*Engine meets U.S. EPA Tier 4 Final emission standards.
-
-
Weights
Operating Weight
9414 lb
-
-
Buckets
Bucket Capacities
0.6-1.0 m3 (0.8-1.3 yd3)
-
-
Bucket Capacities - General Purpose
0.6 m3 (0.8 yd3)
-
-
Bucket Capacities - Light Material
1.0 m3 (1.3 yd3)
-
-
Transmission
Travel Speed
12.4 mile/h
-
-
Hydraulic System
Main Relief
3481 psi
-
-
3rd Auxiliary Flow
14 gal/min
-
-
Hydraulic Cycle Time - Lower, Float
2.4 s
-
-
Loader Hydraulic System
Hydraulic Cycle Time - Lift
4.4 s
-
-
Hydraulic Cycle Time - Dump
0.7 s
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 Level I
-
-
Service Refill Capacities
Cooling System
3 gal (US)
-
-
Fuel Tank
11.4 gal (US)
-
-
Hydraulic System
6.3 gal (US)
-
-
Engine Oil
2.4 gal (US)
-
-
Dimensions (Approximate) - Standard Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
15.75 ft
-
-
Reach at Maximum Dump Height*
2.33 ft
-
-
Dig Depth
6 in
-
-
Maximum Dump Height*
7.5 ft
-
-
Load Over Height
9.17 ft
-
-
Hinge Pin at Maximum Height
10.08 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.08 ft
-
-
Reach - Ground Level
2.67 ft
-
-
Maximum Reach
4.5 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
9.83 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.17 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Dimensions (Approximate) - High Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
16.17 ft
-
-
Reach at Maximum Dump Height*
2.42 ft
-
-
Dig Depth
8 in
-
-
Maximum Dump Height*
8 ft
-
-
Load Over Height
9.67 ft
-
-
Hinge Pin at Maximum Height
10.58 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.58 ft
-
-
Reach - Ground Level
3.25 ft
-
-
Maximum Reach
4.92 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
10.33 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.42 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Operating Specifications - Standard Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6160 lbf
-
-
Operating Weight
9414 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2701 lb
-
-
Straight Tipping Load - Bucket***
6415 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5401 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5512 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3366 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2524 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Operating Specifications - High Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6204 lbf
-
-
Operating Weight
9462 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2502 lb
-
-
Straight Tipping Load - Bucket***
5975 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5004 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5115 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3148 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2361 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Maximum Material Densities - General Purpose
Bucket Type
General Purpose
-
-
Rated Capacity
0.8 yd³
-
-
Dump Height
90 in
-
-
Maximum Material Density
3169 lb/yd³
-
-
Bucket Width
70 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
-
-
Maximum Material Densities - Light Material
Bucket Type
Light Material
-
-
Rated Capacity
1.3 yd³
-
-
Dump Height
85 in
-
-
Maximum Material Density
1989 lb/yd³
-
-
Bucket Width
74 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
