Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
-
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
-
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
-
Weights
Operating Weight
154888 lb
-
-
Shipping Weight
111739 lb
-
-
Note (1)
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
-
Note (2)
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
-
-
Undercarriage
Shoe Type
Extreme Service (ES)
-
-
Width - Shoe
24 in
-
-
Shoes/Side
44
-
-
Grouser Height
3.7 in
-
-
Pitch
10.2 in
-
-
Ground Clearance
28.5 in
-
-
Track Gauge
100.4 in
-
-
Length - Track on Ground
152.8 in
-
-
Ground Contact Area
7347 in²
-
-
Track Rollers/Side
8
-
-
Number of Carrier Rollers
1 per side (optional)
-
-
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
-
-
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
-
-
Sound
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
-
-
Note
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
-
-
Sound (1)
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
-
-
Note (1)
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
-
-
Note (2)
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
-
-
Note (3)
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
-
-
Transmission
1.0 Forward
2.5 mile/h
-
-
1.5 Forward
3.4 mile/h
-
-
2.0 Forward
4.5 mile/h
-
-
2.5 Forward
6 mile/h
-
-
3.0 Forward
7.8 mile/h
-
-
1.0 Reverse
3.2 mile/h
-
-
1.5 Reverse
4.2 mile/h
-
-
2.0 Reverse
5.6 mile/h
-
-
2.5 Reverse
7.5 mile/h
-
-
3.0 Reverse
9.8 mile/h
-
-
Transmission Clutch Diameter
17 in
-
-
Type
Planetary powershift
-
-
Blades
10SU ABR - Capacity (SAE J1265)
24.2 yd³
-
-
10SU ABR - Width (over end bits)
194.5 in
-
-
10SU ABR - Height
83.5 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Nominal
25.23 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.08 in³
-
-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.14 in
-
-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.86 in
-
-
10SU ABR - Ground Clearance - Maximum Tilt LH
56.3 in
-
-
10SU ABR - Ground Clearance - Maximum Tilt RH
56.3 in
-
-
10U ABR - Capacity (SAE J1265)
28.7 yd³
-
-
10U ABR - Width (over end bits)
207.1 in
-
-
10U ABR - Height
83.5 in
-
-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in
-
-
10U ABR - Digging Depth - Blade Pitch: Nominal
60 in
-
-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.1 in
-
-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.1 in
-
-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.9 in
-
-
10U ABR - Ground Clearance - Maximum Tilt LH
60.8 in
-
-
10U ABR - Ground Clearance - Maximum Tilt RH
60.8 in
-
-
10U ABR - Weights - Blade Weight*
23585 lb
-
-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
154888 lb
-
-
Note (1)
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
-
-
Note (2)
*Does not include hydraulic controls but includes blade cylinders, pusharms.
-
-
Note (3)
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
49233 lbf
-
-
Maximum penetration depth (standard tip)
59.2 in
-
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
36 in
-
-
Weight
14209 lb
-
-
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
53055 lbf
-
-
Maximum penetration depth (standard tip)
78.3 in
-
-
Weight
14548 lb
-
-
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
Cat® C27
-
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
603 hp
-
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
722 hp
-
-
Engine Power - Gross SAE J1995* - Forward
631 hp
-
-
Engine Power - Gross SAE J1995* - Reverse
766 hp
-
-
Engine Power - ISO 14396* - Forward
622 hp
-
-
Engine Power - ISO 14396* - Reverse
756 hp
-
-
Displacement
1648 in³
-
-
Bore
5.4 in
-
-
Stroke
6 in
-
-
Emissions
U.S. EPA Tier 2 Equivalent
-
-
Note (1)
*Excludes all fan losses.
-
-
Note (2)
All Engine ratings apply at 1,800 rpm.
-
-
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
-
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
-
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
-
Fuel Tank Capacities
Fuel Tank - Usable Volume
323.3 gal (US)
-
-
Fuel Tank - Total Volume
335.2 gal (US)
-
-
Hydraulic Controls
Pump Type
Variable displacement piston
-
-
Pump Output - Implement
112 gal/min
-
-
Note (1)
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
-
-
Fan Pump
21.7 gal/min
-
-
Note (2)
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
-
-
Tilt Cylinder Flow - Rod End Flow
112 gal/min
-
-
Tilt Cylinder Flow - Head End Flow
63.4 gal/min
-
-
Lift Cylinder Relief Valve Setting
4061.1 psi
-
-
Tilt Cylinder Relief Valve Setting
3872.5 psi
-
-
Ripper - Lift - Relief Valve Setting
4061.1 psi
-
-
Ripper - Pitch - Relief Valve Setting
4061.1 psi
-
-
Tank Capacity
32.2 gal (US)
-
-
Cylinder Sizing - Blade Lift - Bore
5.5 in
-
-
Cylinder Sizing - Blade Tilt - Bore
8.3 in
-
-
Cylinder Sizing - Ripper Shank Lift - Bore
8.3 in
-
-
Cylinder Sizing - Ripper Shank Angle - Bore
7.1 in
-
-
Cylinder Sizing - Blade Lift - Stroke
65.1 in
-
-
Cylinder Sizing - Blade Tilt - Stroke
9.5 in
-
-
Cylinder Sizing - Ripper Shank Lift - Stroke
21.1 in
-
-
Cylinder Sizing - Ripper Shank Angle - Stroke
26 in
-
-
Note (3)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
-
-
Dimensions (Approximate)
Ground Clearance*
28.5 in
-
-
Track Gauge
100.4 in
-
-
Width - Without Trunnions - 610 mm/24 in ES
130.4 in
-
-
Width - Over Trunnions
148 in
-
-
Height - FOPS Cab*
162.8 in
-
-
Height - Top of Stack*
171.5 in
-
-
Height - ROPS/Canopy*
173.5 in
-
-
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
