CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    6015 Hydraulic Shovel
    View Product
    6040 Hydraulic Mining Shovel
    View Product Remove
    6060 Hydraulic Mining Shovel
    View Product Remove

    General
    Engine Output - SAE J1995 824 HP 2079 HP 3015 HP
    Bucket Payload 16.1 ton (US) 43.7 ton (US) 67 ton (US)
    Operating Weight 154.3 ton (US) 446 ton (US) 660 ton (US)
    Note Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available. Specifications above apply to the HRC Face Shovel configuration. Backhoe and Frontless configurations are also available for both HRC and LRC. Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.

    Engine - U.S. EPA Tier 4 Final
    Engine Model Cat® C27 - -
    Gross Power - SAE J1995 824 HP - -
    Net Power - SAE J1349 746 HP - -

    Engine - Cat C27 with Tier 4 Final Emission Standards
    Number of Cylinders 12 - -
    Bore 5.4 in - -
    Stroke 6 in - -
    Displacement 1648 in³ - -

    Engine - Equivalent to U.S. EPA Tier 2
    Engine Model Cat® C27 - -
    Gross Power - SAE J1995 839 HP - -
    Net Power - SAE J1349 746 HP - -

    Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards
    Number of Cylinders 12 - -
    Bore 5.4 in - -
    Stroke 6 in - -
    Displacement 1648 in³ - -
    Aspiration Turbocharged and air-to-air aftercooled - -

    Operating Weights - Backhoe
    Operating Weight 154 ton (US) - -

    Weights
    Ground Pressure 23.6 psi - -
    Note Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants - -
    Operating Weight 308000 lb - -

    Track
    Standard 28 in - -
    Wide 36 in - -
    Extra Wide 39 in - -
    Number of Shoes - Each Side 46 - -
    Number of Track Rollers - Each Side 9 - -
    Number of Carrier Rollers - Each Side 3 - -
    Track Pads Double grouser - -

    Drive
    Travel Speed - Two Stages - 1st Stage - Maximum 1.4 mile/h - -
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.1 mile/h - -
    Maximum Drawbar Pull - Forward 192886 lbf - -
    Maximum Drawbar Pull - Reverse 220987 lbf - -
    Gradeability - Travel Drives Approximately 42% - -
    Hydraulic Track Tensioning With accumulator - -
    Maximum Drawbar Pull 179847 lbf - -

    Service Refill Capacities
    Fuel Tank 449 gal (US) - 3136 gal (US)
    Cooling System 44 gal (US) - 211.4 gal (US)
    Engine Oil 23 gal (US) - 86.6 gal (US)
    Swing Drive 2.4 gal (US) - 42.4 gal (US)
    Hydraulic System - Including Tank 463 gal (US) - 2483 gal (US)
    Hydraulic Tank 253 gal (US) - 1876 gal (US)
    Grease Tank 18 gal (US) - 188 gal (US)

    Electrical System
    System Voltage 24 V - 24 V
    Batteries 4 × 200 Ah (12 V each) - -
    Alternator Rating 150 A (24 V) in total - -
    Components (1) Emergency stop in cabin, engine module, pump room and on service station accessible from ground level - 6 maintenance-free batteries
    Components (2) Four maintenance free batteries - Lockable battery isolator switch
    Components (3) Lockable battery isolation switch - Lockable starter isolator switch
    Components (5) 14 LED high-brightness working lights - 17 LED service lights
    Components (4) 5 LED service lights - 13 LED high-brightness working flood lights
    Components (6) 2 electric horns - 2 electric horns (1 cab module; 1 oil cooler module)
    Components (7) Two (2) lights for rear end - -
    Components (9) One (1) beacon light on cabin roof - -
    Components (8) One (1) light for machine deck/service - -
    Batteries in Series/Parallel Installation - - 6 x 210 Ah; 12 V each; 630 Ah 24 V in total

    Hydraulic System
    Main Pumps 3 × variable swash plate pumps - -
    Main Pumps - Maximum Total Oil Flow 407 gal/min - -
    Main Pumps - Maximum Pressure - Attachment 4641 psi - -
    Pilot Pump 1 × gear pump - -
    Pilot Pump - Maximum Flow, Pilot 40.4 gal/min - -
    Pilot Pump - Maximum Pressure, Pilot 1378 psi - -
    Main Pumps - Maximum Pressure - Travel 4641 psi - -
    Swing Pump 1 × variable swash plate pump - -
    Engine Fan Pump - Maximum Flow, Engine Fan 53.1 gal/min - -
    Engine Fan Pump - Maximum Pressure, Engine Fan 3191 psi - -
    Engine Fan Pump 1 × variable swash plate pump - -
    Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan 22.7 gal/min - -
    Swing Pump - Maximum Flow - Swing 127 gal/min - -
    Hydraulic Fan Pump 1 × variable swash plate pump - -
    Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan 1958 psi - -
    Swing Pump - Maximum Pressure - Swing 5294 psi - -
    Hydraulic Oil Cooling - Maximum Flow 284 gal/min - -
    Hydraulic Oil Cooling - Diameter of Fan 40 in - -
    Filters (1) Full-flow high-pressure filters (200 μm) for main pumps - -
    Filters (2) Full-flow filters (20 μm) for complete return circuit - -
    Filters (3) Pressure filters (16 μm) for servo circuit - -
    Filters (4) Full-flow filters (6 μm) for engine cooling return circuit - -
    Filters (5) Swing charge filter (15 μm) - -
    Filters (6) Pump case return screens (125 μm) - -

    Swing System
    Swing Drive Two (2) compact planetary transmissions with axial piston motors 3 compact planetary transmissions with axial piston motors 4 compact planetary transmissions with axial piston motors
    Parking Brake Wet multiple disc brake, spring-loaded/hydraulically released Wet multiple disc brake, spring-loaded/hydraulically released -
    Maximum Swing Speed 4.9 r/min - 3.8 r/min
    Swing Ring Cross roller bearing with sealed internal gearing Triple-race roller bearing with sealed internal gearing Triple-race roller bearing with sealed internal gearing
    Features (1) Closed-loop swing circuit with speed control Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
    Features (2) Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking Closed-loop swing circuit with torque control Closed-loop swing circuit with torque control
    Features (3) All raceways and the internal gearing of swing ring supplied by automatic central lubrication system Hydraulic braking of the swing motion by counteracting control Hydraulic braking of the swing motion by counteracting control
    Maximum Swing Speed - Diesel Version - 4.7 r/min -
    Features (4) - All raceways and the internal gearing of swing ring supplied by automatic central lubrication system All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
    Parking Brakes - - Wet multiple disc brake, spring loaded/hydraulically released

    Engine
    Emissions U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1 - -
    Engine Model - 2 x Cat C32 2 x Cat 3512E
    Gross Power - SAE J1995 - 2079 HP -
    Net Power - SAE J1349 - 1915 HP -
    Note - Power output relates to highly regulated engines. Lesser regulated engines are also available. -

    Centralized Service Area
    Feature Accessible from ground level - -
    Equipped With (1) Emergency stop - -
    Equipped With (2) Quick couplings for: Diesel fuel and Grease - -

    Undercarriage
    Travel Speed - Two Stages - 1st Stage - Maximum 1.6 mile/h - -
    Travel Speed - Two Stages - 2nd Stage - Maximum 2.3 mile/h - -
    Maximum Drawbar Pull - Forward 192886 lbf - -
    Maximum Tractive Force 197157 lbf 471260 lb 661160 lb
    Maximum Drawbar Pull - Reverse 220987 lbf - -
    Gradeability - Travel Drives 38°/78% (SAE J1309) - -
    Hydraulic Track Tensioning With accumulator - -
    Number of Shoes - Each Side 46 - -
    Number of Track Rollers - Each Side 9 - -
    Number of Carrier Rollers - Each Side 3 - -
    Components (1) Forged double-grouser track pads All running surfaces of sprockets, idlers, rollers and track links are hardened HD tracks with cast double-grouser track pad
    Components (2) Chain links connected by hardened pins and bushings Acoustic travel alarm HD fixed axle rollers and idlers
    Components (3) Postive Pin Retention (PPR2) sealed and greased track design Cast double-grouser combined pad-links with bushings connected by hardened full floating pins Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas
    Components (4) All running surfaces of sprockets, idlers, rollers and track chain links hardened All teeth contact areas of sprocket and pad links are hardened Acoustic travel alarm (forward and reverse)
    Components (5) Fully hydraulic self-adjusting track tensioning system with accumulator Fully hydraulic self-adjusting track tensioning system with membrane accumulator Fully hydraulic, self-adjusting track tensioning system with piston accumulator
    Components (6) Automatic hydraulic retarder valve to prevent overspeed on downhill travel Automatic hydraulic retarder valve to prevent over-speed on downhill travel Automatic hydraulic retarder valve to prevent over-speed on downhill travel
    Components (7) Audible travel alarm - -
    Travel Speed - 1st Stage - Maximum - 0.93 mile/h 0.68 mile/h
    Travel Speed - 2nd Stage - Maximum - 1.55 mile/h 0.99 mile/h
    Gradeability - Travel Drives - Maximum - 57 % 39 %
    Track Pads - Each Side - 42 42
    Bottom Rollers - Each Side - 7 7
    Support Rollers - Each Side - 2 plus a skid plate in between 2 plus a skid plate in between
    Travel Drives - Each Side - 1 planetary transmission with 2 two-stage axial piston motors 1 planetary transmission with 2 two-stage axial piston motors
    Parking Brake - Wet multiple disc brake, spring applied/hydraulically released -

    Operator's Cab
    Components (1) Pressurized operator station with positive filtration Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat Single hydraulically driven HVAC System, with dual system option
    Components (2) Heated cab mirror Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests In-floor window with removable grate
    Components (3) Sliding upper door window (left-hand cab door) Roller blinds at all windows Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
    Components (4) Glass-breaking safety hammer Windshield with parallel intermittent wiper/washer Independently adjustable seat consoles with integrated joysticks
    Components (5) Removable lower windshield with in cab storage bracket All-round safety glass, armored windshield and sliding side window Operator Protective Guard (Top Guard) (ISO 10262:1998)
    Components (6) Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM Operator Protective Guard (Top Guard) Elevated full-size trainer seat with safety belt and laptop desk
    Components (7) Beverage holder Single HVAC with option for Dual HVAC Additional fold-away auxiliary seat with safety belt
    Components (8) Literature holder Joystick controls integrated in independently adjustable seat consoles Operator Presence switch
    Components (9) AM/FM radio Fold-away auxiliary seat with safety belt Monitoring system with 254 mm (10 in) touch screen
    Components (10) Radio with MP3 auxiliary audio port External sun shields at side and rear windows Powered 45 degree access stairway
    Components (11) Two stereo speakers Sliding emergency ladder (kick-down type) with ladder cage Emergency egress ladder
    Components (12) Storage shelf suitable for lunch or toolbox Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated FM/AM radio with USB and AUX input
    Components (13) Color LCD display with warning, filter/fluid change, and working hour information Robust instrument panel including large colored BCS screen with transflective technology Roller blinds on 3 front windows
    Components (14) Adjustable armrest - 3 cup holders
    Components (15) Height-adjustable joystick consoles - Cat Electronic Technician service port
    Components (16) Neutral lever (lock out) for all controls - -
    Components (17) Travel control pedals with removable hand levers - -
    Components (18) Two power outlets, 10 amp (total) - -
    Components (19) Laminated glass front upper window and tempered other windows - -
    Operator's Eye Level - Approximately - 22.31 ft 24.91 ft
    Internal Dimensions of Cab - Length - 7.22 ft 7.33 ft
    Internal Dimensions of Cab - Width - 5.25 ft 5.33 ft
    Internal Dimensions of Cab - Height - 7.05 ft 6.75 ft
    Board Control System (BCS III) Features (1) - USB, Lan (TCP/IP) and CAN BUS interfaces for data export -
    Board Control System (BCS III) Features (2) - On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram) -
    Board Control System (BCS III) Features (3) - Robust instrument panel including large (12 in) colored touch screen for intuitive handling -
    Board Control System (BCS III) Features (4) - Electronic monitoring, data logging & diagnostic system for vital signs & service data of engines, hydraulic & lube systems -
    Board Control System (BCS III) Features (5) - On-screen troubleshooting assistance -
    Board Control System (BCS III) Features (6) - Graphic charts of logged data -
    Board Control System (BCS III) Features (7) - Fault memory with storage of related conditions -

    Automatic Lubrication System
    Capacity - Grease Barrel 18 gal (US) - -
    Type (1) Central bank lubrication system Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control adjust the pause/lube times Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
    Type (2) Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing System failures displayed by Board Control System System failures displayed by monitoring system
    Type (3) Standard grease reel on machine for bucket linkage Grease filters (200 µm) between service station and container, as well as directly behind grease pump Grease filters (200 µm) between service station and container as well as directly behind grease pump
    Type (4) Grease refill service point accessible from ground Connected to the lubrication system are: - pivot points of attachment, bucket and cylinders Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring
    Capacity - Grease Container - 188 gal (US) 188 gal (US)
    Type (5) - Connected to the lubrication system are: - raceways of the swing roller bearing - two greasing pinions for the internal gearing of the swing ring -

    Attachments
    Type (1) Boom and stick torsion-resistant with welded box design Inspection hole in monoboom BH Catwalks with rails at booms (FS and BH)
    Type (2) High-tensile steel with solid steel castings at pivot areas Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve Guards for shovel cylinders (FS)
    Type (3) Boom and stick stress-relieved after welding Special wear packages for highly abrasive materials on request Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
    Type (4) Float valve for boom down function Catwalks with rails at boom (FS and BH) Service access holes from both sides of boom (FS and BH) and stick (FS)
    Buckets Equipped With – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds - -
    All buckets (FS and BH) are equipped with a wear package consisting of: (1) - - Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
    All buckets (FS and BH) are equipped with a wear package consisting of: (2) - - Wing shrouds on side walls - Heel shrouds at bottom edges Wing shrouds on side walls and heel shrouds at bottom edges
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) - - Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) - - Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance
    Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) - - Constant boom momentum throughout the whole lift arc - Crowd force assistance Constant boom momentum throughout the entire lift arc; Crowd force assistance
    Type (5) - Welding procedures allow for internal counter-welding (double prep weld) wherever possible Welding procedures allow for internal counter-welding (double prep weld) wherever possible
    Type (6) - Boom and sticks are stress-relieved after welding Booms and sticks are stress-relieved after welding
    Type (7) - Boom and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel casting at pivot areas Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
    Type (8) - Guards for shovel cylinders (FS) Special wear packages for highly abrasive materials available upon request

    Backhoe Attachment (BH) - Working Range
    Maximum Digging Depth 26.3 ft - 29.17 ft
    Maximum Digging Reach 45.6 ft - 62.33 ft
    Maximum Digging Height 41.9 ft - 52.83 ft
    Maximum Dump Height 27.9 ft - -

    Backhoe Attachment (BH) - Digging Forces
    Bucket Digging Force - ISO 120947 lbf - 274840 lb
    Bucket Digging Force - SAE 112600 lbf - -
    Stick Digging Force - ISO 104761 lbf - 295740 lb
    Stick Digging Force - SAE 98800 lbf - -

    Backhoe Attachment (BH) - Backhoe
    Capacity 1:1 10.6 yd³ - -
    Total Width 8.8 ft - -
    Number of Teeth 5 - -
    Tooth System Cat C70 or M75 - -
    Weight - Including Standard Wear Package 18521 lb - -
    Maximum Material Density - Loose 3030 lb/yd³ - -

    Diesel Engines
    Number of Cylinders - Each Engine - 12 12
    Bore - 5.71 in 6.69 in
    Stroke - 6.38 in 8.46 in
    Displacement - 1959 in³ 3574 in³
    Aspiration - Turbocharged and air-to-air aftercooled Turbocharged and charge air-cooled
    Components (1) - Additional high-capacity water separator Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
    Components (2) - Two-stage fuel filter including water separator High-capacity water separator
    Components (3) - Heavy-duty air filters Two-stage fuel filter with series filtration
    Components (4) - Microprocessed engine management Heavy-duty air filters
    Components (5) - Hydraulically driven radiator fan with electronically controlled fan speed Microprocessed engine management
    Fuel Tank Capacity - 2098 gal (US) -
    Emissions - Meets U.S. EPA Tier 4 Final and EU Stage V emission standards -
    Rated Speed - - 1,800 min-1 (1,800 rpm)
    Components (6) - - Hydraulically driven radiator fan with electronically controlled fan speed
    Components (7) - - Exhaust manifold and turbo heat shields

    Electrical System - Diesel Drive
    System Voltage - 24V -
    Batteries in Series/Parallel Installation - 6 x 210 Ah - 12 V each; 630 Ah - 24 V in total -
    Components (1) - 6 maintenance-free batteries -
    Components (2) - Battery isolation relays and switches -
    Components (3) - Emergency stop switches accessible from ground level, in engine module and in operator's cab -
    Components (4) - 14 LED high-brightness working flood lights -
    Components (5) - 11 LED high-brightness service lights -

    Operating Weights
    6040 FS - Standard Track Pads - 3.9 ft -
    6040 FS - Operating Weight - 891980 lb -
    6040 FS - Ground Pressure - 24.1 N/cm2 (35.0 psi) -
    6040 - Standard Track Pads - 3.9 ft -
    6040 - Operating Weight - 897930 lb -
    6040 - Ground Pressure - 24.3 N/cm2 (35.3 psi) -
    Note - 1600 mm track pads available as option Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
    6040 FS - Note - Other track pads available on request -
    6060 FS - Standard Track Pads - - 4.58 ft
    6060 FS - Operating Weight - - 1320110 lb
    6060 FS - Ground Pressure - - 26.6 N/cm2 (38.5 psi)
    Backhoe - Standard Track Pads - - 4.58 ft
    Backhoe - Operating Weight - - 1323860 lb
    Backhoe - Ground Pressure - - 26.7 N/cm2 (38.7 psi)

    Hydraulic System with Pump Managing System
    Hydraulic Tank Capacity - Diesel Version - Approximately - 898 gal (US) -
    Total Volume of Hydraulic Oil - Diesel Version - Approximately - 1532 gal (US) -
    Main Pumps - Diesel Version - 4 x variable swash plate pumps 8 variable swash plate pumps
    Main Pumps - Maximum Oil Flow - Diesel Version - 4 x 724 L/min (4 x 191 gal/min) 8 x 650 L/min (8 x 172 gal/min)
    Maximum Pressure - Attachment - 4350 psi 4640 psi
    Maximum Pressure - Travel - 5080 psi 5220 psi
    Swing Pumps - Diesel Version - 4 x reversible swash plate pump 4 reversible swash plate pumps
    Swing Pumps - Maximum Oil Flow - Diesel Version - 4 x 321 L/min (4 x 85 gal/min) 4 x 352 L/min (4 x 93 gal/min)
    Maximum Pressure - Swing Pumps - 5080 psi 5075 psi

    Hydraulic Oil Cooling
    Diameter - Fan - 2 × 1524 mm (2 × 60 in) 46 in
    Oil Flow of Cooling Pumps - Diesel Version - 2 x 799 L/min (2 x 211 gal/min) -
    Features (1) - Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
    Features (2) - Fan speed is thermostatically controlled Fan speed and flow of oil to the coolers are thermostatically controlled
    Features (3) - Extremely high cooling efficiency to ensure optimum oil temperature Extremely high cooling efficiency to ensure optimum oil temperature
    Components (1) - Gear type cooling pumps supplying high-volume, low-pressure oil to aluminum coolers -
    Components (2) - Variable axial piston pumps supplying low-volume, high-pressure oil to fans -
    Oil Flow of Cooling Pumps - - 4 x 488 L/min (4 x 129 gal/min)
    Components - - 4 cooling fans
    Features (4) - - Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers

    Bucket
    Bucket Capacity - Backhoe (heaped 1:1) - 28.8 yd³ -
    Bucket Capacity - Face Shovel (heaped 2:1) - 28.8 yd³ -

    Retractable Service Station
    Installation - Retractable service station installed underneath the engine module and easily accessible from ground Retractable service station installed underneath the engine module and easily accessible from ground.
    Equipped With (1) - - Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container
    Equipped With (2) - - Cat jump-start socket
    Equipped With (3) - - Indicator lights

    Diesel Engine - Lesser Regulated
    Gross Power - SAE J1995 - - 3025 HP
    Net Power - ISO 9249 - - 2990 HP
    Net Power - SAE J1349 - - 2821 HP
    Emissions - - Optimized for fuel consumption.

    Diesel Engine - Highly Regulated
    Gross Power - SAE J1995 - - 3015 HP
    Net Power - SAE J1349 - - 2810 HP
    Net Power - ISO 9249 - - 2979 HP
    Emissions - - Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.

    Digging Forces
    Maximum Crowd Force - - 494410 lb
    Maximum Breakout Force - - 388780 lb

    Working Ranges
    Maximum Digging Height - - 51.17 ft
    Maximum Digging Reach - - 54.17 ft
    Maximum Digging Depth - - 9.17 ft

    Standard Bucket Capacity
    Face Shovel (heaped 2:1) - - 44.5 yd³
    Backhoe (heaped 1:1) - - 44.5 yd³
    Add a Similar Product:
    • 6020B Hydraulic Shovel Add
    • 6030 Hydraulic Shovel Add