Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
-
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
955 HP
-
Weights
Operating Weight
154888 lb
229800 lb
-
Shipping Weight
111739 lb
-
-
Note (1)
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
-
Note (2)
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
-
Operating Weight - Carrydozer
-
250665 lb
-
Undercarriage
Shoe Type
Extreme Service (ES)
Extreme Service
-
Width - Shoe
24 in
28 in
-
Shoes/Side
44
41
-
Grouser Height
3.7 in
4 in
-
Pitch
10.2 in
12.5 in
-
Ground Clearance
28.5 in
-
-
Track Gauge
100.4 in
114 in
-
Length - Track on Ground
152.8 in
175 in
-
Ground Contact Area
7347 in²
9781 in²
-
Track Rollers/Side
8
8
-
Number of Carrier Rollers
1 per side (optional)
1 per side (optional)
-
Width - Shoe - CD
-
36 in
-
Ground Clearance*
-
30.6 in
-
Ground Contact Area - CD
-
12605 in²
-
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
-
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
-
Sound
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
-
-
Note
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
-
-
Sound (1)
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
-
Note (1)
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
-
-
Note (2)
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
-
-
Note (3)
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
-
-
Sound (2)
-
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
-
-
Note (1)
-
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
-
Transmission
1.0 Forward
2.5 mile/h
2.5 mile/h
-
1.5 Forward
3.4 mile/h
-
-
2.0 Forward
4.5 mile/h
4.4 mile/h
-
2.5 Forward
6 mile/h
-
-
3.0 Forward
7.8 mile/h
7.6 mile/h
-
1.0 Reverse
3.2 mile/h
3 mile/h
-
1.5 Reverse
4.2 mile/h
-
-
2.0 Reverse
5.6 mile/h
5.3 mile/h
-
2.5 Reverse
7.5 mile/h
-
-
3.0 Reverse
9.8 mile/h
9.1 mile/h
-
Transmission Clutch Diameter
17 in
-
-
Type
Planetary powershift
-
-
Drawbar Pull - 3 Forward
-
46250 ft·lbf
-
Drawbar Pull - 1 Forward
-
148200 ft·lbf
-
Drawbar Pull - 2 Forward
-
82300 ft·lbf
-
Blades
10SU ABR - Capacity (SAE J1265)
24.2 yd³
-
-
10SU ABR - Width (over end bits)
194.5 in
-
-
10SU ABR - Height
83.5 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Nominal
25.23 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.08 in³
-
-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.14 in
-
-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.86 in
-
-
10SU ABR - Ground Clearance - Maximum Tilt LH
56.3 in
-
-
10SU ABR - Ground Clearance - Maximum Tilt RH
56.3 in
-
-
10U ABR - Capacity (SAE J1265)
28.7 yd³
-
-
10U ABR - Width (over end bits)
207.1 in
-
-
10U ABR - Height
83.5 in
-
-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in
-
-
10U ABR - Digging Depth - Blade Pitch: Nominal
60 in
-
-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.1 in
-
-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.1 in
-
-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.9 in
-
-
10U ABR - Ground Clearance - Maximum Tilt LH
60.8 in
-
-
10U ABR - Ground Clearance - Maximum Tilt RH
60.8 in
-
-
10U ABR - Weights - Blade Weight*
23585 lb
-
-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
154888 lb
-
-
Note (1)
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
-
-
Note (2)
*Does not include hydraulic controls but includes blade cylinders, pusharms.
-
-
Note (3)
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Reclamation Universal - Width with blade (over end bits)
-
251.8 in
-
Carry Dozer - Blade capacity (SAE J1265)
-
57 yd³
-
Carry Dozer - Width with blade (over end bits)
-
263.9 in
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
49233 lbf
66000 lb
-
Maximum penetration depth (standard tip)
59.2 in
63.5 in
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
36 in
-
-
Weight
14209 lb
-
-
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
-
Pryout Force
-
148510 lb
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
53055 lbf
66110 lb
-
Maximum penetration depth (standard tip)
78.3 in
85.5 in
-
Weight
14548 lb
-
-
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
-
Pryout Force
-
148510 lb
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
Cat® C27
Cat® C32
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
603 HP
-
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
722 HP
-
-
Engine Power - Gross SAE J1995* - Forward
631 HP
-
-
Engine Power - Gross SAE J1995* - Reverse
766 HP
-
-
Engine Power - ISO 14396* - Forward
622 HP
-
-
Engine Power - ISO 14396* - Reverse
756 HP
-
-
Displacement
1648 in³
1959 in³
-
Bore
5.4 in
-
-
Stroke
6 in
-
-
Emissions
U.S. EPA Tier 2 Equivalent
-
-
Note (1)
*Excludes all fan losses.
*Excludes all fan losses.
-
Note (2)
All Engine ratings apply at 1,800 rpm.
Engine ratings apply at 1,800 rpm.
-
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
-
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
957 HP
-
Fuel Tank Capacities
Fuel Tank - Usable Volume
323.3 gal (US)
475 gal (US)
-
Fuel Tank - Total Volume
335.2 gal (US)
500 gal (US)
-
Hydraulic Controls
Pump Type
Variable displacement piston
Variable displacement piston pump
-
Pump Output - Implement
112 gal/min
-
-
Note (1)
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
-
-
Fan Pump
21.7 gal/min
-
-
Note (2)
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
-
-
Tilt Cylinder Flow - Rod End Flow
112 gal/min
-
-
Tilt Cylinder Flow - Head End Flow
63.4 gal/min
-
-
Lift Cylinder Relief Valve Setting
4061.1 psi
-
-
Tilt Cylinder Relief Valve Setting
3872.5 psi
-
-
Ripper - Lift - Relief Valve Setting
4061.1 psi
-
-
Ripper - Pitch - Relief Valve Setting
4061.1 psi
-
-
Tank Capacity
32.2 gal (US)
-
-
Cylinder Sizing - Blade Lift - Bore
5.5 in
-
-
Cylinder Sizing - Blade Tilt - Bore
8.3 in
-
-
Cylinder Sizing - Ripper Shank Lift - Bore
8.3 in
-
-
Cylinder Sizing - Ripper Shank Angle - Bore
7.1 in
-
-
Cylinder Sizing - Blade Lift - Stroke
65.1 in
-
-
Cylinder Sizing - Blade Tilt - Stroke
9.5 in
-
-
Cylinder Sizing - Ripper Shank Lift - Stroke
21.1 in
-
-
Cylinder Sizing - Ripper Shank Angle - Stroke
26 in
-
-
Note (3)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
-
-
Combined Pump Output - Implement
-
177 gal/min
-
Dimensions (Approximate)
Ground Clearance*
28.5 in
-
-
Track Gauge
100.4 in
-
-
Width - Without Trunnions - 610 mm/24 in ES
130.4 in
-
-
Width - Over Trunnions
148 in
-
-
Height - FOPS Cab*
162.8 in
-
-
Height - Top of Stack*
171.5 in
-
-
Height - ROPS/Canopy*
173.5 in
-
-
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
-
-
Length - Track on Ground
152.8 in
-
-
Overall Length - Basic Tractor
209.6 in
-
-
Length - With SU-Blade
292 in
-
-
Length - With U-Blade
305.1 in
-
-
Length - With Single-Shank Ripper
278.8 in
-
-
Length - With Multi-Shank Ripper
285.1 in
-
-
Overall Length - SU-Blade/SS Ripper
360.6 in
-
-
FLUID CAPACITIES
Cooling System Refill – Tier 4 Final Engine
46.2 gal (US)
-
-
Engine Crankcase Sump
27.2 gal (US)
-
-
Power Train - Total Volume
81.4 gal (US)
-
-
Power Train - Refill Volume
74.8 gal (US)
-
-
Final Drives (each)
12.2 gal (US)
-
-
Track Roller Frames (each)
16.9 gal (US)
-
-
Pivot Shaft Oil
9.5 gal (US)
-
-
Hydraulic System Tank
32.2 gal (US)
-
-
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width
-
131.1 in
-
Maximum Penetration Force - Shank Vertical
-
77350 lb
-
Maximum Penetration - Standard Tip
-
43.3 in
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
-
145640 lb
-
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)
-
149.8 in
-
Length with SU-Blade** - No rear attachment
-
345.1 in
-
Overall Length SU-Blade and SS Ripper**
-
421.7 in
-
Service Refill Capacities
Cooling System
-
46.8 gal (US)
-
Cooling System Refill - Tier 2 Equivalent Engine
-
41.7 gal (US)
-
Engine Crankcase
-
35.1 gal (US)
-
Power Train
-
120 gal (US)
-
Power Train - Refill Volume
-
103.3 gal (US)
-
Final Drive - Each
-
12.4 gal (US)
-
Roller Frames - Each
-
24.8 gal (US)
-
Hydraulic Tank
-
42.2 gal (US)
-
Hydraulic System Tank and Chassis
-
64.7 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Standard)
-
117.6 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
-
143.4 gal (US)
-
Dimensions - D11
Ground Clearance*
-
31.4 in
-
Track Gauge
-
114 in
-
Width at Outside of Track (710 mm Track Shoe)
-
142 in
-
Height (ROPS/canopy)*
-
185.9 in
-
Length of Track on Ground
-
175 in
-
Length with SU-Blade** - No rear attachment
-
337.8 in
-
Overall Length SU-Blade and SS Ripper**
-
414.4 in
-
Note
-
*Includes grouser height for total dimensions on hard surfaces.