CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    966 XE
    View Product
    992 Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - -
    Engine Model Cat C9.3B Cat® C32B Cat® 3516E
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 298 HP - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1226 HP - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - The gross power advertised is with the fan at maximum speed.
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - -
    Displacement 9.3 L 1963.5 in³ 4766 in³
    Net Power - 814 HP -
    Emissions - U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Rated Speed - 1750 rpm -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 HP -
    Bore - 5.7 in 6.7 in
    Stroke - 6.4 in 8.5 in
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf -
    Engine Power - ISO 14396 - - 1847 HP
    Gross Power - SAE J1995 - - 1870 HP
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - 1696 HP
    Peak Torque - 1,200 rpm - SAE J1995 - - 8549 lb/ft
    Torque Rise - - 39%

    Weights
    Operating Weight 51124 lb - -
    Note Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec - -

    Bucket Capacities
    Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - -

    Transmission
    Forward - 1 4.3 mile/h 4.3 mile/h 4.6 mile/h
    Forward - 2 8 mile/h 7.4 mile/h 8 mile/h
    Forward - 3 14.1 mile/h 12.7 mile/h 13.6 mile/h
    Forward - 4 24.5 mile/h - -
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - Travel speeds based on 58/85-57 tires.
    Reverse - 1 4.3 mile/h 4.7 mile/h 5 mile/h
    Reverse - 2 8 mile/h 8.1 mile/h 8.8 mile/h
    Reverse - 3 17.9 mile/h 13.9 mile/h 14.9 mile/h
    Transmission Type - Cat Planetary Powershift Cat Planetary Power Shift
    Direct Drive - Forward 1 - Disabled Lock-up disables
    Direct Drive - Forward 2 - 8 mile/h 8.7 mile/h
    Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h
    Direct Drive - Reverse 1 - 5 mile/h Lock-up disables
    Direct Drive - Reverse 2 - 8.8 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 15.3 mile/h 16.8 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 105 - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 74 - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). - -

    Operating Specifications
    Breakout Force 38999 lb - -
    Note (1) For a machine configuration as defined under �Weight.� - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - -
    Operating Weight - 233430 lb -
    Rated Payload - Standard - 25.5 ton (US) -
    Rated Payload - Standard (Material Handler) - 30 ton (US) -
    Rated Payload - High Lift - 22.5 ton (US) -
    Rated Payload - High Lift (Material Handler) - 27 ton (US) -
    Bucket Capacity Range - 11.5-24.5 m³ (15-32 yd³) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - Standard - 775/777 785/789
    Cat Truck Match - High Lift - 785 789/793/794
    Operating Weight - Standard - - 543772 lb
    Operating Weight - High Lift - - 547675 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Service Refill Capacities
    Cooling System 17.4 gal (US) - -
    Crankcase 6.1 gal (US) 31.7 gal (US) -
    DEF Tank 6.9 gal (US) - -
    Differential - Final Drives - Front 15.1 gal (US) 96.4 gal (US) -
    Differential - Final Drives - Rear 15.1 gal (US) 96.4 gal (US) -
    Fuel Tank 80.1 gal (US) 385.7 gal (US) -
    Hydraulic Tank 30.1 gal (US) - -
    Transmission 16.6 gal (US) 51.5 gal (US) -
    Cooling Systems - 59.4 gal (US) -
    Hydraulic System Factory Fill (Implement) - 104.1 gal (US) -
    Hydraulic Tank - Implement - 60.2 gal (US) -
    Hydraulic Factory Fill (Steering) - 32.5 gal (US) -
    Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) -

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - -
    Implement System - Maximum Pump Output at 2,250 rpm 92 gal/min - -
    Hydraulic Cycle Time - Total 10.1 seconds - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 1.4 ft - -
    Height - Top of Exhaust Pipe 11.8 ft - -
    Height - Top of Hood 9.5 ft - -
    Height - Top of ROPS 11.1 ft - -
    Hinge Pin Height at Carry 2.6 ft - -
    Hinge Pin Height at Maximum Lift 15.9 ft - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - -
    Overall Length - Without Bucket 26.6 ft - -
    Tread Width 7.3 ft - -
    Wheel Base 11.8 ft - -
    Rack Back at Ground 37 degrees - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Maximum Lift 71 degrees - -
    Rack Back - Carry Height 49 degrees - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 7.7 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 424 mm - -
    Height - Top of Exhaust Pipe 3531 mm - -
    Height - Top of Hood 2580 mm - -
    Height - Top of ROPS 3593 mm - -
    Hinge Pin Height at Carry 2 ft - -
    Hinge Pin Height at Maximum Lift 4245 mm - -
    Lift Arm Clearance at Maximum Lift 3687 mm - -
    Overall Length - Without Bucket 7399 mm - -
    Tread Width 7.3 ft - -
    Wheel Base 3550 mm - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Carry Height 50 degrees - -
    Rack Back at Ground 40 degrees - -
    Rack Back - Maximum Lift 62 degrees - -

    Buckets
    Bucket Capacities - 11.5-24.5 m³ (15-32 yd³) -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control Positive Flow Control
    Lift/Tilt System - Pump - Variable Displacement Piston Variable Displacement Piston
    Maximum Flow at 2,165 rpm - 250 gal/min -
    Relief Valve Setting - Lift/Tilt - 5000 psi 5004 psi
    Lift Cylinder - Bore - 9.3 in -
    Lift Cylinder - Stroke - 63.5 in -
    Tilt Cylinder - Bore - 11.5 in -
    Tilt Cylinder - Stroke - 41.5 in -
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - - Open Loop and Pressure Reducing

    Hydraulic Cycle Times
    Rack Back - 2.3 s 4.9 s
    Rack Back - High Lift - 2.3 s -
    Raise - 9 s 12.6 s
    Raise - High Lift - 9 s -
    Dump - 2.6 s 3.1 s
    Dump - High Lift - 2.6 s -
    Float Down - 3.2 s -
    Float Down - High Lift - 3.2 s -
    Total Hydraulic Cycle Time - 17.1 s -
    Lower Float Down - - 4.2 s

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - ±9° 9°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing Pilot, Load Sensing
    Steering System - Pump - Piston, Variable Displacement Piston, Variable Displacement
    Maximum Flow at 1,400-1,850 rpm - 70 gal/min -
    Steering Cut Off Pressure - 4500 psi -
    Total Steering Angle - 80° 80 degrees
    Steering Cycle Times - Low Idle - 4.9 s 7.6 s
    Steering Cycle Times - High Idle - 3.1 s 4.3 s

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F 109.4 °F
    Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Sound Performance - Standard
    Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)

    Sound Performance - Suppression
    Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - 17 ft 23.2 ft
    Ground to Top of ROPS - 18.3 ft 23.4 ft
    Ground to Top of Hood - 13.1 ft 18.6 ft
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft 4.4 ft
    Ground to Lower Hitch Clearance - 2.2 ft 2.9 ft
    Reach - Maximum Lift - 8.2 ft 9.6 ft
    Clearance at Maximum Lift - 15.2 ft 19.8 ft
    B-Pin Height - Maximum Lift - 22.8 ft 28.8 ft
    Maximum Overall Height - Bucket Raised - 30.8 ft 39.3 ft
    Rear Axle - Centerline to Bumper - 13.5 ft 20.4 ft
    Tread Width - 10.83 ft 14.1 ft
    Rack Back Angle - Maximum Lift - 56.9 degrees -
    Dump Angle at Maximum Lift - -49.5 degrees –50.0 degrees
    Rack Back Angle - Ground Level - 40.2 degrees 39.7 degrees
    Width - Over Tires - With Bulge - 14.74 ft 18.8 ft
    Rack Back Angle - Carry - 48.9 degrees 47.7 degrees
    Wheel Base - 19.3 ft 22.3 ft
    Maximum Overall Length - 50.8 ft 64.6 ft
    Front Axle Centerline to Bucket Tip - 18 ft 21.9 ft
    Ground to Center of Axles - - 6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees

    Dimensions - High Lift - Approximate
    Tread Width - 10.83 ft 14.1 ft
    Rack Back Angle - Ground Level - 42.5 degrees 45 degrees
    Dump Angle at Maximum Lift - -48.1 degrees –50.0 degrees
    Rack Back Angle - Maximum Lift - 56.2 degrees -
    Width - Over Tires - With Bulge - 14.75 ft 18.8 ft
    Rack Back Angle - Carry - 51.6 degrees 53.5 degrees
    Ground to Top of Exhaust Stacks - 17 ft 23.2 ft
    Ground to Top of ROPS - 18.3 ft 23.4 ft
    Ground to Top of Hood - 13.1 ft 18.6 ft
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft 4.4 ft
    Ground to Lower Hitch Clearance - 2.2 ft 2.9 ft
    Reach - Maximum Lift - 7.6 ft 9.4 ft
    Clearance at Maximum Lift - 17.2 ft 22.6 ft
    B-Pin Height - Maximum Lift - 24.5 ft 31.6 ft
    Maximum Overall Height - Bucket Raised - 32 ft 42.1 ft
    Rear Axle - Centerline to Bumper - 13.5 ft 20.4 ft
    Wheel Base - 19.3 ft 22.3 ft
    Maximum Overall Length - 51.6 ft 66.9 ft
    Front Axle Centerline to Bucket Tip - 18.8 ft 24.2 ft
    Ground to Center of Axles - - 6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.
    Add a Similar Product: