CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    160 Motor Grader
    View Product
    14 Motor Grader
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 221 HP 238 HP -
    Engine Model Cat® C9.3 Cat C13 Cat 7.1
    Bore 4.5 in 5.1 in 4.1 in
    Stroke 5.9 in 6.2 in 5.3 in
    Speed at Rated Power 2,000 rpm 1,850 rpm -
    VHP Plus - Gear - Net Power - Forward 1st 221 HP - -
    Standard Capability 109 °F 122 °F 122 °F
    Torque Rise 39% 41% -
    VHP Plus - Gear - Net Power - Forward 8th 272 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd 241 HP - -
    VHP Plus - Gear - Net Power - Forward 4th 252 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd 231 HP - -
    VHP Plus - Gear - Net Power - Forward 6th 262 HP - -
    Maximum Torque - VHP Plus 1000 lb/ft 1137 lb/ft -
    VHP Plus Range - Net 165-203 kW (221-272 hp) - -
    VHP Plus - Gear - Net Power - Forward 7th 267 HP - -
    VHP Plus - Gear - Net Power - Reverse 1st 221 HP - -
    Base Power (1st Gear) - Net - Metric 224 HP - -
    High Ambient - Fan Speed - Standard 1,400 rpm - -
    VHP Plus - Gear - Net Power - Forward 5th 257 HP - -
    VHP Plus - Gear - Net Power - Reverse 2nd 231 HP - -
    VHP Plus Range - Net - Metric 165-203 kW (224-276 hp) - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 241 HP - -
    Displacement 567.5 in³ 763 in³ 427.8 in³
    Number of Cylinders 6 6 6
    Derating Altitude 10000 ft - 9842.5 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm - -
    High Ambient - Fan Speed - Minimum 500 rpm - -
    High - Ambient Capability 122 °F - -
    Note (3) - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Power as declared per ISO 14396
    Note (2) - Optimized VHP Plus is standard for the 14M3. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Maximum Altitude - Full Power - 13900 ft -
    Maximum Altitude - Full Power (Tier 3) - 14349 ft -
    Maximum Altitude - Full Power (Tier 2) - 12049 ft -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
    Standard - Fan Speed - Minimum - 550 rpm -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) -
    Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. -
    Standard - Fan Speed - Maximum - 1,600 rpm -
    Maximum Torque - ISO 9249 - - 606 lb/ft
    All-Wheel Drive Net Power Range (Tier 3) - - 130 HP
    Net Power Range (Tier 3) - - 130 HP
    Engine RPM - - 2,000
    Maximum Torque - AWD On - - 611 lb/ft
    Derating Altitude (AWD) - - 5499 ft
    Torque Rise - ISO 9294 - - 42%

    Weights
    Operating Weight - Typically Equipped 45547 lb 57250 lb 35067 lb
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - -
    Gross Vehicle Weight - Base - Front Axle 9907 lb - -
    Gross Vehicle Weight - Base - Rear Axle 28812 lb - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - -
    Operating Weight - Typically Equipped - Front Axle 13237 lb - -
    Gross Vehicle Weight - Base - Total 38719 lb - -
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - -
    Operating Weight - Typically Equipped - Total 45547 lb - -
    Operating Weight - Typically Equipped - Rear Axle 32310 lb - -
    Gross Vehicle Weight - Base* - Total - 50980 lb -
    Gross Vehicle Weight - Base* - Front Axle - 13994 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 57250 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 15245 lb -
    Gross Vehicle Weight - Base* - Rear Axle - 36994 lb -
    Note - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. -

    Moldboard
    Blade Width 14 ft 14 ft 12 ft
    Moldboard - Height 24 in - -
    Moldboard - Thickness 0.87 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.6 in 4.1 in
    Cutting Edge Width 6 in - -
    Cutting Edge Thickness 0.6 in - -
    End Bit - Width 6 in - -
    End Bit - Thickness 0.6 in - -
    Blade Pull - Base GVW 25931 lb - -
    Blade Pull - Maximum GVW 34262 lb - -
    Blade Down Pressure - Base GVW 17004 lb - -
    Blade Down Pressure - Maximum GVW 29308 lb - -
    Moldboard - Blade Width 14 ft - -
    Blade Width - With End Bits - 169 in -
    Blade Height - With Cutting Edge - 24.9 in -
    Blade Width - Without End Bits - 164 in -
    Blade Height - Without Cutting Edge - 23 in -
    Blade Height - - 24 in
    End Bit - - 6 in
    Cutting Edge - - 6 in

    Operating Specifications
    Top Speed - Forward 29.5 mile/h - -
    Top Speed - Reverse 23.3 mile/h - -
    Turning Radius - Outside Front Tires 25.59 ft - -
    Steering Range - Left/Right 50° - -
    Articulation Angle - Left/Right 20° - -
    Forward - 1st 2.6 mile/h - -
    Forward - 2nd 3.5 mile/h - -
    Forward - 3rd 5.1 mile/h - -
    Forward - 4th 7 mile/h - -
    Forward - 5th 10.8 mile/h - -
    Forward - 6th 14.7 mile/h - -
    Forward - 7th 20.3 mile/h - -
    Forward - 8th 29.5 mile/h - -
    Reverse - 1st 2 mile/h - -
    Reverse - 2nd 3.8 mile/h - -
    Reverse - 3rd 5.5 mile/h - -
    Reverse - 4th 8.5 mile/h - -
    Reverse - 5th 16 mile/h - -
    Reverse - 6th 23.3 mile/h - -

    Service Refill
    Fuel Capacity 104 gal (US) - -
    Cooling System 15 gal (US) - -
    Hydraulic System - Total 26.4 gal (US) - -
    Hydraulic System - Tank 16.9 gal (US) - -
    Transmission - Differential - Final Drives 18.5 gal (US) - -
    Diesel Exhaust Fluid 5.8 gal (US) - -
    Engine Oil 7.9 gal (US) - -
    Tandem Housing - Each 22.9 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - -
    Circle Drive Housing 1.8 gal (US) - -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - -
    Transmission APECS, Direct Drive, Powershift - -
    Brakes - Service Multiple Oil Disc - -
    Brakes - Service - Surface Area 3565 in² - -
    Brakes - Parking Multiple Oil Disc - -
    Brakes - Secondary Dual Circuit Control - -

    Hydraulic System
    Circuit Type Parallel - -
    Pump Type Variable Piston - -
    Pump Output 55.5 gal/min - -
    Maximum System Pressure 3503 psi - -
    Reservoir Tank Capacity 16.9 gal (US) - -
    Standby Pressure 885 psi - -

    Frame
    Drawbar - Width 3 in - -
    Circle - Diameter 61.1 in - -
    Circle - Blade Beam Thickness 1.6 in - -
    Drawbar - Height 6 in - -
    Front Frame Structure - Width 12 in - -
    Circle - Height 6.3 in - -
    Front Frame Structure - Height 12.6 in - -
    Drawbar - Thickness 0.5 in - -
    Front-Top/Bottom Plate - Width 12 in - -
    Front-Top/Bottom Plate - Thickness 0.87 in - -
    Front Axle - Height to Center 23.5 in - -
    Front Axle - Wheel Lean - Left/Right 18° 17.1° -
    Front Axle - Total Oscillation per Side 32° 32° -
    Circle - Outer Diameter - 71.7 in -

    Blade Range
    Circle Centershift - Right 28.7 in 20.5 in -
    Circle Centershift - Left 27.4 in 25.6 in -
    Moldboard Sideshift - Right 26 in 31.1 in -
    Moldboard Sideshift - Left 20.1 in 29.1 in -
    Maximum Blade Position Angle 90° - -
    Blade Tip Range - Forward 40° 40° -
    Blade Tip Range - Backward 5° 5° -
    Maximum Lift Above Ground 17.8 in 16.5 in 16.1 in
    Maximum Depth of Cut 29.5 in 23.3 in 30.5 in
    Maximum Shoulder Reach Outside of Tires - Left 82.3 in 73.6 in -
    Maximum Shoulder Reach Outside of Tires - Right 89.7 in 78.9 in -
    Blade Tip Range Forward - - 40
    Maximum Shoulder Reach Right - - 76 in
    Moldboard Side Shift Right - - 26.1 in
    Maximum Shoulder Reach Left - - 69.4 in
    Moldboard Side Shift Left - - 20.1 in
    Circle Center Shift Left - - 26 in
    Blade Tip Range Backward - - 5
    Circle Center Shift Right - - 26 in

    Ripper
    Ripping Depth - Maximum 16.8 in - -
    Ripper Shank Holder Spacing 21 in - -
    Ripper Shank Holders 5 - -
    Penetration Force 20812 lb - -
    Pry-Out Force 28493 lb - -
    Machine Length Increase, Beam Raised 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - -
    Mid, V-Type - Working Width 46.6 in - -
    Rear - Scarifying Depth, Maximum 16.8 in - -
    Front, V-Type - Working Width 47.4 in - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - -
    Mid, V-Type - Scarifier Shank Holders 11 - -
    Rear - Working Width 84 in - -
    Rear - Scarifier Shank Holders 9 - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - -

    Standards
    Brakes ISO 3450 - -
    ROPS/FOPS ISO 3471; ISO 3449 - -
    Steering ISO 5010 - -
    Sound ISO 6394; ISO 6395 - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). -
    Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.

    Tandems
    Height 22.5 in - -
    Width 8 in - -
    Sidewall Thickness - Inner 0.69 in - -
    Sidewall Thickness - Outer 0.71 in - -
    Drive Chain Pitch 2 in - -
    Wheel Axle Spacing 60 in - -
    Tandem Oscillation - Front Up 15° - -
    Tandem Oscillation - Front Down 25° - -

    Dimensions
    Height - Top of Cab 130 in - -
    Length - Counterweight to Ripper 399 in - -
    Width - Outside Front Tires 98.9 in - -
    Length - Front Axle to Mid Tandem 241 in - -
    Length - Front Tire to Rear of Machine 351 in - -
    Length - Front Axle to Moldboard 100 in - -
    Length - Between Tandem Axles 60 in - -
    Width - Outside Rear Tires 98.9 in - -
    Width - Tire Center Lines 84.3 in - -
    Height - Front Axle Center 23.5 in - -
    Height - Exhaust Stack 128 in - -
    Height - Top of Cylinders 120 in - -
    Ground Clearance - Rear Axle 13.3 in - -
    Maximum Height - - 136.4 in
    Length of Machine* - - 387 in
    Width All Wheel Drive (AWD) - - 2551 mm
    Width - - 102 in
    Note - - *Typically equipped with push block and ripper.
    Basic Blade Width - - 12 ft

    Service Refill Capacities
    Transmission and Differential - 23.5 gal (US) 9 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5.8 gal (US) 5 gal (US)
    Hydraulic System - 33 gal (US) 25.6 gal (US)
    Circle Drive - 1.8 gal (US) 1.8 gal (US)
    Cooling System - 15.9 gal (US) 14 gal (US)
    Fuel Tank - 109.9 gal (US) 65 gal (US)
    Engine Crankcase - - 4.8 gal (US)

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
    Joystick Weight* Tier 4 - - 35358 lb
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb
    Add a Similar Product: