Compare Equipment Go Back
 AD30 Underground Mining Truck |
 AD63 Underground Articulated Truck |
|
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C15 | Cat® C27 | - |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | - | - |
| Engine Power - VR Engine - ISO 14396:2002 | 401 HP | - | - |
| Bore | 5.4 in | 5.4 in | - |
| Stroke | 6.8 in | 6 in | - |
| Displacement | 928 in³ | 1650 in² | - |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. | - |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | - |
| Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications | - |
| Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
- | - |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | - | - |
| Engine Power - EU Stage V Engine - ISO 14396:2002 | - | 795 HP | - |
Operating Specifications |
|||
| Nominal Payload Capacity | 66139 lb | 138891 lb | - |
| Gross Machine Mass | 132300 lb | - | - |
| Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | 26.9-38.3 m³ (35.2-50.1 yd³) | - |
| Gross Machine Operating Mass | - | 262218 lb | - |
Body Capacities |
|||
| Body 1 | 14.8 yd³ | - | - |
| Body 2 - Standard Body | 18.8 yd³ | - | - |
| Body 3 | 22.9 yd³ | - | - |
| Wide Body | 21.9 yd³ | - | - |
| Ejector Body (1) | 19.9 yd³ | - | - |
| Ejector Body (2) | 21.9 yd³ | - | - |
| Note | Heaped SAE 2:1. | Heaped SAE 2:1. | - |
| Dump Body - 1 - Standard | - | 35.2 yd³ | - |
| Dump Body - 2 | - | 42.6 yd³ | - |
| Dump Body - 3 | - | 44.2 yd³ | - |
| Dump Body - 4 | - | 47.9 yd³ | - |
| Dump Body - 5 (Light Material) | - | 50.1 yd³ | - |
Weight Distribution |
|||
| Empty - Front Axle | 67.50% | 70.7% | - |
| Empty - Rear Axle | 32.50% | 29.3% | - |
| Loaded - Front Axle | 44.20% | 49.8% | - |
| Loaded - Rear Axle | 55.80% | 50.2% | - |
Weights |
|||
| Empty | 63647 lb | 115577 lb | - |
| Empty - Front Axle | 42944 lb | 81716 lb | - |
| Empty - Rear Axle | 20704 lb | 33861 lb | - |
| Loaded | 132277 lb | 254468 lb | - |
| Loaded - Front Axle | 58451 lb | 126669 lb | - |
| Loaded - Rear Axle | 73826 lb | 127800 lb | - |
Body Hoist |
|||
| Raise | 10.5 s | 13 s | - |
| Lower | 11.2 s | 24 s | - |
| Total Cycle Time | 21.7 s | 37 s | - |
Turning Dimensions |
|||
| Outside Clearance Radius | 337.4 in | 393.9 in | - |
| Inner Clearance Radius | 198 in | - | - |
| Articulation Angle | 42.5 ° | 42.5 ° | - |
| Frame Oscillation | 10 Degrees | 10° | - |
| Inside Turn Radius | - | 218.1 in | - |
Transmission |
|||
| Forward - 1 | 3.9 mile/h | 4.1 mile/h | - |
| Forward - 2 | 7 mile/h | 5.7 mile/h | - |
| Forward - 3 | 12.9 mile/h | 7.7 mile/h | - |
| Forward - 4 | 22.8 mile/h | 10.3 mile/h | - |
| Reverse - 1 | 4.4 mile/h | 5.3 mile/h | - |
| Note | Maximum travel speeds with standard 26.5 × R25 tires. | Maximum travel speeds with standard 35 × 65 R33 tires. | - |
| Forward - 5 | - | 14 mile/h | - |
| Forward - 6 | - | 18.9 mile/h | - |
| Forward - 7 | - | 25.5 mile/h | - |
Service Refill Capacities |
|||
| Engine Crankcase - With Filter | 9 gal (US) | 25 gal (US) | - |
| Transmission | 18 gal (US) | 14 gal (US) | - |
| Hydraulic Tank | 38 gal (US) | 100.6 gal (US) | - |
| Cooling System | 20 gal (US) | 39.6 gal (US) | - |
| Front Differential and Final Drives | 15 gal (US) | 36.5 gal (US) | - |
| Rear Differential and Final Drives | 15 gal (US) | 36.5 gal (US) | - |
| Fuel Tank | 108 gal (US) | 237.7 gal (US) | - |
Tires |
|||
| Tire Size | 26.5 × R25 | 35 × 65 R33 | - |
Final Drives |
|||
| Differential Ratio | 3.38:1 | 3.46:1 | - |
| Final Drive Ratio | 4.76:1 | 5.5:1 | - |
| Total Reduction Ratio | 16.13:1 | 19.04:1 | - |
| Note | Fully floating axles. | - | - |
Standards |
|||
| Standards | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab | - |
