CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    966 XE
    View Product
    992 Wheel Loader
    View Product Remove
    990 Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - -
    Engine Model Cat C9.3B Cat® C32B C27 Cat®
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 298 HP - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1226 HP - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - -
    Displacement 9.3 L 1963.5 in³ 1649.5 in³
    Net Power - 814 HP -
    Emissions - U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent
    Rated Speed - 1750 rpm 1,800/min
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 HP -
    Bore - 5.7 in 5.4 in
    Stroke - 6.4 in 6 in
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf -
    Engine Power - ISO 14396 - - 752 HP
    Gross Power - SAE J1995 - - 766 HP
    Net Power - SAE J1349 - Standard Ambient - - 699 HP
    Net Power - SAE J1349 - High Ambient - - 648 HP
    Peak Torque - 1,200 rpm - - 2624 lb/ft
    Torque Rise - - 18 %

    Weights
    Operating Weight 51124 lb - -
    Note Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec - -

    Bucket Capacities
    Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - -

    Transmission
    Forward - 1 4.3 mile/h 4.3 mile/h 4.5 mile/h
    Forward - 2 8 mile/h 7.4 mile/h 8.3 mile/h
    Forward - 3 14.1 mile/h 12.7 mile/h 14.2 mile/h
    Forward - 4 24.5 mile/h - -
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
    Reverse - 1 4.3 mile/h 4.7 mile/h 4.9 mile/h
    Reverse - 2 8 mile/h 8.1 mile/h 9.1 mile/h
    Reverse - 3 17.9 mile/h 13.9 mile/h 15.5 mile/h
    Transmission Type - Cat Planetary Powershift Cat planetary power shift
    Direct Drive - Forward 1 - Disabled Lock-up disabled
    Direct Drive - Forward 2 - 8 mile/h 8.5 mile/h
    Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h
    Direct Drive - Reverse 1 - 5 mile/h 5.4 mile/h
    Direct Drive - Reverse 2 - 8.8 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 15.3 mile/h 16.4 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 105 - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 74 - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).

    Operating Specifications
    Breakout Force 38999 lb - -
    Note (1) For a machine configuration as defined under �Weight.� - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - -
    Operating Weight - 233430 lb 178517 lb
    Rated Payload - Standard - 25.5 ton (US) 17.5 ton (US)
    Rated Payload - Standard (Material Handler) - 30 ton (US) -
    Rated Payload - High Lift - 22.5 ton (US) 17.5 ton (US)
    Rated Payload - High Lift (Material Handler) - 27 ton (US) -
    Bucket Capacity Range - 11.5-24.5 m³ (15-32 yd³) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
    Cat Truck Match - Standard - 775/777 773-775
    Cat Truck Match - High Lift - 785 775-777

    Service Refill Capacities
    Cooling System 17.4 gal (US) - 54.9 gal (US)
    Crankcase 6.1 gal (US) 31.7 gal (US) -
    DEF Tank 6.9 gal (US) - -
    Differential - Final Drives - Front 15.1 gal (US) 96.4 gal (US) 71.6 gal (US)
    Differential - Final Drives - Rear 15.1 gal (US) 96.4 gal (US) 68.9 gal (US)
    Fuel Tank 80.1 gal (US) 385.7 gal (US) 294.3 gal (US)
    Hydraulic Tank 30.1 gal (US) - -
    Transmission 16.6 gal (US) 51.5 gal (US) 29.1 gal (US)
    Cooling Systems - 59.4 gal (US) -
    Hydraulic System Factory Fill (Implement) - 104.1 gal (US) -
    Hydraulic Tank - Implement - 60.2 gal (US) -
    Hydraulic Factory Fill (Steering) - 32.5 gal (US) -
    Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) -
    Engine Crankcase - - 20 gal (US)
    Hydraulic System Factory Fill - - 210 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 68.9 gal (US)
    Hydraulic Tank - Steering and Braking - - 34.9 gal (US)
    Note - - All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - -
    Implement System - Maximum Pump Output at 2,250 rpm 92 gal/min - -
    Hydraulic Cycle Time - Total 10.1 seconds - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 1.4 ft - -
    Height - Top of Exhaust Pipe 11.8 ft - -
    Height - Top of Hood 9.5 ft - -
    Height - Top of ROPS 11.1 ft - -
    Hinge Pin Height at Carry 2.6 ft - -
    Hinge Pin Height at Maximum Lift 15.9 ft - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - -
    Overall Length - Without Bucket 26.6 ft - -
    Tread Width 7.3 ft - -
    Wheel Base 11.8 ft - -
    Rack Back at Ground 37 degrees - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Maximum Lift 71 degrees - -
    Rack Back - Carry Height 49 degrees - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 7.7 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 424 mm - -
    Height - Top of Exhaust Pipe 3531 mm - -
    Height - Top of Hood 2580 mm - -
    Height - Top of ROPS 3593 mm - -
    Hinge Pin Height at Carry 2 ft - -
    Hinge Pin Height at Maximum Lift 4245 mm - -
    Lift Arm Clearance at Maximum Lift 3687 mm - -
    Overall Length - Without Bucket 7399 mm - -
    Tread Width 7.3 ft - -
    Wheel Base 3550 mm - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Carry Height 50 degrees - -
    Rack Back at Ground 40 degrees - -
    Rack Back - Maximum Lift 62 degrees - -

    Buckets
    Bucket Capacities - 11.5-24.5 m³ (15-32 yd³) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control Positive flow control
    Lift/Tilt System - Pump - Variable Displacement Piston -
    Maximum Flow at 2,165 rpm - 250 gal/min -
    Relief Valve Setting - Lift/Tilt - 5000 psi 4786 psi
    Lift Cylinder - Bore - 9.3 in -
    Lift Cylinder - Stroke - 63.5 in -
    Tilt Cylinder - Bore - 11.5 in -
    Tilt Cylinder - Stroke - 41.5 in -
    Lift/Tilt System - - Variable displacement piston
    Maximum Flow at 1,800 rpm (1) - - 240 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 235 mm × 1287 mm (9.3 in × 50.7 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 292.1 mm × 820 mm (11.5 in × 32.3 in)
    Pilot System - - Open loop and pressure reducing
    Relief Valve Setting - Main - - 507 psi

    Hydraulic Cycle Times
    Rack Back - 2.3 s 4.3 s
    Rack Back - High Lift - 2.3 s -
    Raise - 9 s 8.2 s
    Raise - High Lift - 9 s -
    Dump - 2.6 s 2.9 s
    Dump - High Lift - 2.6 s -
    Float Down - 3.2 s -
    Float Down - High Lift - 3.2 s -
    Total Hydraulic Cycle Time - 17.1 s -
    Lower - - 3.7 s
    Lower Float Down - - 3.6 s
    Total Hydraulic Cycle Time - Empty Bucket - - 13.8 s

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - ±9° 8.5°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450: 2011

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing Pilot, load sensing
    Steering System - Pump - Piston, Variable Displacement Piston, variable displacement
    Maximum Flow at 1,400-1,850 rpm - 70 gal/min -
    Steering Cut Off Pressure - 4500 psi -
    Total Steering Angle - 80° 70°
    Steering Cycle Times - Low Idle - 4.9 s -
    Steering Cycle Times - High Idle - 3.1 s -
    Maximum Flow at 1,400 rpm - - 96.2 gal/min
    Relief Valve Setting - Steering - - 5004 psi

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F -
    Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F -

    Sound Performance - Standard
    Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) -
    Operator Sound Level (ISO 6396:2008) - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 115 dB(A)

    Sound Performance - Suppression
    Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) -
    Operator Sound Level (ISO 6396:2008) - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 113 dB(A)

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - 17 ft -
    Ground to Top of ROPS - 18.3 ft -
    Ground to Top of Hood - 13.1 ft -
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft -
    Ground to Lower Hitch Clearance - 2.2 ft -
    Reach - Maximum Lift - 8.2 ft -
    Clearance at Maximum Lift - 15.2 ft -
    B-Pin Height - Maximum Lift - 22.8 ft -
    Maximum Overall Height - Bucket Raised - 30.8 ft -
    Rear Axle - Centerline to Bumper - 13.5 ft -
    Tread Width - 10.83 ft -
    Rack Back Angle - Maximum Lift - 56.9 degrees -
    Dump Angle at Maximum Lift - -49.5 degrees -
    Rack Back Angle - Ground Level - 40.2 degrees -
    Width - Over Tires - With Bulge - 14.74 ft -
    Rack Back Angle - Carry - 48.9 degrees -
    Wheel Base - 19.3 ft -
    Maximum Overall Length - 50.8 ft -
    Front Axle Centerline to Bucket Tip - 18 ft -

    Dimensions - High Lift - Approximate
    Tread Width - 10.83 ft -
    Rack Back Angle - Ground Level - 42.5 degrees -
    Dump Angle at Maximum Lift - -48.1 degrees -
    Rack Back Angle - Maximum Lift - 56.2 degrees -
    Width - Over Tires - With Bulge - 14.75 ft -
    Rack Back Angle - Carry - 51.6 degrees -
    Ground to Top of Exhaust Stacks - 17 ft -
    Ground to Top of ROPS - 18.3 ft -
    Ground to Top of Hood - 13.1 ft -
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft -
    Ground to Lower Hitch Clearance - 2.2 ft -
    Reach - Maximum Lift - 7.6 ft -
    Clearance at Maximum Lift - 17.2 ft -
    B-Pin Height - Maximum Lift - 24.5 ft -
    Maximum Overall Height - Bucket Raised - 32 ft -
    Rear Axle - Centerline to Bumper - 13.5 ft -
    Wheel Base - 19.3 ft -
    Maximum Overall Length - 51.6 ft -
    Front Axle Centerline to Bucket Tip - 18.8 ft -
    Add a Similar Product: