|
|
|
6060 Hydraulic Mining Shovel
|
General |
Engine Output - SAE J1995 |
824 HP |
1649 HP |
3015 HP |
Bucket Payload |
16.1 ton (US) |
33 ton (US) |
67 ton (US) |
Operating Weight |
154.3 ton (US) |
324 ton (US) |
660 ton (US) |
Note |
Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available. |
Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions. |
Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available. |
Engine - U.S. EPA Tier 4 Final |
Engine Model |
Cat® C27 |
- |
- |
Gross Power - SAE J1995 |
824 HP |
- |
- |
Net Power - SAE J1349 |
746 HP |
- |
- |
Engine - Cat C27 with Tier 4 Final Emission Standards |
Number of Cylinders |
12 |
- |
- |
Bore |
5.4 in |
- |
- |
Stroke |
6 in |
- |
- |
Displacement |
1648 in³ |
- |
- |
Engine - Equivalent to U.S. EPA Tier 2 |
Engine Model |
Cat® C27 |
- |
- |
Gross Power - SAE J1995 |
839 HP |
- |
- |
Net Power - SAE J1349 |
746 HP |
- |
- |
Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards |
Number of Cylinders |
12 |
- |
- |
Bore |
5.4 in |
- |
- |
Stroke |
6 in |
- |
- |
Displacement |
1648 in³ |
- |
- |
Aspiration |
Turbocharged and air-to-air aftercooled |
- |
- |
Operating Weights - Backhoe |
Operating Weight |
154 ton (US) |
- |
- |
Weights |
Ground Pressure |
23.6 psi |
- |
- |
Note |
Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants |
- |
- |
Operating Weight |
308000 lb |
- |
- |
Track |
Standard |
28 in |
- |
- |
Wide |
36 in |
- |
- |
Extra Wide |
39 in |
- |
- |
Number of Shoes - Each Side |
46 |
- |
- |
Number of Track Rollers - Each Side |
9 |
- |
- |
Number of Carrier Rollers - Each Side |
3 |
- |
- |
Track Pads |
Double grouser |
- |
- |
Drive |
Travel Speed - Two Stages - 1st Stage - Maximum |
1.4 mile/h |
- |
- |
Travel Speed - Two Stages - 2nd Stage - Maximum |
2.1 mile/h |
- |
- |
Maximum Drawbar Pull - Forward |
192886 lbf |
- |
- |
Maximum Drawbar Pull - Reverse |
220987 lbf |
- |
- |
Gradeability - Travel Drives |
Approximately 42% |
- |
- |
Hydraulic Track Tensioning |
With accumulator |
- |
- |
Maximum Drawbar Pull |
179847 lbf |
- |
- |
Service Refill Capacities |
Fuel Tank |
449 gal (US) |
- |
3136 gal (US) |
Cooling System |
44 gal (US) |
- |
211.4 gal (US) |
Engine Oil |
23 gal (US) |
- |
86.6 gal (US) |
Swing Drive |
2.4 gal (US) |
- |
42.4 gal (US) |
Hydraulic System - Including Tank |
463 gal (US) |
- |
2483 gal (US) |
Hydraulic Tank |
253 gal (US) |
- |
1876 gal (US) |
Grease Tank |
18 gal (US) |
- |
188 gal (US) |
Electrical System |
System Voltage |
24 V |
- |
24 V |
Batteries |
4 × 200 Ah (12 V each) |
4 maintenance-free batteries |
- |
Alternator Rating |
150 A (24 V) in total |
- |
- |
Components (1) |
Emergency stop in cabin, engine module, pump room and on service station accessible from ground level |
- |
6 maintenance-free batteries |
Components (2) |
Four maintenance free batteries |
- |
Lockable battery isolator switch |
Components (3) |
Lockable battery isolation switch |
- |
Lockable starter isolator switch |
Components (5) |
14 LED high-brightness working lights |
- |
17 LED service lights |
Components (4) |
5 LED service lights |
- |
13 LED high-brightness working flood lights |
Components (6) |
2 electric horns |
- |
2 electric horns (1 cab module; 1 oil cooler module) |
Components (7) |
Two (2) lights for rear end |
- |
- |
Components (9) |
One (1) beacon light on cabin roof |
- |
- |
Components (8) |
One (1) light for machine deck/service |
- |
- |
Batteries in Series/Parallel Installation |
- |
- |
6 x 210 Ah; 12 V each; 630 Ah 24 V in total |
Hydraulic System |
Main Pumps |
3 × variable swash plate pumps |
- |
- |
Main Pumps - Maximum Total Oil Flow |
407 gal/min |
- |
- |
Main Pumps - Maximum Pressure - Attachment |
4641 psi |
- |
- |
Pilot Pump |
1 × gear pump |
- |
- |
Pilot Pump - Maximum Flow, Pilot |
40.4 gal/min |
- |
- |
Pilot Pump - Maximum Pressure, Pilot |
1378 psi |
- |
- |
Main Pumps - Maximum Pressure - Travel |
4641 psi |
- |
- |
Swing Pump |
1 × variable swash plate pump |
- |
- |
Engine Fan Pump - Maximum Flow, Engine Fan |
53.1 gal/min |
- |
- |
Engine Fan Pump - Maximum Pressure, Engine Fan |
3191 psi |
- |
- |
Engine Fan Pump |
1 × variable swash plate pump |
- |
- |
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan |
22.7 gal/min |
- |
- |
Swing Pump - Maximum Flow - Swing |
127 gal/min |
- |
- |
Hydraulic Fan Pump |
1 × variable swash plate pump |
- |
- |
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan |
1958 psi |
- |
- |
Swing Pump - Maximum Pressure - Swing |
5294 psi |
- |
- |
Hydraulic Oil Cooling - Maximum Flow |
284 gal/min |
- |
- |
Hydraulic Oil Cooling - Diameter of Fan |
40 in |
- |
- |
Filters (1) |
Full-flow high-pressure filters (200 μm) for main pumps |
- |
- |
Filters (2) |
Full-flow filters (20 μm) for complete return circuit |
- |
- |
Filters (3) |
Pressure filters (16 μm) for servo circuit |
- |
- |
Filters (4) |
Full-flow filters (6 μm) for engine cooling return circuit |
- |
- |
Filters (5) |
Swing charge filter (15 μm) |
- |
- |
Filters (6) |
Pump case return screens (125 μm) |
- |
- |
Swing System |
Swing Drive |
Two (2) compact planetary transmissions with axial piston motors |
2 compact planetary transmissions with axial piston motors |
4 compact planetary transmissions with axial piston motors |
Parking Brake |
Wet multiple disc brake, spring-loaded/hydraulically released |
- |
- |
Maximum Swing Speed |
4.9 r/min |
- |
3.8 r/min |
Swing Ring |
Cross roller bearing with sealed internal gearing |
Triple-race roller bearing with sealed internal gearing |
Triple-race roller bearing with sealed internal gearing |
Features (1) |
Closed-loop swing circuit with speed control |
- |
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody |
Features (2) |
Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking |
- |
Closed-loop swing circuit with torque control |
Features (3) |
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system |
- |
Hydraulic braking of the swing motion by counteracting control |
Parking Brakes |
- |
Wet multiple-disc brake, spring-loaded/hydraulically released |
Wet multiple disc brake, spring loaded/hydraulically released |
Maximum Swing Speed - Diesel Version |
- |
4.6 r/min |
- |
Maximum Swing Speed - AC Version |
- |
5 r/min |
- |
Features (4) |
- |
- |
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system |
Engine |
Emissions |
U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1 |
- |
- |
Engine Model |
- |
- |
2 x Cat 3512E |
Centralized Service Area |
Feature |
Accessible from ground level |
- |
- |
Equipped With (1) |
Emergency stop |
- |
- |
Equipped With (2) |
Quick couplings for: Diesel fuel and Grease |
- |
- |
Undercarriage |
Travel Speed - Two Stages - 1st Stage - Maximum |
1.6 mile/h |
- |
- |
Travel Speed - Two Stages - 2nd Stage - Maximum |
2.3 mile/h |
- |
- |
Maximum Drawbar Pull - Forward |
192886 lbf |
- |
- |
Maximum Tractive Force |
197157 lbf |
360144 ft·lbf |
661160 lb |
Maximum Drawbar Pull - Reverse |
220987 lbf |
- |
- |
Gradeability - Travel Drives |
38°/78% (SAE J1309) |
- |
- |
Hydraulic Track Tensioning |
With accumulator |
- |
- |
Number of Shoes - Each Side |
46 |
- |
- |
Number of Track Rollers - Each Side |
9 |
- |
- |
Number of Carrier Rollers - Each Side |
3 |
- |
- |
Components (1) |
Forged double-grouser track pads |
All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened |
HD tracks with cast double-grouser track pad |
Components (2) |
Chain links connected by hardened pins and bushings |
Cast double-grouser combined pad-links with bushings connected by hardened full floating pins |
HD fixed axle rollers and idlers |
Components (3) |
Postive Pin Retention (PPR2) sealed and greased track design |
Fully hydraulic self-adjusting track tensioning system with membrane accumulator |
Hardened running surfaces of sprockets, idlers, rollers, pad links, and teeth contact areas |
Components (4) |
All running surfaces of sprockets, idlers, rollers and track chain links hardened |
Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
Acoustic travel alarm (forward and reverse) |
Components (5) |
Fully hydraulic self-adjusting track tensioning system with accumulator |
Acoustic travel alarm |
Fully hydraulic, self-adjusting track tensioning system with piston accumulator |
Components (6) |
Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
- |
Automatic hydraulic retarder valve to prevent over-speed on downhill travel |
Components (7) |
Audible travel alarm |
- |
- |
Travel Speed - 1st Stage - Maximum |
- |
0.87 mile/h |
0.68 mile/h |
Travel Speed - 2nd Stage - Maximum |
- |
1.68 mile/h |
0.99 mile/h |
Gradeability - Travel Drives - Approximate |
- |
47 % |
- |
Track Pads - Each Side |
- |
44 |
42 |
Bottom Rollers - Each Side |
- |
7 |
7 |
Support Rollers - Each Side |
- |
2 plus a skid plate in between |
2 plus a skid plate in between |
Travel Drives - Each Side |
- |
1 planetary transmission with 2 two-stage axial piston motors |
1 planetary transmission with 2 two-stage axial piston motors |
Parking Brakes |
- |
Wet multiple disc brake, spring loaded/hydraulically released |
- |
Gradeability - Travel Drives - Maximum |
- |
- |
39 % |
Operator's Cab |
Components (1) |
Pressurized operator station with positive filtration |
Under roof mounted heating ventilating and air conditioning system |
Single hydraulically driven HVAC System, with dual system option |
Components (2) |
Heated cab mirror |
External sun shields at side and rear windows |
In-floor window with removable grate |
Components (3) |
Sliding upper door window (left-hand cab door) |
Robust instrument panel including large colored BCS screen with transflective technology |
Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support |
Components (4) |
Glass-breaking safety hammer |
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system |
Independently adjustable seat consoles with integrated joysticks |
Components (5) |
Removable lower windshield with in cab storage bracket |
Hydraulically operated 45 degree access stairway |
Operator Protective Guard (Top Guard) (ISO 10262:1998) |
Components (6) |
Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM |
Emergency egress ladder with ladder cage |
Elevated full-size trainer seat with safety belt and laptop desk |
Components (7) |
Beverage holder |
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat |
Additional fold-away auxiliary seat with safety belt |
Components (8) |
Literature holder |
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests |
Operator Presence switch |
Components (9) |
AM/FM radio |
Roller blinds at all windows |
Monitoring system with 254 mm (10 in) touch screen |
Components (10) |
Radio with MP3 auxiliary audio port |
Windshield with parallel intermittent wiper/washer |
Powered 45 degree access stairway |
Components (11) |
Two stereo speakers |
All-round safety glass, armored windshield and sliding side window |
Emergency egress ladder |
Components (12) |
Storage shelf suitable for lunch or toolbox |
Operator Protective Guards (ISO 10262:1998 Level II |
FM/AM radio with USB and AUX input |
Components (13) |
Color LCD display with warning, filter/fluid change, and working hour information |
Joystick controls integrated in independently adjustable seat consoles |
Roller blinds on 3 front windows |
Components (14) |
Adjustable armrest |
Fold-away auxiliary seat with safety belt |
3 cup holders |
Components (15) |
Height-adjustable joystick consoles |
- |
Cat Electronic Technician service port |
Components (16) |
Neutral lever (lock out) for all controls |
- |
- |
Components (17) |
Travel control pedals with removable hand levers |
- |
- |
Components (18) |
Two power outlets, 10 amp (total) |
- |
- |
Components (19) |
Laminated glass front upper window and tempered other windows |
- |
- |
Operator's Eye Level - Approximately |
- |
21.33 ft |
24.91 ft |
Internal Dimensions of Cab - Length |
- |
7.22 ft |
7.33 ft |
Internal Dimensions of Cab - Width |
- |
5.25 ft |
5.33 ft |
Internal Dimensions of Cab - Height |
- |
7.05 ft |
6.75 ft |
Automatic Lubrication System |
Capacity - Grease Barrel |
18 gal (US) |
- |
- |
Type (1) |
Central bank lubrication system |
Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times |
Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times |
Type (2) |
Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing |
Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders |
System failures displayed by monitoring system |
Type (3) |
Standard grease reel on machine for bucket linkage |
Lubricated pinion for greasing of internal gearing of swing ring |
Grease filters (200 µm) between service station and container as well as directly behind grease pump |
Type (4) |
Grease refill service point accessible from ground |
System failures displayed by Board Control System |
Main lube system connections include: pivot points of attachment, bucket and cylinders, raceways of swing roller bearing, and 2 greasing pinions for the internal gearing of swing ring |
Capacity - Grease Container |
- |
119 gal (US) |
188 gal (US) |
Type (5) |
- |
Grease filters between service station and container as well as directly behind grease pump |
- |
Attachments |
Type (1) |
Boom and stick torsion-resistant with welded box design |
Catwalks with rails at booms |
Catwalks with rails at booms (FS and BH) |
Type (2) |
High-tensile steel with solid steel castings at pivot areas |
Special wear packages for highly abrasive materials on request |
Guards for shovel cylinders (FS) |
Type (3) |
Boom and stick stress-relieved after welding |
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve |
Type (4) |
Float valve for boom down function |
Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
Service access holes from both sides of boom (FS and BH) and stick (FS) |
Buckets Equipped With |
– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds |
- |
- |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) |
- |
Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces |
Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) |
- |
Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance |
Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance |
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) |
- |
Constant boom momentum throughout the whole lift arc and crowd force assistance |
Constant boom momentum throughout the entire lift arc; Crowd force assistance |
All buckets (FS and BH) are equipped with a wear package consisting of: (1) |
- |
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth |
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth |
All buckets (FS and BH) are equipped with a wear package consisting of: (2) |
- |
Wing shrouds on side walls and heel shrouds at bottom edges |
Wing shrouds on side walls and heel shrouds at bottom edges |
Type (5) |
- |
Booms and sticks are stress-relieved after welding |
Welding procedures allow for internal counter-welding (double prep weld) wherever possible |
Type (6) |
- |
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas |
Booms and sticks are stress-relieved after welding |
Type (7) |
- |
- |
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas |
Type (8) |
- |
- |
Special wear packages for highly abrasive materials available upon request |
Backhoe Attachment (BH) - Working Range |
Maximum Digging Depth |
26.3 ft |
- |
29.17 ft |
Maximum Digging Reach |
45.6 ft |
- |
62.33 ft |
Maximum Digging Height |
41.9 ft |
- |
52.83 ft |
Maximum Dump Height |
27.9 ft |
- |
- |
Backhoe Attachment (BH) - Digging Forces |
Bucket Digging Force - ISO |
120947 lbf |
- |
274840 lb |
Bucket Digging Force - SAE |
112600 lbf |
- |
- |
Stick Digging Force - ISO |
104761 lbf |
- |
295740 lb |
Stick Digging Force - SAE |
98800 lbf |
- |
- |
Backhoe Attachment (BH) - Backhoe |
Capacity 1:1 |
10.6 yd³ |
- |
- |
Total Width |
8.8 ft |
- |
- |
Number of Teeth |
5 |
- |
- |
Tooth System |
Cat C70 or M75 |
- |
- |
Weight - Including Standard Wear Package |
18521 lb |
- |
- |
Maximum Material Density - Loose |
3030 lb/yd³ |
- |
- |
Diesel Engine - Highly Regulated |
Gross Power - SAE J1995 |
- |
1649 HP |
3015 HP |
Net Power - ISO 9249 |
- |
1625 HP |
2979 HP |
Net Power - SAE J1349 |
- |
1541 HP |
2810 HP |
Emissions |
- |
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards |
Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions. |
Diesel Engine - Lesser Regulated |
Gross Power - SAE J1995 |
- |
1531 HP |
3025 HP |
Net Power - SAE J1349 |
- |
1425 HP |
2821 HP |
Net Power - ISO 9249 |
- |
1511 HP |
2990 HP |
Emissions |
- |
Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2 |
Optimized for fuel consumption. |
Diesel Engines |
Number of Cylinders - Each Engine |
- |
12 |
12 |
Bore |
- |
5.42 in |
6.69 in |
Stroke |
- |
6 in |
8.46 in |
Displacement |
- |
1648 in³ |
3574 in³ |
Aspiration |
- |
Turbocharged and air-to-air aftercooled |
Turbocharged and charge air-cooled |
Components (1) |
- |
Hydraulically driven radiator fan with electronically controlled fan speed |
Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs) |
Components (2) |
- |
Micro processed engine management |
High-capacity water separator |
Components (3) |
- |
Heavy-duty air filters |
Two-stage fuel filter with series filtration |
Components (4) |
- |
Two-stage fuel filter, including water separator |
Heavy-duty air filters |
Components (5) |
- |
Additional high-capacity water separator |
Microprocessed engine management |
Emissions |
- |
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards |
- |
Fuel Tank Capacity |
- |
1342 gal (US) |
- |
Rated Speed |
- |
- |
1,800 min-1 (1,800 rpm) |
Components (6) |
- |
- |
Hydraulically driven radiator fan with electronically controlled fan speed |
Components (7) |
- |
- |
Exhaust manifold and turbo heat shields |
Electrical System - Diesel Drive |
System Voltage |
- |
24V |
- |
Batteries in Series/Parallel Installation |
- |
4 x 210 Ah at 12V each; 420 Ah with 24V in total |
- |
Components (1) |
- |
Battery isolation relays |
- |
Components (2) |
- |
Emergency stop switches accessible from ground level and in engine module |
- |
Components (3) |
- |
14 LED high-brightness working flood lights |
- |
Components (4) |
- |
11 LED service lights |
- |
Operating Weights |
6030 FS - Standard Track Pads |
- |
3.25 ft |
- |
6030 FS - Operating Weight |
- |
657640 lb |
- |
6030 FS - Ground Pressure |
- |
32.2 psi |
- |
6030 - Standard Track Pads |
- |
3.25 ft |
- |
6030 - Operating Weight |
- |
660060 lb |
- |
6030 - Ground Pressure |
- |
32.3 psi |
- |
Note |
- |
Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants. |
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants. |
6060 FS - Standard Track Pads |
- |
- |
4.58 ft |
6060 FS - Operating Weight |
- |
- |
1320110 lb |
6060 FS - Ground Pressure |
- |
- |
26.6 N/cm2 (38.5 psi) |
Backhoe - Standard Track Pads |
- |
- |
4.58 ft |
Backhoe - Operating Weight |
- |
- |
1323860 lb |
Backhoe - Ground Pressure |
- |
- |
26.7 N/cm2 (38.7 psi) |
Hydraulic System with Pump Managing System |
Hydraulic Tank Capacity - Approximately |
- |
707 gal (US) |
- |
Total Volume of Hydraulic Oil - Approximately |
- |
925 gal (US) |
- |
Main Pumps |
- |
4 x variable swash plate pumps |
- |
Main Pumps - Maximum Oil Flow - Diesel Version |
- |
4 x 552 L/min (4 x 146 gal/min) |
8 x 650 L/min (8 x 172 gal/min) |
Maximum Pressure - Attachment |
- |
4495 psi |
4640 psi |
Maximum Pressure - Travel |
- |
5220 psi |
5220 psi |
Swing Pumps |
- |
2 x reversible swash plate double pumps |
- |
Swing Pumps - Maximum Oil Flow - Diesel Version |
- |
4 x 197 L/min (4 x 52 gal/min) |
4 x 352 L/min (4 x 93 gal/min) |
Maximum Pressure - Swing Pumps |
- |
5076 psi |
5075 psi |
Main Pumps - Diesel Version |
- |
- |
8 variable swash plate pumps |
Swing Pumps - Diesel Version |
- |
- |
4 reversible swash plate pumps |
Hydraulic Oil Cooling |
Oil Flow of Cooling Pumps - Diesel Version |
- |
2 x 467 L/min (2 x 123 gal/min) |
- |
Diameter - Fan |
- |
48 in |
46 in |
Oil Flow of Cooling Pumps |
- |
- |
4 x 488 L/min (4 x 129 gal/min) |
Components |
- |
- |
4 cooling fans |
Features (1) |
- |
- |
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running |
Features (2) |
- |
- |
Fan speed and flow of oil to the coolers are thermostatically controlled |
Features (3) |
- |
- |
Extremely high cooling efficiency to ensure optimum oil temperature |
Features (4) |
- |
- |
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers |
Bucket |
Bucket Capacity - Face Shovel (heaped 2:1) |
- |
21.6 yd³ |
- |
Bucket Capacity - Backhoe (heaped 1:1) |
- |
22.2 yd³ |
- |
Digging Forces |
Maximum Crowd Force |
- |
291700 ft·lbf |
494410 lb |
Maximum Tearout Force |
- |
212150 ft·lbf |
- |
Maximum Breakout Force |
- |
- |
388780 lb |
Working Ranges |
Maximum Digging Height |
- |
- |
51.17 ft |
Maximum Digging Reach |
- |
- |
54.17 ft |
Maximum Digging Depth |
- |
- |
9.17 ft |
Standard Bucket Capacity |
Face Shovel (heaped 2:1) |
- |
- |
44.5 yd³ |
Backhoe (heaped 1:1) |
- |
- |
44.5 yd³ |
Retractable Service Station |
Installation |
- |
- |
Retractable service station installed underneath the engine module and easily accessible from ground. |
Equipped With (1) |
- |
- |
Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container |
Equipped With (2) |
- |
- |
Cat jump-start socket |
Equipped With (3) |
- |
- |
Indicator lights |