Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
-
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
-
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
-
Engine Power - Gross SAE J1995
-
477 HP
-
Engine Power - ISO 14396
-
468 HP
-
Engine Power - Net SAE J1349/ISO 9249
-
440 HP
-
Weights
Operating Weight
154888 lb
110225 lb
-
Shipping Weight
111739 lb
84373 lb
-
Note (1)
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
-
Note (2)
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
-
Undercarriage
Shoe Type
Extreme Service (ES)
Extreme Service
-
Width - Shoe
24 in
24 in
-
Shoes/Side
44
43
-
Grouser Height
3.7 in
3.3 in
-
Pitch
10.2 in
9.4 in
-
Ground Clearance
28.5 in
18.1 in
-
Track Gauge
100.4 in
88.6 in
-
Length - Track on Ground
152.8 in
136.6 in
-
Ground Contact Area
7347 in²
45.6 ft²
-
Track Rollers/Side
8
8
-
Number of Carrier Rollers
1 per side (optional)
1 per side (optional)
-
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
-
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
-
Sound
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
-
Note
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
-
-
Sound (1)
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
-
Note (1)
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
-
-
Note (2)
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
-
-
Note (3)
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
-
-
Sound (2)
-
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
-
Transmission
1.0 Forward
2.5 mile/h
2.2 mile/h
-
1.5 Forward
3.4 mile/h
-
-
2.0 Forward
4.5 mile/h
3.9 mile/h
-
2.5 Forward
6 mile/h
-
-
3.0 Forward
7.8 mile/h
6.8 mile/h
-
1.0 Reverse
3.2 mile/h
2.7 mile/h
-
1.5 Reverse
4.2 mile/h
-
-
2.0 Reverse
5.6 mile/h
4.8 mile/h
-
2.5 Reverse
7.5 mile/h
-
-
3.0 Reverse
9.8 mile/h
8.4 mile/h
-
Transmission Clutch Diameter
17 in
-
-
Type
Planetary powershift
Planetary powershift
-
Blades
10SU ABR - Capacity (SAE J1265)
24.2 yd³
-
-
10SU ABR - Width (over end bits)
194.5 in
-
-
10SU ABR - Height
83.5 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Nominal
25.23 in
-
-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.08 in³
-
-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.14 in
-
-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.86 in
-
-
10SU ABR - Ground Clearance - Maximum Tilt LH
56.3 in
-
-
10SU ABR - Ground Clearance - Maximum Tilt RH
56.3 in
-
-
10U ABR - Capacity (SAE J1265)
28.7 yd³
-
-
10U ABR - Width (over end bits)
207.1 in
-
-
10U ABR - Height
83.5 in
-
-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in
-
-
10U ABR - Digging Depth - Blade Pitch: Nominal
60 in
-
-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.1 in
-
-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.1 in
-
-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.9 in
-
-
10U ABR - Ground Clearance - Maximum Tilt LH
60.8 in
-
-
10U ABR - Ground Clearance - Maximum Tilt RH
60.8 in
-
-
10U ABR - Weights - Blade Weight*
23585 lb
-
-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
154888 lb
-
-
Note (1)
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
-
-
Note (2)
*Does not include hydraulic controls but includes blade cylinders, pusharms.
-
-
Note (3)
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
49233 lbf
35520 lbf
-
Maximum penetration depth (standard tip)
59.2 in
48.5 in
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
36 in
34.7 in
-
Weight
14209 lb
10701 lb
-
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type.
-
Pryout Force
-
74637 lbf
-
Number of Pockets
-
1
-
Total Operating Weight* (with SU Blade and noted ripper)
-
110205 lb
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
53055 lbf
38667 lbf
-
Maximum penetration depth (standard tip)
78.3 in
68 in
-
Weight
14548 lb
10981 lb
-
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Pryout Force
-
74412 lbf
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
32.2 in
-
Number of Pockets
-
1
-
Total Operating Weight* (with SU Blade and noted ripper)
-
110485 lb
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
Cat® C27
-
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
603 HP
-
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
722 HP
-
-
Engine Power - Gross SAE J1995* - Forward
631 HP
-
-
Engine Power - Gross SAE J1995* - Reverse
766 HP
-
-
Engine Power - ISO 14396* - Forward
622 HP
-
-
Engine Power - ISO 14396* - Reverse
756 HP
-
-
Displacement
1648 in³
-
-
Bore
5.4 in
-
-
Stroke
6 in
-
-
Emissions
U.S. EPA Tier 2 Equivalent
-
-
Note (1)
*Excludes all fan losses.
-
-
Note (2)
All Engine ratings apply at 1,800 rpm.
-
-
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
-
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
-
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
-
Fuel Tank Capacities
Fuel Tank - Usable Volume
323.3 gal (US)
-
-
Fuel Tank - Total Volume
335.2 gal (US)
-
-
Hydraulic Controls
Pump Type
Variable displacement piston
Piston-type geared to flywheel
-
Pump Output - Implement
112 gal/min
-
-
Note (1)
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
-
Fan Pump
21.7 gal/min
21 gal/min
-
Note (2)
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
-
Tilt Cylinder Flow - Rod End Flow
112 gal/min
53 gal/min
-
Tilt Cylinder Flow - Head End Flow
63.4 gal/min
53 gal/min
-
Lift Cylinder Relief Valve Setting
4061.1 psi
3800 lbf/in
-
Tilt Cylinder Relief Valve Setting
3872.5 psi
2799 psi
-
Ripper - Lift - Relief Valve Setting
4061.1 psi
3800 psi
-
Ripper - Pitch - Relief Valve Setting
4061.1 psi
3800 psi
-
Tank Capacity
32.2 gal (US)
24 gal/min
-
Cylinder Sizing - Blade Lift - Bore
5.5 in
-
-
Cylinder Sizing - Blade Tilt - Bore
8.3 in
-
-
Cylinder Sizing - Ripper Shank Lift - Bore
8.3 in
-
-
Cylinder Sizing - Ripper Shank Angle - Bore
7.1 in
-
-
Cylinder Sizing - Blade Lift - Stroke
65.1 in
-
-
Cylinder Sizing - Blade Tilt - Stroke
9.5 in
-
-
Cylinder Sizing - Ripper Shank Lift - Stroke
21.1 in
-
-
Cylinder Sizing - Ripper Shank Angle - Stroke
26 in
-
-
Note (3)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
-
Pump Output - Steering
-
96 gal/min
-
Steering System - Pressure
-
5874 psi
-
Dimensions (Approximate)
Ground Clearance*
28.5 in
18.1 in
-
Track Gauge
100.4 in
88.6 in
-
Width - Without Trunnions - 610 mm/24 in ES
130.4 in
-
-
Width - Over Trunnions
148 in
130.3 in
-
Height - FOPS Cab*
162.8 in
150.4 in
-
Height - Top of Stack*
171.5 in
152.6 in
-
Height - ROPS/Canopy*
173.5 in
157.5 in
-
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
*Includes grouser height for total dimensions on hard surfaces.
-
Length - Track on Ground
152.8 in
136.6 in
-
Overall Length - Basic Tractor
209.6 in
193.3 in
-
Length - With SU-Blade
292 in
-
-
Length - With U-Blade
305.1 in
274.3 in
-
Length - With Single-Shank Ripper
278.8 in
257 in
-
Length - With Multi-Shank Ripper
285.1 in
257.4 in
-
Overall Length - SU-Blade/SS Ripper
360.6 in
323.6 in
-
Width - Without Trunnions - Standard Shoe
-
113 in
-
Drawbar Height (Center of Clevis)*
-
30 in
-
Length - Basic Tractor - With Drawbar
-
206.4 in
-
Length - Basic Tractor - With Winch
-
218.3 in
-
Length - With SU-Blade**
-
259.9 in
-
FLUID CAPACITIES
Cooling System Refill – Tier 4 Final Engine
46.2 gal (US)
-
-
Engine Crankcase Sump
27.2 gal (US)
-
-
Power Train - Total Volume
81.4 gal (US)
-
-
Power Train - Refill Volume
74.8 gal (US)
-
-
Final Drives (each)
12.2 gal (US)
4 gal (US)
-
Track Roller Frames (each)
16.9 gal (US)
-
-
Pivot Shaft Oil
9.5 gal (US)
8 gal (US)
-
Hydraulic System Tank
32.2 gal (US)
24 gal (US)
-
Fuel Tank (Splash Fill)
-
254 gal (US)
-
DEF Tank (Tier 4 only)
-
9.5 gal (US)
-
Fuel Tank (Fast Fill)
-
248 gal (US)
-
Cooling System
-
21 gal (US)
-
Engine Crankcase*
-
10 gal (US)
-
Powertrain
-
40 gal (US)
-
Roller Frames (each)
-
12 gal (US)
-
Note
-
*With oil filters.
-
Note 2
-
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
-
Note 3
-
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
-
Note 4
-
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
-
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model
-
Cat® C18
-
Engine Power - Net SAE J1349/ISO 9249
-
452 HP
-
Bore
-
5.7 in³
-
Stroke
-
7.2 in
-
Displacement
-
1106 in³
-
Engine Power - Gross SAE J1995
-
487 HP
-
Engine Power - ISO 14396
-
479 HP
-
Emissions
-
U.S. EPA Tier 2 or Tier 3 equivalent
-
Note (1)
-
All engine ratings apply at 1,750 rpm.
-
Note (2)
-
No derating required up to 4267 m (14,000 ft) altitude.
-
Blade - Semi-Universal
Blade Capacity (SAE J1265)
-
17.8 yd³
-
Blade Width (over end bits)
-
171.3 in
-
Blade Height
-
76.1 in
-
Maximum Digging Depth
-
23.9 in
-
Ground Clearance at Full Lift
-
56 in
-
Maximum Tilt
-
37 in
-
Blade Weight
-
10587 lb
-
Total Operating Weight* (with blade and single-shank ripper)
-
110205 lb
-
Note
-
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Blade - Universal
Blade Capacity (SAE J1265)
-
21.7 yd³
-
Blade Width (over end bits)
-
184.3 in
-
Blade Height
-
76.1 in
-
Maximum Digging Depth
-
23.9 in
-
Ground Clearance at Full Lift
-
56 in
-
Maximum Tilt
-
39.9 in
-
Blade Weight
-
12016 lb
-
Total Operating Weight* (with blade and single-shank ripper)
-
111362 lb
-
Note
-
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical
-
34621 lbf
-
Maximum Penetration - Standard Tip
-
31.4 in
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
-
81156 lbf
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
34.6 in
-
Number of Pockets
-
3
-
Weight
-
12136 lb
-
Total Operating Weight* - With SU-Blade and Ripper
-
111739 lb
-
Note
-
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
Winches
Winch Model
-
PA 140VS
-
Weight*
-
3950 lb
-
Oil Capacity
-
4 gal (US)
-
Drum Width
-
12.6 in
-
Wire Cable Diameter - Recommended
-
1.13 in
-
Wire Cable Diameter - Optional
-
1.25 ft
-
Maximum Drum Capacity - Recommended Cable Length
-
257 in
-
Maximum Drum Capacity - Optional Cable Length
-
204 ft
-
Wire Cable Ferrule Size - Outside Diameter
-
2.4 in
-
Wire Cable Ferrule Size - Length
-
2.8 in
-
Note
-
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
