Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
298 HP
-
-
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
-
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
1226 HP
-
-
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
1327 lb/ft
-
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
1313 lb/ft
-
-
Displacement
9.3 L
1963.5 in³
-
Net Power
-
814 HP
-
Emissions
-
U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
-
Rated Speed
-
1750 rpm
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard
-
900 HP
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient
-
937 HP
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard
-
907 HP
-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient
-
944 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard
-
884 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient
-
921 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard
-
893 HP
-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient
-
931 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard
-
814 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient
-
814 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard
-
823 HP
-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient
Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec
-
-
Bucket Capacities
Bucket Range
2.8-11.9 m³ 3.75-15.5 yd³
-
-
Transmission
Forward - 1
4.3 mile/h
4.3 mile/h
-
Forward - 2
8 mile/h
7.4 mile/h
-
Forward - 3
14.1 mile/h
12.7 mile/h
-
Forward - 4
24.5 mile/h
-
-
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
-
-
Reverse - 1
4.3 mile/h
4.7 mile/h
-
Reverse - 2
8 mile/h
8.1 mile/h
-
Reverse - 3
17.9 mile/h
13.9 mile/h
-
Transmission Type
-
Cat Planetary Powershift
-
Direct Drive - Forward 1
-
Disabled
-
Direct Drive - Forward 2
-
8 mile/h
-
Direct Drive - Forward 3
-
14 mile/h
-
Direct Drive - Reverse 1
-
5 mile/h
-
Direct Drive - Reverse 2
-
8.8 mile/h
-
Direct Drive - Reverse 3
-
15.3 mile/h
-
Sound
Note (1)
** For machines in European Union countries and in countries that adopt the EU Directives.
-
-
Note (2)
***European Union Directive 2000/14/EC as amended by 2005/88/EC.
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
105
-
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
67 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
107 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
74
-
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
67 dB(A)
-
-
With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
-
-
Operating Specifications
Breakout Force
38999 lb
-
-
Note (1)
For a machine configuration as defined under �Weight.�
-
-
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
15981 kg
-
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
32727 lb
-
-
Operating Weight
-
233430 lb
-
Rated Payload - Standard
-
25.5 ton (US)
-
Rated Payload - Standard (Material Handler)
-
30 ton (US)
-
Rated Payload - High Lift
-
22.5 ton (US)
-
Rated Payload - High Lift (Material Handler)
-
27 ton (US)
-
Bucket Capacity Range
-
11.5-24.5 m³ (15-32 yd³)
-
Cat Truck Match - Standard
-
775/777
-
Cat Truck Match - High Lift
-
785
-
Service Refill Capacities
Cooling System
17.4 gal (US)
-
-
Crankcase
6.1 gal (US)
31.7 gal (US)
-
DEF Tank
6.9 gal (US)
-
-
Differential - Final Drives - Front
15.1 gal (US)
96.4 gal (US)
-
Differential - Final Drives - Rear
15.1 gal (US)
96.4 gal (US)
-
Fuel Tank
80.1 gal (US)
385.7 gal (US)
-
Hydraulic Tank
30.1 gal (US)
-
-
Transmission
16.6 gal (US)
51.5 gal (US)
-
Cooling Systems
-
59.4 gal (US)
-
Hydraulic System Factory Fill (Implement)
-
104.1 gal (US)
-
Hydraulic Tank - Implement
-
60.2 gal (US)
-
Hydraulic Factory Fill (Steering)
-
32.5 gal (US)
-
Hydraulic Tank (Steering Tank Only)
-
26.3 gal (US)
-
Hydraulic System
Implement System - Maximum Operating Pressure
4496 psi
-
-
Implement System - Maximum Pump Output at 2,250 rpm
92 gal/min
-
-
Hydraulic Cycle Time - Total
10.1 seconds
-
-
Dimensions
Note
All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires.
-
-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
8.1 ft
-
-
Centerline of Rear Axle to Hitch
5.1 ft
-
-
Ground Clearance
1.4 ft
-
-
Height - Top of Exhaust Pipe
11.8 ft
-
-
Height - Top of Hood
9.5 ft
-
-
Height - Top of ROPS
11.1 ft
-
-
Hinge Pin Height at Carry
2.6 ft
-
-
Hinge Pin Height at Maximum Lift
15.9 ft
-
-
Lift Arm Clearance at Maximum Lift
13.8 ft
-
-
Overall Length - Without Bucket
26.6 ft
-
-
Tread Width
7.3 ft
-
-
Wheel Base
11.8 ft
-
-
Rack Back at Ground
37 degrees
-
-
Width over Tires (Loaded)
9.11 ft
-
-
Rack Back - Maximum Lift
71 degrees
-
-
Rack Back - Carry Height
49 degrees
-
-
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
7.7 ft
-
-
Centerline of Rear Axle to Hitch
5.1 ft
-
-
Ground Clearance
424 mm
-
-
Height - Top of Exhaust Pipe
3531 mm
-
-
Height - Top of Hood
2580 mm
-
-
Height - Top of ROPS
3593 mm
-
-
Hinge Pin Height at Carry
2 ft
-
-
Hinge Pin Height at Maximum Lift
4245 mm
-
-
Lift Arm Clearance at Maximum Lift
3687 mm
-
-
Overall Length - Without Bucket
7399 mm
-
-
Tread Width
7.3 ft
-
-
Wheel Base
3550 mm
-
-
Width over Tires (Loaded)
9.11 ft
-
-
Rack Back - Carry Height
50 degrees
-
-
Rack Back at Ground
40 degrees
-
-
Rack Back - Maximum Lift
62 degrees
-
-
Buckets
Bucket Capacities
-
11.5-24.5 m³ (15-32 yd³)
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
Positive Flow Control
-
Lift/Tilt System - Pump
-
Variable Displacement Piston
-
Maximum Flow at 2,165 rpm
-
250 gal/min
-
Relief Valve Setting - Lift/Tilt
-
5000 psi
-
Lift Cylinder - Bore
-
9.3 in
-
Lift Cylinder - Stroke
-
63.5 in
-
Tilt Cylinder - Bore
-
11.5 in
-
Tilt Cylinder - Stroke
-
41.5 in
-
Hydraulic Cycle Times
Rack Back
-
2.3 s
-
Rack Back - High Lift
-
2.3 s
-
Raise
-
9 s
-
Raise - High Lift
-
9 s
-
Dump
-
2.6 s
-
Dump - High Lift
-
2.6 s
-
Float Down
-
3.2 s
-
Float Down - High Lift
-
3.2 s
-
Total Hydraulic Cycle Time
-
17.1 s
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
±9°
-
Brakes
Brakes
-
ISO 3450:2011
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, Load Sensing
-
Steering System - Pump
-
Piston, Variable Displacement
-
Maximum Flow at 1,400-1,850 rpm
-
70 gal/min
-
Steering Cut Off Pressure
-
4500 psi
-
Total Steering Angle
-
80°
-
Steering Cycle Times - Low Idle
-
4.9 s
-
Steering Cycle Times - High Idle
-
3.1 s
-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
-
109.4 °F
-
Ambient Capability, Hydraulically Driven Demand Fan - High
