*Engine meets U.S. EPA Tier 4 Final emission standards.
-
-
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
-
404 HP
-
Note (1)
-
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
Note (3)
-
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
Engine Power @ 1,700 rpm – ISO 14396:2002
-
432 HP
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
-
1636 lb/ft
-
Gross Power @ 1,700 rpm – SAE J1995:2014
-
436 HP
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
-
1515 lb/ft
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
-
1620 lb/ft
-
Weights
Operating Weight
9414 lb
78264 lb
-
Note
-
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
Buckets
Bucket Capacities
0.6-1.0 m3 (0.8-1.3 yd3)
-
-
Bucket Capacities - General Purpose
0.6 m3 (0.8 yd3)
-
-
Bucket Capacities - Light Material
1.0 m3 (1.3 yd3)
-
-
Transmission
Travel Speed
12.4 mile/h
-
-
Forward - 1
-
3.9 mile/h
-
Forward - 2
-
7.3 mile/h
-
Forward - 3
-
13 mile/h
-
Forward - 4
-
24.5 mile/h
-
Note
-
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
-
Reverse - 1
-
4.4 mile/h
-
Reverse - 2
-
8.4 mile/h
-
Reverse - 3
-
17.4 mile/h
-
Hydraulic System
Main Relief
3481 psi
-
-
3rd Auxiliary Flow
14 gal/min
-
-
Hydraulic Cycle Time - Lower, Float
2.4 s
-
-
Implement System - Maximum Operating Pressure
-
4975 psi
-
Implement System - Maximum Pump Output at 2,250 rpm
-
119 gal/min
-
Hydraulic Cycle Time - Total
-
10.1 seconds
-
Loader Hydraulic System
Hydraulic Cycle Time - Lift
4.4 s
-
-
Hydraulic Cycle Time - Dump
0.7 s
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 Level I
-
-
Service Refill Capacities
Cooling System
3 gal (US)
13.7 gal (US)
-
Fuel Tank
11.4 gal (US)
112.5 gal (US)
-
Hydraulic System
6.3 gal (US)
-
-
Engine Oil
2.4 gal (US)
-
-
Crankcase
-
9.8 gal (US)
-
DEF Tank
-
5.5 gal (US)
-
Differential - Final Drives - Front
-
24.3 gal (US)
-
Differential - Final Drives - Rear
-
24.3 gal (US)
-
Hydraulic Tank
-
40.4 gal (US)
-
Transmission
-
20.3 gal (US)
-
Dimensions (Approximate) - Standard Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
15.75 ft
-
-
Reach at Maximum Dump Height*
2.33 ft
-
-
Dig Depth
6 in
-
-
Maximum Dump Height*
7.5 ft
-
-
Load Over Height
9.17 ft
-
-
Hinge Pin at Maximum Height
10.08 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.08 ft
-
-
Reach - Ground Level
2.67 ft
-
-
Maximum Reach
4.5 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
9.83 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.17 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Dimensions (Approximate) - High Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
16.17 ft
-
-
Reach at Maximum Dump Height*
2.42 ft
-
-
Dig Depth
8 in
-
-
Maximum Dump Height*
8 ft
-
-
Load Over Height
9.67 ft
-
-
Hinge Pin at Maximum Height
10.58 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.58 ft
-
-
Reach - Ground Level
3.25 ft
-
-
Maximum Reach
4.92 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
10.33 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.42 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Operating Specifications - Standard Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6160 lbf
-
-
Operating Weight
9414 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2701 lb
-
-
Straight Tipping Load - Bucket***
6415 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5401 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5512 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3366 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2524 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Operating Specifications - High Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6204 lbf
-
-
Operating Weight
9462 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2502 lb
-
-
Straight Tipping Load - Bucket***
5975 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5004 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5115 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3148 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2361 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Maximum Material Densities - General Purpose
Bucket Type
General Purpose
-
-
Rated Capacity
0.8 yd³
-
-
Dump Height
90 in
-
-
Maximum Material Density
3169 lb/yd³
-
-
Bucket Width
70 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
-
-
Maximum Material Densities - Light Material
Bucket Type
Light Material
-
-
Rated Capacity
1.3 yd³
-
-
Dump Height
85 in
-
-
Maximum Material Density
1989 lb/yd³
-
-
Bucket Width
74 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
-
-
Sustainability
Recyclability
97%
-
-
Bucket Capacities
Bucket Range
-
4.8-17.2 m³ 6.25-22.5 yd³
-
Sound
Note (1)
-
* For machines in European Union countries and in countries that adopt the “EU Directives.”
-
Note (2)
-
European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
-
107
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
-
110 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
-
75
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
Operating Specifications
Breakout Force
-
59060 lbf
-
Note (1)
-
For a machine configuration as defined under Weight.
-
Note (2)
-
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
-
22418 kg
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
-
46526 lb
-
Dimensions
Note
-
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
