Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.
Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions.
-
Engine - U.S. EPA Tier 4 Final
Engine Model
Cat® C27
-
-
Gross Power - SAE J1995
824 HP
-
-
Net Power - SAE J1349
746 HP
-
-
Engine - Cat C27 with Tier 4 Final Emission Standards
Number of Cylinders
12
-
-
Bore
5.4 in
-
-
Stroke
6 in
-
-
Displacement
1648 in³
-
-
Engine - Equivalent to U.S. EPA Tier 2
Engine Model
Cat® C27
-
-
Gross Power - SAE J1995
839 HP
-
-
Net Power - SAE J1349
746 HP
-
-
Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards
Number of Cylinders
12
-
-
Bore
5.4 in
-
-
Stroke
6 in
-
-
Displacement
1648 in³
-
-
Aspiration
Turbocharged and air-to-air aftercooled
-
-
Operating Weights - Backhoe
Operating Weight
154 ton (US)
-
-
Weights
Ground Pressure
23.6 psi
-
-
Note
Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants
-
-
Operating Weight
308000 lb
-
-
Track
Standard
28 in
-
-
Wide
36 in
-
-
Extra Wide
39 in
-
-
Number of Shoes - Each Side
46
-
-
Number of Track Rollers - Each Side
9
-
-
Number of Carrier Rollers - Each Side
3
-
-
Track Pads
Double grouser
-
-
Drive
Travel Speed - Two Stages - 1st Stage - Maximum
1.4 mile/h
-
-
Travel Speed - Two Stages - 2nd Stage - Maximum
2.1 mile/h
-
-
Maximum Drawbar Pull - Forward
192886 lbf
-
-
Maximum Drawbar Pull - Reverse
220987 lbf
-
-
Gradeability - Travel Drives
Approximately 42%
-
-
Hydraulic Track Tensioning
With accumulator
-
-
Maximum Drawbar Pull
179847 lbf
-
-
Service Refill Capacities
Fuel Tank
449 gal (US)
-
-
Cooling System
44 gal (US)
-
-
Engine Oil
23 gal (US)
-
-
Swing Drive
2.4 gal (US)
-
-
Hydraulic System - Including Tank
463 gal (US)
-
-
Hydraulic Tank
253 gal (US)
-
-
Grease Tank
18 gal (US)
-
-
Electrical System
System Voltage
24 V
-
-
Batteries
4 × 200 Ah (12 V each)
4 maintenance-free batteries
-
Alternator Rating
150 A (24 V) in total
-
-
Components (1)
Emergency stop in cabin, engine module, pump room and on service station accessible from ground level
-
-
Components (2)
Four maintenance free batteries
-
-
Components (3)
Lockable battery isolation switch
-
-
Components (5)
14 LED high-brightness working lights
-
-
Components (4)
5 LED service lights
-
-
Components (6)
2 electric horns
-
-
Components (7)
Two (2) lights for rear end
-
-
Components (9)
One (1) beacon light on cabin roof
-
-
Components (8)
One (1) light for machine deck/service
-
-
Hydraulic System
Main Pumps
3 × variable swash plate pumps
-
-
Main Pumps - Maximum Total Oil Flow
407 gal/min
-
-
Main Pumps - Maximum Pressure - Attachment
4641 psi
-
-
Pilot Pump
1 × gear pump
-
-
Pilot Pump - Maximum Flow, Pilot
40.4 gal/min
-
-
Pilot Pump - Maximum Pressure, Pilot
1378 psi
-
-
Main Pumps - Maximum Pressure - Travel
4641 psi
-
-
Swing Pump
1 × variable swash plate pump
-
-
Engine Fan Pump - Maximum Flow, Engine Fan
53.1 gal/min
-
-
Engine Fan Pump - Maximum Pressure, Engine Fan
3191 psi
-
-
Engine Fan Pump
1 × variable swash plate pump
-
-
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan
22.7 gal/min
-
-
Swing Pump - Maximum Flow - Swing
127 gal/min
-
-
Hydraulic Fan Pump
1 × variable swash plate pump
-
-
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan
1958 psi
-
-
Swing Pump - Maximum Pressure - Swing
5294 psi
-
-
Hydraulic Oil Cooling - Maximum Flow
284 gal/min
-
-
Hydraulic Oil Cooling - Diameter of Fan
40 in
-
-
Filters (1)
Full-flow high-pressure filters (200 μm) for main pumps
-
-
Filters (2)
Full-flow filters (20 μm) for complete return circuit
-
-
Filters (3)
Pressure filters (16 μm) for servo circuit
-
-
Filters (4)
Full-flow filters (6 μm) for engine cooling return circuit
-
-
Filters (5)
Swing charge filter (15 μm)
-
-
Filters (6)
Pump case return screens (125 μm)
-
-
Swing System
Swing Drive
Two (2) compact planetary transmissions with axial piston motors
2 compact planetary transmissions with axial piston motors
-
Parking Brake
Wet multiple disc brake, spring-loaded/hydraulically released
-
-
Maximum Swing Speed
4.9 r/min
-
-
Swing Ring
Cross roller bearing with sealed internal gearing
Triple-race roller bearing with sealed internal gearing
-
Features (1)
Closed-loop swing circuit with speed control
-
-
Features (2)
Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
-
-
Features (3)
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
-
-
Parking Brakes
-
Wet multiple-disc brake, spring-loaded/hydraulically released
-
Maximum Swing Speed - Diesel Version
-
4.6 r/min
-
Maximum Swing Speed - AC Version
-
5 r/min
-
Engine
Emissions
U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1
-
-
Centralized Service Area
Feature
Accessible from ground level
-
-
Equipped With (1)
Emergency stop
-
-
Equipped With (2)
Quick couplings for: Diesel fuel and Grease
-
-
Undercarriage
Travel Speed - Two Stages - 1st Stage - Maximum
1.6 mile/h
-
-
Travel Speed - Two Stages - 2nd Stage - Maximum
2.3 mile/h
-
-
Maximum Drawbar Pull - Forward
192886 lbf
-
-
Maximum Tractive Force
197157 lbf
360144 ft·lbf
-
Maximum Drawbar Pull - Reverse
220987 lbf
-
-
Gradeability - Travel Drives
38°/78% (SAE J1309)
-
-
Hydraulic Track Tensioning
With accumulator
-
-
Number of Shoes - Each Side
46
-
-
Number of Track Rollers - Each Side
9
-
-
Number of Carrier Rollers - Each Side
3
-
-
Components (1)
Forged double-grouser track pads
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
-
Components (2)
Chain links connected by hardened pins and bushings
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
-
Components (3)
Postive Pin Retention (PPR2) sealed and greased track design
Fully hydraulic self-adjusting track tensioning system with membrane accumulator
-
Components (4)
All running surfaces of sprockets, idlers, rollers and track chain links hardened
Automatic hydraulic retarder valve to prevent over-speed on downhill travel
-
Components (5)
Fully hydraulic self-adjusting track tensioning system with accumulator
Acoustic travel alarm
-
Components (6)
Automatic hydraulic retarder valve to prevent overspeed on downhill travel
-
-
Components (7)
Audible travel alarm
-
-
Travel Speed - 1st Stage - Maximum
-
0.87 mile/h
-
Travel Speed - 2nd Stage - Maximum
-
1.68 mile/h
-
Gradeability - Travel Drives - Approximate
-
47 %
-
Track Pads - Each Side
-
44
-
Bottom Rollers - Each Side
-
7
-
Support Rollers - Each Side
-
2 plus a skid plate in between
-
Travel Drives - Each Side
-
1 planetary transmission with 2 two-stage axial piston motors
-
Parking Brakes
-
Wet multiple disc brake, spring loaded/hydraulically released
-
Operator's Cab
Components (1)
Pressurized operator station with positive filtration
Under roof mounted heating ventilating and air conditioning system
-
Components (2)
Heated cab mirror
External sun shields at side and rear windows
-
Components (3)
Sliding upper door window (left-hand cab door)
Robust instrument panel including large colored BCS screen with transflective technology
-
Components (4)
Glass-breaking safety hammer
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
-
Components (5)
Removable lower windshield with in cab storage bracket
Hydraulically operated 45 degree access stairway
-
Components (6)
Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM
Emergency egress ladder with ladder cage
-
Components (7)
Beverage holder
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
-
Components (8)
Literature holder
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
-
Components (9)
AM/FM radio
Roller blinds at all windows
-
Components (10)
Radio with MP3 auxiliary audio port
Windshield with parallel intermittent wiper/washer
-
Components (11)
Two stereo speakers
All-round safety glass, armored windshield and sliding side window
-
Components (12)
Storage shelf suitable for lunch or toolbox
Operator Protective Guards (ISO 10262:1998 Level II
-
Components (13)
Color LCD display with warning, filter/fluid change, and working hour information
Joystick controls integrated in independently adjustable seat consoles
-
Components (14)
Adjustable armrest
Fold-away auxiliary seat with safety belt
-
Components (15)
Height-adjustable joystick consoles
-
-
Components (16)
Neutral lever (lock out) for all controls
-
-
Components (17)
Travel control pedals with removable hand levers
-
-
Components (18)
Two power outlets, 10 amp (total)
-
-
Components (19)
Laminated glass front upper window and tempered other windows
-
-
Operator's Eye Level - Approximately
-
21.33 ft
-
Internal Dimensions of Cab - Length
-
7.22 ft
-
Internal Dimensions of Cab - Width
-
5.25 ft
-
Internal Dimensions of Cab - Height
-
7.05 ft
-
Automatic Lubrication System
Capacity - Grease Barrel
18 gal (US)
-
-
Type (1)
Central bank lubrication system
Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
-
Type (2)
Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing
Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
-
Type (3)
Standard grease reel on machine for bucket linkage
Lubricated pinion for greasing of internal gearing of swing ring
-
Type (4)
Grease refill service point accessible from ground
System failures displayed by Board Control System
-
Capacity - Grease Container
-
119 gal (US)
-
Type (5)
-
Grease filters between service station and container as well as directly behind grease pump
-
Attachments
Type (1)
Boom and stick torsion-resistant with welded box design
Catwalks with rails at booms
-
Type (2)
High-tensile steel with solid steel castings at pivot areas
Special wear packages for highly abrasive materials on request
-
Type (3)
Boom and stick stress-relieved after welding
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
-
Type (4)
Float valve for boom down function
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
-
Buckets Equipped With
– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds
-
-
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
-
Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
-
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
-
Constant boom momentum throughout the whole lift arc and crowd force assistance
-
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
-
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
-
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
-
Wing shrouds on side walls and heel shrouds at bottom edges
-
Type (5)
-
Booms and sticks are stress-relieved after welding
-
Type (6)
-
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas
-
Backhoe Attachment (BH) - Working Range
Maximum Digging Depth
26.3 ft
-
-
Maximum Digging Reach
45.6 ft
-
-
Maximum Digging Height
41.9 ft
-
-
Maximum Dump Height
27.9 ft
-
-
Backhoe Attachment (BH) - Digging Forces
Bucket Digging Force - ISO
120947 lbf
-
-
Bucket Digging Force - SAE
112600 lbf
-
-
Stick Digging Force - ISO
104761 lbf
-
-
Stick Digging Force - SAE
98800 lbf
-
-
Backhoe Attachment (BH) - Backhoe
Capacity 1:1
10.6 yd³
-
-
Total Width
8.8 ft
-
-
Number of Teeth
5
-
-
Tooth System
Cat C70 or M75
-
-
Weight - Including Standard Wear Package
18521 lb
-
-
Maximum Material Density - Loose
3030 lb/yd³
-
-
Diesel Engine - Highly Regulated
Gross Power - SAE J1995
-
1649 HP
-
Net Power - ISO 9249
-
1625 HP
-
Net Power - SAE J1349
-
1541 HP
-
Emissions
-
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
-
Diesel Engine - Lesser Regulated
Gross Power - SAE J1995
-
1531 HP
-
Net Power - SAE J1349
-
1425 HP
-
Net Power - ISO 9249
-
1511 HP
-
Emissions
-
Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2
-
Diesel Engines
Number of Cylinders - Each Engine
-
12
-
Bore
-
5.42 in
-
Stroke
-
6 in
-
Displacement
-
1648 in³
-
Aspiration
-
Turbocharged and air-to-air aftercooled
-
Components (1)
-
Hydraulically driven radiator fan with electronically controlled fan speed
-
Components (2)
-
Micro processed engine management
-
Components (3)
-
Heavy-duty air filters
-
Components (4)
-
Two-stage fuel filter, including water separator
-
Components (5)
-
Additional high-capacity water separator
-
Emissions
-
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
-
Fuel Tank Capacity
-
1342 gal (US)
-
Electrical System - Diesel Drive
System Voltage
-
24V
-
Batteries in Series/Parallel Installation
-
4 x 210 Ah at 12V each; 420 Ah with 24V in total
-
Components (1)
-
Battery isolation relays
-
Components (2)
-
Emergency stop switches accessible from ground level and in engine module
-
Components (3)
-
14 LED high-brightness working flood lights
-
Components (4)
-
11 LED service lights
-
Operating Weights
6030 FS - Standard Track Pads
-
3.25 ft
-
6030 FS - Operating Weight
-
657640 lb
-
6030 FS - Ground Pressure
-
32.2 psi
-
6030 - Standard Track Pads
-
3.25 ft
-
6030 - Operating Weight
-
660060 lb
-
6030 - Ground Pressure
-
32.3 psi
-
Note
-
Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants.