*Engine meets U.S. EPA Tier 4 Final emission standards.
-
-
Peak Power Speed
-
1600
-
Peak Power Speed - Gross - SAE J1995
-
456 HP
-
Engine Power - ISO 14396
-
449 HP
-
Net Power - SAE J1349
-
373 HP
-
Rated Speed
-
2000
-
Rated Speed - 2,000 rpm - EEC 80/1269
-
373 HP
-
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
-
378 HP
-
Rated Speed - 2,000 rpm - ISO 9249
-
373 HP
-
Rated Speed - 2,000 rpm - ISO 9249 (DIN)
-
378 HP
-
Peak Torque - 1,200 rpm - SAE J1995
-
1778 lb/ft
-
Torque Rise
-
16%
-
Emissions
-
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
-
Weights
Operating Weight
9414 lb
-
-
Buckets
Bucket Capacities
0.6-1.0 m3 (0.8-1.3 yd3)
-
-
Bucket Capacities - General Purpose
0.6 m3 (0.8 yd3)
-
-
Bucket Capacities - Light Material
1.0 m3 (1.3 yd3)
-
-
Transmission
Travel Speed
12.4 mile/h
-
-
Transmission Type
-
Cat planetary power shift
-
Forward - 1
-
5 mile/h
-
Forward - 2
-
8 mile/h
-
Direct Drive - Forward 2
-
8 mile/h
-
Direct Drive - Forward 3
-
14 mile/h
-
Direct Drive - Forward 4
-
24 mile/h
-
Reverse - 1
-
5 mile/h
-
Reverse - 2
-
8 mile/h
-
Direct Drive - Reverse 2
-
9 mile/h
-
Direct Drive - Reverse 3
-
16 mile/h
-
Direct Drive - Reverse 4
-
25.4 mile/h
-
Hydraulic System
Main Relief
3481 psi
-
-
3rd Auxiliary Flow
14 gal/min
-
-
Hydraulic Cycle Time - Lower, Float
2.4 s
-
-
Loader Hydraulic System
Hydraulic Cycle Time - Lift
4.4 s
-
-
Hydraulic Cycle Time - Dump
0.7 s
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 Level I
-
-
Service Refill Capacities
Cooling System
3 gal (US)
-
-
Fuel Tank
11.4 gal (US)
141 gal (US)
-
Hydraulic System
6.3 gal (US)
-
-
Engine Oil
2.4 gal (US)
-
-
Fuel Tank - Short Lift
-
127 gal (US)
-
Cooling Systems
-
26 gal (US)
-
Crankcase
-
9 gal (US)
-
Diesel Exhaust Fluid Tank
-
6 gal (US)
-
Transmission
-
20 gal (US)
-
Axle Oil - Differentials and Final Drives - Front
-
49 gal (US)
-
Axle Oil - Differentials and Final Drives - Rear
-
45 gal (US)
-
Hydraulic System Factory Fill
-
87 gal (US)
-
Hydraulic System - Tank Only
-
34 gal (US)
-
Dimensions (Approximate) - Standard Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
15.75 ft
-
-
Reach at Maximum Dump Height*
2.33 ft
-
-
Dig Depth
6 in
-
-
Maximum Dump Height*
7.5 ft
-
-
Load Over Height
9.17 ft
-
-
Hinge Pin at Maximum Height
10.08 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.08 ft
-
-
Reach - Ground Level
2.67 ft
-
-
Maximum Reach
4.5 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
9.83 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.17 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Dimensions (Approximate) - High Lift
Cab Height
8.25 ft
-
-
Ground Clearance
10 in
-
-
Wheel Base
6.42 ft
-
-
Overall Length - With Bucket*
16.17 ft
-
-
Reach at Maximum Dump Height*
2.42 ft
-
-
Dig Depth
8 in
-
-
Maximum Dump Height*
8 ft
-
-
Load Over Height
9.67 ft
-
-
Hinge Pin at Maximum Height
10.58 ft
-
-
Departure Angle - Degrees
30°
-
-
Overall Length - With Forks
17.58 ft
-
-
Reach - Ground Level
3.25 ft
-
-
Maximum Reach
4.92 ft
-
-
Fork Depth Above Ground
2 in
-
-
Fork Height at Maximum Reach
4.67 ft
-
-
Maximum Fork Height
10.33 ft
-
-
Fork Reach at Maximum Height
2 ft
-
-
Turning Radius - Over Bucket*
13.42 ft
-
-
Turning Radius - Inside Tire**
5.92 ft
-
-
Width - Over Bucket*
5.83 ft
-
-
Tire Gauge
4.33 ft
-
-
Machine Width**
5.58 ft
-
-
Articulation Angle
40°
-
-
Steering Angle
80°
-
-
Dump Angle at Maximum Height
40°
-
-
Note (1)
*Vary with bucket size.
-
-
Note (2)
**Vary with tire size.
-
-
Note (3)
Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
-
-
Operating Specifications - Standard Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6160 lbf
-
-
Operating Weight
9414 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2701 lb
-
-
Straight Tipping Load - Bucket***
6415 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5401 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5512 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3366 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2524 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Operating Specifications - High Lift
Tire Size
33 × 15.5-16.5, 12 PR
-
-
Rated Bucket Capacity
0.8 yd³
-
-
Breakout Force
6204 lbf
-
-
Operating Weight
9462 lb
-
-
Rated Operating Load at Full Turn - Bucket***
2502 lb
-
-
Straight Tipping Load - Bucket***
5975 lb
-
-
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
5004 lb
-
-
Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
5115 lb
-
-
Rack Back - Transport Position
51°
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
3148 lb
-
-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
2361 lb
-
-
Note (1)
*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
-
-
Note (2)
**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
-
-
Note (3)
***Manual quick coupler, precleaner hood.
-
-
Note (4)
Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
-
-
Maximum Material Densities - General Purpose
Bucket Type
General Purpose
-
-
Rated Capacity
0.8 yd³
-
-
Dump Height
90 in
-
-
Maximum Material Density
3169 lb/yd³
-
-
Bucket Width
70 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
-
-
Maximum Material Densities - Light Material
Bucket Type
Light Material
-
-
Rated Capacity
1.3 yd³
-
-
Dump Height
85 in
-
-
Maximum Material Density
1989 lb/yd³
-
-
Bucket Width
74 in
-
-
Note
Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
-
-
Sustainability
Recyclability
97%
-
-
Operating Specifications
Operating Weight - Standard
-
97785 lb
-
Operating Weight - High Lift
-
104005 lb
-
Rated Payload - Standard (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (Standard)
-
14 ton (US)
-
Rated Payload - High Lift (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (High Lift)
-
12.1 ton (US)
-
Bucket Capacity Range
-
5-10,3 m³ (6,5-13,5 yd.³)
-
Cat Truck Match - Standard
-
770/735/740/745
-
Cat Truck Match - High Lift
-
772/773
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
Load Sense
-
Lift/Tilt System - Pump
-
2 × 110 cc variable displacement
-
Maximum Flow at 2,165 rpm
-
123 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4050 psi
-
Lift Cylinder - Bore
-
7.5 in
-
Lift Cylinder - Stroke
-
45 in
-
Tilt Cylinder - Bore
-
6.7 in
-
Tilt Cylinder - Stroke
-
28.4 in
-
Hydraulic Cycle Times
Rack Back
-
4.5 s
-
Raise
-
9 s
-
Dump
-
3.5 s
-
Lower
-
5.2 s
-
Lower Float Down
-
4.3 s
-
Total Hydraulic Cycle Time
-
21.3 s
-
Hydraulic System - Steering
Steering System - Circuit
-
Load Sense
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow at 1,400 rpm
-
52 gal/min
-
Steering Cut Off Pressure
-
4000 psi
-
Total Steering Angle
-
70°
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
±12.5°
-
Oscillation Angle - Chain Arrangement
-
±8.5°
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-
Sound Performance - Standard
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
112 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.1 ft
-
Clearance at Maximum Lift
-
10.1 ft
-
B-Pin Height - Maximum Lift
-
16.1 ft
-
Maximum Overall Height - Bucket Raised
-
22.4 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
36.6 ft
-
Front Axle Centerline to Bucket Tip
-
13.8 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.4 ft
-
Clearance at Maximum Lift
-
11.6 ft
-
B-Pin Height - Maximum Lift
-
17.6 ft
-
Maximum Overall Height - Bucket Raised
-
23.9 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
38 ft
-
Front Axle Centerline to Bucket Tip
-
15.3 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
