Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011
298 HP
-
-
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
-
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011
1226 HP
-
-
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
1327 lb/ft
-
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
1313 lb/ft
-
-
Displacement
9.3 L
-
-
Weights
Operating Weight
51124 lb
-
-
Note
Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec
-
-
Bucket Capacities
Bucket Range
2.8-11.9 m³ 3.75-15.5 yd³
-
-
Transmission
Forward - 1
4.3 mile/h
-
-
Forward - 2
8 mile/h
-
-
Forward - 3
14.1 mile/h
-
-
Forward - 4
24.5 mile/h
-
-
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
-
-
Reverse - 1
4.3 mile/h
-
-
Reverse - 2
8 mile/h
-
-
Reverse - 3
17.9 mile/h
-
-
Sound
Note (1)
** For machines in European Union countries and in countries that adopt the EU Directives.
-
-
Note (2)
***European Union Directive 2000/14/EC as amended by 2005/88/EC.
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
105
-
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
67 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
107 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
74
-
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
67 dB(A)
-
-
With Cooling Fan Speed at Maximum Value - Note
Distance of 15 m (49.2 ft), moving forward in second gear ratio.
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
-
-
Operating Specifications
Breakout Force
38999 lb
-
-
Note (1)
For a machine configuration as defined under �Weight.�
-
-
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
15981 kg
-
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
32727 lb
-
-
Service Refill Capacities
Cooling System
17.4 gal (US)
-
-
Crankcase
6.1 gal (US)
-
-
DEF Tank
6.9 gal (US)
-
-
Differential - Final Drives - Front
15.1 gal (US)
-
-
Differential - Final Drives - Rear
15.1 gal (US)
-
-
Fuel Tank
80.1 gal (US)
-
-
Hydraulic Tank
30.1 gal (US)
-
-
Transmission
16.6 gal (US)
-
-
Hydraulic System
Implement System - Maximum Operating Pressure
4496 psi
-
-
Implement System - Maximum Pump Output at 2,250 rpm
92 gal/min
-
-
Hydraulic Cycle Time - Total
10.1 seconds
-
-
Dimensions
Note
All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires.