Compare Equipment Go Back

24 Motor Grader
140 Motor Grader LVR

Engine

Net Power - EEC 80/1269 535 HP 250 HP -
Bore 5.4 in 4.5 in -
Stroke 6 in 5.9 in -
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - -
Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
Note (2) Optimized VHP Plus is standard for the 24. - -
Standard Capability 122 °F 109 °F -
Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V -
Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - -
Engine Model Cat C27 Cat C9.3 -
Displacement 1648 in³ 567.5 in³ -
Number of Cylinders 12 6 -
Net Power - ISO 9249/SAE J1349 - 250 HP -
Engine RPM - 2,000 -
Torque Rise - ISO 9294 - 44% -

Machine Weight

Weight* 161695 lb 42325 lb -
Note - *Typically equipped with push block and ripper. -
All-Wheel Drive (AWD) Weight - 44613 lb -

Weights

Operating Weight - Typically Equipped 165314 lb 20236 lb -

Moldboard

Blade Width 24 ft 12 ft -
Blade Height 40 in - -
Cutting Edge - 6 in -
Arc Radius - 16.3 in -
Throat Clearance - 6.5 in -
End Bit - 6 in -

Blade Range

Maximum Depth of Cut 21.7 in 28.9 in -
Maximum Lift Above Ground 16.1 in 18.9 in -

Dimensions

Basic Blade Width - 140 in -
Length of Machine* - 397.6 in -
Width - 97.6 in -
Note - *Typically equipped with push block and ripper. -
Maximum Height - 132 in -

Service Refill

Hydraulic System - 14.5 gal (US) -
Engine Crankcase - 7.9 gal (US) -
Circle Drive - 1.8 gal (US) -
Fuel Tank - 100 gal (US) -
Front Wheel Spindle Bearing - Each - 0.13 gal (US) -
Add a Similar Product: