982 XE
Product description
The Cat® 982 XE Wheel Loader delivers increased fuel efficiency, premium performance with simple-to-use standard technologies to boost operator efficiencies, and lower maintenance costs. This machine is designed to meet emission standards without interrupting operation. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.
Engine
- Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 404HP
- Engine Model - Cat C13
- Note (1) - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
- Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
- Note (3) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
- Engine Power @ 1,700 rpm – ISO 14396:2002 - 432HP
- Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1636lb/ft
- Gross Power @ 1,700 rpm – SAE J1995:2014 - 436HP
- Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1515lb/ft
- Displacement - 12.5L
- Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1620lb/ft
Weights
- Operating Weight - 78264lb
- Note - Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
Bucket Capacities
- Bucket Range - 4.8-17.2 m³ 6.25-22.5 yd³
Transmission
- Forward - 1 - 3.9mile/h
- Forward - 2 - 7.3mile/h
- Forward - 3 - 13mile/h
- Forward - 4 - 24.5mile/h
- Note - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
- Reverse - 1 - 4.4mile/h
- Reverse - 2 - 8.4mile/h
Sound
- Note (1) - * For machines in European Union countries and in countries that adopt the “EU Directives.”
- Note (2) - European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
- With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 107
- With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 70dB(A)
- With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 110dB(A)
- With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 75
- With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 70dB(A)
Air Conditioning System
- Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
Operating Specifications
- Breakout Force - 59060lbf
- Note (1) - For a machine configuration as defined under Weight.
- Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Static Tipping Load - Full 40° Turn - No Tire Deflection - 22418kg
- Static Tipping Load - Full 40° Turn - With Tire Deflection - 46526lb
Service Refill Capacities
- Cooling System - 13.7gal (US)
- Crankcase - 9.8gal (US)
- DEF Tank - 5.5gal (US)
- Differential - Final Drives - Front - 24.3gal (US)
- Differential - Final Drives - Rear - 24.3gal (US)
- Fuel Tank - 112.5gal (US)
- Hydraulic Tank - 40.4gal (US)
- Transmission - 20.3gal (US)
Hydraulic System
- Implement System - Maximum Operating Pressure - 4975psi
- Implement System - Maximum Pump Output at 2,250 rpm - 119gal/min
- Hydraulic Cycle Time - Total - 10.1 seconds
Dimensions
- Note - All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
Dimensions - High Lift
- Centerline of Rear Axle to Edge of Counterweight - 9.4ft
- Centerline of Rear Axle to Hitch - 6.3ft
- Ground Clearance - 1.4ft
- Height - Top of Exhaust Pipe - 12.4ft
- Height - Top of Hood - 10ft
- Height - Top of ROPS - 12.6ft
- Hinge Pin Height at Carry - 2.11ft
- Hinge Pin Height at Maximum Lift - 16.1ft
- Lift Arm Clearance at Maximum Lift - 13.4ft
- Overall Length - Without Bucket - 29.11ft
- Tread Width - 8.4ft
- Wheel Base - 12.6ft
- Width over Tires (Loaded) - 11.5ft
Dimensions - Standard Lift
- Centerline of Rear Axle to Edge of Counterweight - 8.95ft
- Centerline of Rear Axle to Hitch - 6.3ft
- Ground Clearance - 428mm
- Height - Top of Exhaust Pipe - 3736mm
- Height - Top of Hood - 3036mm
- Height - Top of ROPS - 3801mm
- Hinge Pin Height at Carry - 2.7ft
- Hinge Pin Height at Maximum Lift - 4741mm
- Lift Arm Clearance at Maximum Lift - 3902mm
- Overall Length - Without Bucket - 8597mm
- Tread Width - 8.4ft
- Wheel Base - 3800mm
- Width over Tires (Loaded) - 11.5ft
Standard Equipment:
-
- Operator Environment
-
- Cab, pressurized, sound suppression
- EH implement controls, parking brake
- Steering, joystick
- Seat, suede/cloth, air suspension, heated
- Touchscreen display
- Visibility: mirrors, rear-vision camera
- Mirrors, heated
- Air conditioner, heater, defroster (auto temp, fan)
- Sun visor, front, retractable
- Sun visor, rear, retractable
- Window cleaning platform, front
- Windows, front, safety laminated rounded glass
-
- On-board Technologies
-
- Cat Payload scale
- Autodig with Auto Set Tires
- Operator ID & machine security
- Application Profiles
- Job Aids
- Controls Help and eOMM
-
- Power Train
-
- Cat C13 engine
- Electric fuel priming pump
- Fuel-water separator and secondary fuel filter
- Engine, air precleaner
- Axles, open differentials
- Axles, ecology drains
- Transmission, continuous variable
- Rimpull control
- Throttle lock mode
- Service brakes, hydraulic, fully enclosed wet disc, wear indicators
- Hill and speed hold on grades
- Park brake, caliper on front axles, spring applied-pressure released
-
- Hydraulics
-
- Implement system, load sensing with variable displacement piston pump
- Steering system, load sensing with dedicated variable displacement piston pump
- Ride control, dual accumulators
- Oil sampling valves, Cat XT™ hoses
-
- Electrical
-
- Starting and charging system, 24V
- Starter, electric, heavy duty
- Lights: halogen, 4 work lights, 2 rear-vision lights
- Lights: roading with turn signals
-
- Monitoring System
-
- Front dash with analog gauges, LCD display, and warning lights
- Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
-
- Linkage
-
- Standard lift, Z-bar
- Kickouts: lift and tilt
Optional Equipment:
-
- Operator Environment
-
- Door, remote opening system
- Entertainment radio (FM, AM, USB, BT)
- Entertainment radio (DAB+)
- CB radio ready
- Seat, leather/cloth, air suspension, heated/ cooled
- 360° vision system
- Cat Detect rear radar system
- Dedicated rearview screen
- Windows, front, heavy duty, or full guards
-
- On-board Technologies
-
- Cat Advanced Payload
- Cat Payload Printer
-
- Power Train
-
- Turbine, air precleaner
- Radiator, high debris
- Cooling fan, reversible
- Axles, limited slip differential(s)
- Axles, AOC ready, extreme temperature seals
- Axles, oil cooler
-
- Hydraulics
-
- 3rd auxiliary function with ride control
- Quick coupler control
-
- Electrical
-
- Cold start, 120V or 240V
- Lights: LED
- Warning beacon
-
- Monitoring System
-
- Reversing strobe lights
-
- Linkage
-
- High lift, Z-bar
-
- Additional Equipment
-
- Cat Autolube system
- Fenders, extensions or roading
- Guards: power train, crankcase, cab, cylinders, rear
- Biodegradable hydraulic oil
- High-speed oil change system
- Fast fill fuel tank
- Toolbox
- Wheel chocks
- Secondary steering system, electrical
-
- Special Configurations
-
- Aggregate handler
- Waste and industrial
- Forestry, logger