CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    160 Motor Grader
    View Product
    14 Motor Grader
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 221 HP 238 HP -
    Engine Model Cat® C9.3 Cat C13 -
    Bore 4.5 in 5.1 in -
    Stroke 5.9 in 6.2 in -
    Speed at Rated Power 2,000 rpm 1,850 rpm -
    VHP Plus - Gear - Net Power - Forward 1st 221 HP - -
    Standard Capability 109 °F 122 °F -
    Torque Rise 39% 41% -
    VHP Plus - Gear - Net Power - Forward 8th 272 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd 241 HP - -
    VHP Plus - Gear - Net Power - Forward 4th 252 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd 231 HP - -
    VHP Plus - Gear - Net Power - Forward 6th 262 HP - -
    Maximum Torque - VHP Plus 1000 lb/ft 1137 lb/ft -
    VHP Plus Range - Net 165-203 kW (221-272 hp) - -
    VHP Plus - Gear - Net Power - Forward 7th 267 HP - -
    VHP Plus - Gear - Net Power - Reverse 1st 221 HP - -
    Base Power (1st Gear) - Net - Metric 224 HP - -
    High Ambient - Fan Speed - Standard 1,400 rpm - -
    VHP Plus - Gear - Net Power - Forward 5th 257 HP - -
    VHP Plus - Gear - Net Power - Reverse 2nd 231 HP - -
    VHP Plus Range - Net - Metric 165-203 kW (224-276 hp) - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 241 HP - -
    Displacement 567.5 in³ 763 in³ -
    Number of Cylinders 6 6 -
    Derating Altitude 10000 ft - -
    High Ambient - Fan Speed - Maximum 1,550 rpm - -
    High Ambient - Fan Speed - Minimum 500 rpm - -
    High - Ambient Capability 122 °F - -
    Note (3) - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) - Optimized VHP Plus is standard for the 14M3. -
    Maximum Altitude - Full Power - 13900 ft -
    Maximum Altitude - Full Power (Tier 3) - 14349 ft -
    Maximum Altitude - Full Power (Tier 2) - 12049 ft -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Standard - Fan Speed - Minimum - 550 rpm -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) -
    Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. -
    Standard - Fan Speed - Maximum - 1,600 rpm -

    Weights
    Operating Weight - Typically Equipped 45547 lb 57250 lb -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - -
    Gross Vehicle Weight - Base - Front Axle 9907 lb - -
    Gross Vehicle Weight - Base - Rear Axle 28812 lb - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - -
    Operating Weight - Typically Equipped - Front Axle 13237 lb - -
    Gross Vehicle Weight - Base - Total 38719 lb - -
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - -
    Operating Weight - Typically Equipped - Total 45547 lb - -
    Operating Weight - Typically Equipped - Rear Axle 32310 lb - -
    Gross Vehicle Weight - Base* - Total - 50980 lb -
    Gross Vehicle Weight - Base* - Front Axle - 13994 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 57250 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 15245 lb -
    Gross Vehicle Weight - Base* - Rear Axle - 36994 lb -
    Note - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. -

    Moldboard
    Blade Width 14 ft 14 ft -
    Moldboard - Height 24 in - -
    Moldboard - Thickness 0.87 in - -
    Arc Radius 16.3 in 16.3 in -
    Throat Clearance 6.5 in 4.6 in -
    Cutting Edge Width 6 in - -
    Cutting Edge Thickness 0.6 in - -
    End Bit - Width 6 in - -
    End Bit - Thickness 0.6 in - -
    Blade Pull - Base GVW 25931 lb - -
    Blade Pull - Maximum GVW 34262 lb - -
    Blade Down Pressure - Base GVW 17004 lb - -
    Blade Down Pressure - Maximum GVW 29308 lb - -
    Moldboard - Blade Width 14 ft - -
    Blade Width - With End Bits - 169 in -
    Blade Height - With Cutting Edge - 24.9 in -
    Blade Width - Without End Bits - 164 in -
    Blade Height - Without Cutting Edge - 23 in -

    Operating Specifications
    Top Speed - Forward 29.5 mile/h - -
    Top Speed - Reverse 23.3 mile/h - -
    Turning Radius - Outside Front Tires 25.59 ft - -
    Steering Range - Left/Right 50° - -
    Articulation Angle - Left/Right 20° - -
    Forward - 1st 2.6 mile/h - -
    Forward - 2nd 3.5 mile/h - -
    Forward - 3rd 5.1 mile/h - -
    Forward - 4th 7 mile/h - -
    Forward - 5th 10.8 mile/h - -
    Forward - 6th 14.7 mile/h - -
    Forward - 7th 20.3 mile/h - -
    Forward - 8th 29.5 mile/h - -
    Reverse - 1st 2 mile/h - -
    Reverse - 2nd 3.8 mile/h - -
    Reverse - 3rd 5.5 mile/h - -
    Reverse - 4th 8.5 mile/h - -
    Reverse - 5th 16 mile/h - -
    Reverse - 6th 23.3 mile/h - -

    Service Refill
    Fuel Capacity 104 gal (US) - -
    Cooling System 15 gal (US) - -
    Hydraulic System - Total 26.4 gal (US) - -
    Hydraulic System - Tank 16.9 gal (US) - -
    Transmission - Differential - Final Drives 18.5 gal (US) - -
    Diesel Exhaust Fluid 5.8 gal (US) - -
    Engine Oil 7.9 gal (US) - -
    Tandem Housing - Each 22.9 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - -
    Circle Drive Housing 1.8 gal (US) - -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - -
    Transmission APECS, Direct Drive, Powershift - -
    Brakes - Service Multiple Oil Disc - -
    Brakes - Service - Surface Area 3565 in² - -
    Brakes - Parking Multiple Oil Disc - -
    Brakes - Secondary Dual Circuit Control - -

    Hydraulic System
    Circuit Type Parallel - -
    Pump Type Variable Piston - -
    Pump Output 55.5 gal/min - -
    Maximum System Pressure 3503 psi - -
    Reservoir Tank Capacity 16.9 gal (US) - -
    Standby Pressure 885 psi - -

    Frame
    Drawbar - Width 3 in - -
    Circle - Diameter 61.1 in - -
    Circle - Blade Beam Thickness 1.6 in - -
    Drawbar - Height 6 in - -
    Front Frame Structure - Width 12 in - -
    Circle - Height 6.3 in - -
    Front Frame Structure - Height 12.6 in - -
    Drawbar - Thickness 0.5 in - -
    Front-Top/Bottom Plate - Width 12 in - -
    Front-Top/Bottom Plate - Thickness 0.87 in - -
    Front Axle - Height to Center 23.5 in - -
    Front Axle - Wheel Lean - Left/Right 18° 17.1° -
    Front Axle - Total Oscillation per Side 32° 32° -
    Circle - Outer Diameter - 71.7 in -

    Blade Range
    Circle Centershift - Right 28.7 in 20.5 in -
    Circle Centershift - Left 27.4 in 25.6 in -
    Moldboard Sideshift - Right 26 in 31.1 in -
    Moldboard Sideshift - Left 20.1 in 29.1 in -
    Maximum Blade Position Angle 90° - -
    Blade Tip Range - Forward 40° 40° -
    Blade Tip Range - Backward 5° 5° -
    Maximum Lift Above Ground 17.8 in 16.5 in -
    Maximum Depth of Cut 29.5 in 23.3 in -
    Maximum Shoulder Reach Outside of Tires - Left 82.3 in 73.6 in -
    Maximum Shoulder Reach Outside of Tires - Right 89.7 in 78.9 in -

    Ripper
    Ripping Depth - Maximum 16.8 in - -
    Ripper Shank Holder Spacing 21 in - -
    Ripper Shank Holders 5 - -
    Penetration Force 20812 lb - -
    Pry-Out Force 28493 lb - -
    Machine Length Increase, Beam Raised 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - -
    Mid, V-Type - Working Width 46.6 in - -
    Rear - Scarifying Depth, Maximum 16.8 in - -
    Front, V-Type - Working Width 47.4 in - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - -
    Mid, V-Type - Scarifier Shank Holders 11 - -
    Rear - Working Width 84 in - -
    Rear - Scarifier Shank Holders 9 - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - -

    Standards
    Brakes ISO 3450 - -
    ROPS/FOPS ISO 3471; ISO 3449 - -
    Steering ISO 5010 - -
    Sound ISO 6394; ISO 6395 - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). -

    Tandems
    Height 22.5 in - -
    Width 8 in - -
    Sidewall Thickness - Inner 0.69 in - -
    Sidewall Thickness - Outer 0.71 in - -
    Drive Chain Pitch 2 in - -
    Wheel Axle Spacing 60 in - -
    Tandem Oscillation - Front Up 15° - -
    Tandem Oscillation - Front Down 25° - -

    Dimensions
    Height - Top of Cab 130 in - -
    Length - Counterweight to Ripper 399 in - -
    Width - Outside Front Tires 98.9 in - -
    Length - Front Axle to Mid Tandem 241 in - -
    Length - Front Tire to Rear of Machine 351 in - -
    Length - Front Axle to Moldboard 100 in - -
    Length - Between Tandem Axles 60 in - -
    Width - Outside Rear Tires 98.9 in - -
    Width - Tire Center Lines 84.3 in - -
    Height - Front Axle Center 23.5 in - -
    Height - Exhaust Stack 128 in - -
    Height - Top of Cylinders 120 in - -
    Ground Clearance - Rear Axle 13.3 in - -

    Service Refill Capacities
    Transmission and Differential - 23.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5.8 gal (US) -
    Hydraulic System - 33 gal (US) -
    Circle Drive - 1.8 gal (US) -
    Cooling System - 15.9 gal (US) -
    Fuel Tank - 109.9 gal (US) -
    Add a Similar Product: