*Engine meets U.S. EPA Tier 4 Final emission standards.
-
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent
-
Engine Power - ISO 14396
-
1847 HP
-
Gross Power - SAE J1995
-
1870 HP
-
Net Power - SAE J1349 - Standard Ambient
-
1739 HP
-
Net Power - SAE J1349 - High Ambient
-
1696 HP
-
Peak Torque - 1,200 rpm - SAE J1995
-
8549 lb/ft
-
Torque Rise
-
39%
-
Note (1)
-
The power ratings apply when tested under the reference conditions for the specified standard.
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
-
Note (3)
-
The gross power advertised is with the fan at maximum speed.
-
Weights
Operating Weight
9414 lb
-
-
Buckets
Bucket Capacities
0.6-1.0 m3 (0.8-1.3 yd3)
-
-
Bucket Capacities - General Purpose
0.6 m3 (0.8 yd3)
-
-
Bucket Capacities - Light Material
1.0 m3 (1.3 yd3)
-
-
Transmission
Travel Speed
12.4 mile/h
-
-
Transmission Type
-
Cat Planetary Power Shift
-
Forward - 1
-
4.6 mile/h
-
Forward - 2
-
8 mile/h
-
Forward - 3
-
13.6 mile/h
-
Reverse - 1
-
5 mile/h
-
Reverse - 2
-
8.8 mile/h
-
Reverse - 3
-
14.9 mile/h
-
Direct Drive - Forward 1
-
Lock-up disables
-
Direct Drive - Forward 2
-
8.7 mile/h
-
Direct Drive - Forward 3
-
15.2 mile/h
-
Direct Drive - Reverse 1
-
Lock-up disables
-
Direct Drive - Reverse 2
-
9.6 mile/h
-
Direct Drive - Reverse 3
-
16.8 mile/h
-
Note
-
Travel speeds based on 58/85-57 tires.
-
Hydraulic System
Main Relief
3481 psi
-
-
3rd Auxiliary Flow
14 gal/min
-
-
Hydraulic Cycle Time - Lower, Float
2.4 s
-
-
Loader Hydraulic System
Hydraulic Cycle Time - Lift
4.4 s
-
-
Hydraulic Cycle Time - Dump
0.7 s
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 Level I
-
-
Service Refill Capacities
Cooling System
3 gal (US)
-
-
Fuel Tank
11.4 gal (US)
-
-
Hydraulic System
6.3 gal (US)
-
-
Engine Oil
2.4 gal (US)
-
-
Dimensions (Approximate) - Standard Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
15.75 ft
-
-
Reach at Maximum Dump Height*
2.33 ft
-
-
Dig Depth
6 in
-
-
Maximum Dump Height*
7.5 ft
-
-
Load Over Height
9.17 ft
-
-
Hinge Pin at Maximum Height
10.08 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.08 ft
-
-
Reach - Ground Level
2.67 ft
-
-
Maximum Reach
4.5 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
9.83 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.17 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Dimensions (Approximate) - High Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
16.17 ft
-
-
Reach at Maximum Dump Height*
2.42 ft
-
-
Dig Depth
8 in
-
-
Maximum Dump Height*
8 ft
-
-
Load Over Height
9.67 ft
-
-
Hinge Pin at Maximum Height
10.58 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.58 ft
-
-
Reach - Ground Level
3.25 ft
-
-
Maximum Reach
4.92 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
10.33 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.42 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Operating Specifications - Standard Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6160 lbf
-
-
Operating Weight
9414 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2701 lb
-
-
Straight Tipping Load - Bucket***
6415 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5401 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5512 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3366 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2524 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Operating Specifications - High Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6204 lbf
-
-
Operating Weight
9462 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2502 lb
-
-
Straight Tipping Load - Bucket***
5975 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5004 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5115 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3148 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2361 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Maximum Material Densities - General Purpose
Bucket Type
General Purpose
-
-
Rated Capacity
0.8 yd³
-
-
Dump Height
90 in
-
-
Maximum Material Density
3169 lb/yd³
-
-
Bucket Width
70 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
-
-
Maximum Material Densities - Light Material
Bucket Type
Light Material
-
-
Rated Capacity
1.3 yd³
-
-
Dump Height
85 in
-
-
Maximum Material Density
1989 lb/yd³
-
-
Bucket Width
74 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
-
-
Sustainability
Recyclability
97%
-
-
Operating Specifications
Operating Weight - Standard
-
543772 lb
-
Bucket Capacity Range
-
17.2-43.6 m3 (22.3-57 yd3)
-
Operating Weight - High Lift
-
547675 lb
-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
-
60 ton (US)
-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
-
50 ton (US)
-
Rated Payload - High Lift (Low to Moderate Digging Resistance)
-
55 ton (US)
-
Rated Payload - High Lift (Moderate to High Digging Resistance)
-
50 ton (US)
-
Note
-
*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
-
Cat Truck Match - Standard
-
785/789
-
Cat Truck Match - High Lift
-
789/793/794
-
Complete System Fill
Fuel Tank - Standard
-
856 gal (US)
-
Fuel Tank - With 24 hr Attachment
-
1414 gal (US)
-
Cooling System
-
138 gal (US)
-
Engine Crankcase
-
76 gal (US)
-
Transmission
-
110 gal (US)
-
Differential - Final Drives - Front
-
220 gal (US)
-
Differential - Final Drives - Rear
-
200 gal (US)
-
Hydraulic Tank - Implement and Hydraulic Fan
-
270 gal (US)
-
Hydraulic Tank - Steering and Braking
-
100 gal (US)
-
Oil Renewal System (ORS)*
-
20 gal (US)
-
Note
-
*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
9°
-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
-
109.4 °F
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
-
131 °F
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
-
127.4 °F
-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
-
74 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
119 dB(A)
-
Note
-
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
-
73 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
117 dB(A)
-
Note
-
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, Load Sensing
-
Steering System - Pump
-
Piston, Variable Displacement
-
Total Steering Angle
-
80 degrees
-
Steering Cycle Times - Low Idle
-
7.6 s
-
Steering Cycle Times - High Idle
-
4.3 s
-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift
-
28.8 ft
-
Clearance at Maximum Lift
-
19.8 ft
-
Dump Angle at Maximum Lift
-
–50.0 degrees
-
Front Axle Centerline to Bucket Tip
-
21.9 ft
-
Ground to Bumper Clearance
-
4.4 ft
-
Ground to Center of Axles
-
6 ft
-
Ground to Lower Hitch Clearance
-
2.9 ft
-
Ground to Top of Exhaust Stacks
-
23.2 ft
-
Ground to Top of Hood
-
18.6 ft
-
Ground to Top of ROPS
-
23.4 ft
-
Maximum Overall Height - Bucket Raised
-
39.3 ft
-
Maximum Overall Length
-
64.6 ft
-
Note
-
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
-
Rack Angle at Maximum Lift
-
59.5 degrees
-
Rack Back Angle - Carry
-
47.7 degrees
-
Rack Back Angle - Ground Level
-
39.7 degrees
-
Reach - Maximum Lift
-
9.6 ft
-
Rear Axle - Centerline to Bumper
-
20.4 ft
-
Tread Width
-
14.1 ft
-
Wheel Base
-
22.3 ft
-
Width - Over Tires - With Bulge
-
18.8 ft
-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift
-
31.6 ft
-
Clearance at Maximum Lift
-
22.6 ft
-
Dump Angle at Maximum Lift
-
–50.0 degrees
-
Front Axle Centerline to Bucket Tip
-
24.2 ft
-
Ground to Bumper Clearance
-
4.4 ft
-
Ground to Center of Axles
-
6 ft
-
Ground to Lower Hitch Clearance
-
2.9 ft
-
Ground to Top of Exhaust Stacks
-
23.2 ft
-
Ground to Top of Hood
-
18.6 ft
-
Ground to Top of ROPS
-
23.4 ft
-
Maximum Overall Height - Bucket Raised
-
42.1 ft
-
Maximum Overall Length
-
66.9 ft
-
Note
-
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
