  • Note - Fully floating axles.
Weight Distribution
  • Empty - Rear Axle - 32.50%
  • Loaded - Front Axle - 44.20%
  • Loaded - Rear Axle - 55.80%
  • Empty - Front Axle - 67.50%
Standards
  • Standards - ROPS/FOPS Certified Cab
Weights (Other Engine Models)
  • Operating Mass - Front Axle - 42944lb
  • Operating Mass + Rated Payload - 132277lb
  • Operating Mass + Rated Payload - Rear Axle - 73826lb
  • Operating Mass - 63647lb
  • Operating Mass + Rated Payload - Front Axle - 58451lb
  • Operating Mass - Rear Axle - 20704lb
Standard Equipment:
  • Tires, Rims, And Wheels
    • Tires must be selected from the Mandatory Attachments section. Choose from below:
      – Tire, 26.5 × 25 VSNT Bridgestone
      – Tire, 26.5 × 25 VSDL Bridgestone
    • Rims (set of four) – five pieces, tubeless
  • Electrical
    • 12V power supply in cab
    • Alarm, reversing
    • Alternator, 95 amp
    • Battery disconnect switch, ground level
    • Circuit breaker, 80-amp
    • Corrosive protection spray
    • Diagnostic connector
    • Disconnect switch, two post, ground level
    • Lights:
      – Headlights with dimmer switch
      – Brake and tail lights
      – Reversing lights, automatic when reverse gear selected
      – Work light, rear, cab mounted
    • Low maintenance batteries
    • Receptacle group, auxiliary start
    • Shutdown switch, ground level
    • Starting and charging system
  • Operator Environment
    • Cab, ROPS/FOPS certified
    • Open operator station ROPS/FOPS structure
    • Caterpillar Electronic Monitoring System (CEMS), dash instrument panels
    • Operator Presence System
    • Automatic Brake Application (ABA)
    • Electric horns
    • Gauges:
      – Engine coolant temperature
      – Transmission coolant temperature
      – Hydraulic oil temperature
      – Fuel level
      – Speedometer
      – Tachometer
    • Indicator lights:
      – Alert warning light
      – Body up position warning
      – High beam
      – Residual brake pressure warning
      – Retarder application
      – Turn signal
    • Low hydraulic level warning
    • Mirrors, rear view
    • Seat, suspension operator seat with retractable seat belt
    • Seat, trainer/passenger with seat belt
    • Steering wheel, tilt/telescopic
  • Power Train
    • Axle, arrangement:
      – Standard width, front – rear
    • Brake retarder control, automatic
    • Brakes:
      – All wheel disc
      – Oil cooled
      – Multiple-disc (SAFR)
    • Control throttle shifting
    • Electric fuel priming pump
    • Engine:
      – Cat C15 six cylinder diesel engine
      – Air-to-air aftercooler (ATAAC)
    • Exhaust, turbo compartment shielding
    • Four wheel drive
    • Gear blockout with tray up, programmable
    • Ground speed limiting, programmable
    • Long life coolant
    • Parking brakes, four wheels
    • Precleaner, engine air intake
    • Radiator cap manual release
    • Radiator, cross flow
    • Transmission, automatic planetary power shift (4F/1R)
    • Torque converter with automatic lockup
  • Other Standard Equipment
    • Adapters, oil sample
    • Alarm, tray up
    • Body dump and ejector:
      – Dump, (14.4 m3/18.8 yd3)
    • Cap, radiator, manual release
    • Catalytic exhaust purifier/muffler group
    • Centralized lubrication points
    • Fenders:
      – Front, rear flaps
    • Firewall
    • Fuel system manual shut off tap
    • Front rubber bumpers
    • Handholds (access on/off top deck)
    • Handrails
    • Hitch, articulated and oscillated
    • Lifting lugs, frame
    • Lubrication system:
      – Centralized, dump body
    • Operation and Maintenance Manual – English and other applicable local languages to select
    • Scheduled Oil Sampling (S·O·SSM) port:
      – Coolant
      – Engine oil
      – Hydraulic oil
      – Transmission oil
    • Spill guard, front, for body
    • Swing out radiator grill
    • Tow pin, front and rear
Optional Equipment:
  • Power Train
    • Axle, arrangement:
      – Wide body, front – rear
    • Brake pressure gauges
    • Engine options:
      – Engine, Ventilation Reduction (VR)
      – Equivalent to Tier 3
    • After treatment options (for use with VR engine only) Diesel Particulate Filter (DPF) (flow through) filter
    • Fast Fill System:
      – Coolant
      – Engine oil
      – Fuel (dual tanks)
      – Hydraulic oil
      – Transmission oil
    • Park Brake Switch Engagement – Push to Apply/Pull to Apply
    • Secondary steering system
  • Electrical
    • Battery shutdown:
      – Ground Level Isolation, In Cab Isolation Switch
      – Ground Level Isolation, Engine Shutdown Switch
      – Ground Level Isolation, In Cab Isolation, Engine Shutdown Switch
    • Lights:
      – Headlights with dimmer switch, LED
      – Reversing lights, automatic when reverse gear selected, LED
      – Work light, rear, cab mounted, LED
  • Operator Environment
    • Operator’s station ROPS/FOPS enclosed:
      – Air conditioning
      – Cab pressurizer and filter
      – Dome light
      – Heater
      – Radio ready compartment for radio and speakers
      – Sun visor
      – Window, sliding cab door
    • Seat:
      – Suspension seat Cat Comfort TLV2, vinyl
      – Suspension seat tee, mechanical
    • Seat cover:
      – Tee and Cat Comfort TLV2
      – Seat cover, companion
  • Technology
    • Vital Information Management System (VIMS) Gen 3
    • Payload:
      – Truck Payload Measurement System (TPMS)
      – Remote display for TPMS
  • Tires, Rims, And Wheels
    • Rim identification numbering
    • Spare rim, tubeless
  • Other Optional Equipment
    • Body dump and ejector:
      – Dump, (11.3 m3/14.8 yd3)
      – Dump, (16.8 m3/21.9 yd3) (wide body configuration)
      – Dump, (17.5 m3/22.9 yd3)
      – Ejector, (15.2 m3/19.9 yd3)
      – Ejector, (16.8 m3/21.9 yd3)
    • Body liners, impact and/or wear
    • Camera – color rear facing
    • Cover, anti vandalism for shipping
    • Fenders:
      – Wide body, front, rear flaps
    • Fire suppression system:
      – Ansul, dry powder
      – Foam, water based
    • Fluids:
      – Arctic fuel
      – Arctic coolant
    • Lubrication system:
      – Automatic, dump or ejector body
      – Centralized, ejector body
    • Mine transfer
    • Reflective tapes
    • Service tools
Compare Products