|
|
|
|
Engine |
Net Power - EEC 80/1269 |
535 HP |
- |
250 HP |
Bore |
5.4 in |
5.1 in |
4.5 in |
Stroke |
6 in |
6.2 in |
5.9 in |
Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
- |
Note (3) |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Note (2) |
Optimized VHP Plus is standard for the 24. |
Optimized VHP Plus is standard for the 14M3. |
- |
Standard Capability |
122 °F |
122 °F |
109 °F |
Emissions |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
U.S. EPA Tier 4 Final/EU Stage V |
Note (4) |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
- |
Engine Model |
Cat C27 |
Cat C13 |
Cat C9.3 |
Displacement |
1648 in³ |
763 in³ |
567.5 in³ |
Number of Cylinders |
12 |
6 |
6 |
Base Power (1st Gear) - Net |
- |
238 HP |
- |
Speed at Rated Power |
- |
1,850 rpm |
- |
Torque Rise |
- |
41% |
- |
Maximum Altitude - Full Power |
- |
13900 ft |
- |
Maximum Torque - VHP Plus |
- |
1137 lb/ft |
- |
Maximum Altitude - Full Power (Tier 3) |
- |
14349 ft |
- |
Maximum Altitude - Full Power (Tier 2) |
- |
12049 ft |
- |
Standard - Fan Speed - Minimum |
- |
550 rpm |
- |
Note (5) |
- |
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
- |
Standard - Fan Speed - Maximum |
- |
1,600 rpm |
- |
Net Power - ISO 9249/SAE J1349 |
- |
- |
250 HP |
Engine RPM |
- |
- |
2,000 |
Torque Rise - ISO 9294 |
- |
- |
44% |
Weights |
Operating Weight - Typically Equipped |
165314 lb |
57250 lb |
20236 lb |
Gross Vehicle Weight - Base* - Total |
- |
50980 lb |
- |
Gross Vehicle Weight - Base* - Front Axle |
- |
13994 lb |
- |
Gross Vehicle Weight - Typically Equipped - Total |
- |
57250 lb |
- |
Gross Vehicle Weight - Typically Equipped - Rear Axle |
- |
42005 lb |
- |
Gross Vehicle Weight - Typically Equipped - Front Axle |
- |
15245 lb |
- |
Gross Vehicle Weight - Base* - Rear Axle |
- |
36994 lb |
- |
Note |
- |
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
- |
Moldboard |
Blade Width |
24 ft |
14 ft |
12 ft |
Blade Height |
40 in |
- |
- |
Arc Radius |
- |
16.3 in |
16.3 in |
Throat Clearance |
- |
4.6 in |
6.5 in |
Blade Width - With End Bits |
- |
169 in |
- |
Blade Height - With Cutting Edge |
- |
24.9 in |
- |
Blade Width - Without End Bits |
- |
164 in |
- |
Blade Height - Without Cutting Edge |
- |
23 in |
- |
Cutting Edge |
- |
- |
6 in |
End Bit |
- |
- |
6 in |
Blade Range |
Maximum Depth of Cut |
21.7 in |
23.3 in |
28.9 in |
Maximum Lift Above Ground |
16.1 in |
16.5 in |
18.9 in |
Circle Centershift - Left |
- |
25.6 in |
- |
Circle Centershift - Right |
- |
20.5 in |
- |
Blade Tip Range - Backward |
- |
5° |
- |
Maximum Shoulder Reach Outside of Tires - Right |
- |
78.9 in |
- |
Moldboard Sideshift - Right |
- |
31.1 in |
- |
Moldboard Sideshift - Left |
- |
29.1 in |
- |
Maximum Shoulder Reach Outside of Tires - Left |
- |
73.6 in |
- |
Blade Tip Range - Forward |
- |
40° |
- |
Machine Weight |
Weight* |
161695 lb |
- |
42325 lb |
Note |
- |
- |
*Typically equipped with push block and ripper. |
All-Wheel Drive (AWD) Weight |
- |
- |
44613 lb |
Frame |
Circle - Outer Diameter |
- |
71.7 in |
- |
Front Axle - Wheel Lean - Left/Right |
- |
17.1° |
- |
Front Axle - Total Oscillation per Side |
- |
32° |
- |
Service Refill Capacities |
Transmission and Differential |
- |
23.5 gal (US) |
- |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
5.8 gal (US) |
- |
Hydraulic System |
- |
33 gal (US) |
- |
Circle Drive |
- |
1.8 gal (US) |
- |
Cooling System |
- |
15.9 gal (US) |
- |
Fuel Tank |
- |
109.9 gal (US) |
- |
Air Conditioning System |
Air Conditioning |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
- |
Dimensions |
Basic Blade Width |
- |
- |
140 in |
Length of Machine* |
- |
- |
397.6 in |
Width |
- |
- |
97.6 in |
Note |
- |
- |
*Typically equipped with push block and ripper. |
Maximum Height |
- |
- |
132 in |
Service Refill |
Hydraulic System |
- |
- |
14.5 gal (US) |
Engine Crankcase |
- |
- |
7.9 gal (US) |
Circle Drive |
- |
- |
1.8 gal (US) |
Fuel Tank |
- |
- |
100 gal (US) |
Front Wheel Spindle Bearing - Each |
- |
- |
0.13 gal (US) |