|
|
120 - 2019 - N Am, Global
|
|
Engine |
| Net Power - EEC 80/1269 |
535 HP |
- |
250 HP |
| Bore |
5.4 in |
4.1 in |
4.5 in |
| Stroke |
6 in |
5.3 in |
5.9 in |
| Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
- |
| Note (3) |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Power as declared per ISO 14396 |
- |
| Note (2) |
Optimized VHP Plus is standard for the 24. |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
| Standard Capability |
122 °F |
122 °F |
109 °F |
| Emissions |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
U.S. EPA Tier 4 Final/EU Stage V |
| Note (4) |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
- |
- |
| Engine Model |
Cat C27 |
Cat 7.1 |
Cat C9.3 |
| Displacement |
1648 in³ |
427.8 in³ |
567.5 in³ |
| Number of Cylinders |
12 |
6 |
6 |
| Derating Altitude |
- |
9842.5 ft |
- |
| Maximum Torque - ISO 9249 |
- |
606 lb/ft |
- |
| All-Wheel Drive Net Power Range (Tier 3) |
- |
130 HP |
- |
| Net Power Range (Tier 3) |
- |
130 HP |
- |
| Engine RPM |
- |
2,000 |
2,000 |
| Maximum Torque - AWD On |
- |
611 lb/ft |
- |
| Derating Altitude (AWD) |
- |
5499 ft |
- |
| Torque Rise - ISO 9294 |
- |
42% |
44% |
| Net Power - ISO 9249/SAE J1349 |
- |
- |
250 HP |
Weights |
| Operating Weight - Typically Equipped |
165314 lb |
35067 lb |
20236 lb |
Moldboard |
| Blade Width |
24 ft |
12 ft |
12 ft |
| Blade Height |
40 in |
24 in |
- |
| Throat Clearance |
- |
4.1 in |
6.5 in |
| End Bit |
- |
6 in |
6 in |
| Cutting Edge |
- |
6 in |
6 in |
| Arc Radius |
- |
16.3 in |
16.3 in |
Blade Range |
| Maximum Depth of Cut |
21.7 in |
30.5 in |
28.9 in |
| Maximum Lift Above Ground |
16.1 in |
16.1 in |
18.9 in |
| Blade Tip Range Forward |
- |
40 |
- |
| Maximum Shoulder Reach Right |
- |
76 in |
- |
| Moldboard Side Shift Right |
- |
26.1 in |
- |
| Maximum Shoulder Reach Left |
- |
69.4 in |
- |
| Moldboard Side Shift Left |
- |
20.1 in |
- |
| Circle Center Shift Left |
- |
26 in |
- |
| Blade Tip Range Backward |
- |
5 |
- |
| Circle Center Shift Right |
- |
26 in |
- |
Machine Weight |
| Weight* |
161695 lb |
- |
42325 lb |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 |
- |
36731 lb |
- |
| Note (1) |
- |
*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
- |
| Joystick Weight* Tier 4 |
- |
35358 lb |
- |
| Joystick All-Wheel Drive (AWD) Weight* Tier 4 |
- |
36846 lb |
- |
| Lever/Steering Wheel Weight* Tier 4 |
- |
35067 lb |
- |
| Note |
- |
- |
*Typically equipped with push block and ripper. |
| All-Wheel Drive (AWD) Weight |
- |
- |
44613 lb |
Service Refill Capacities |
| Transmission and Differential |
- |
9 gal (US) |
- |
| Circle Drive |
- |
1.8 gal (US) |
- |
| Fuel Tank |
- |
65 gal (US) |
- |
| Cooling System |
- |
14 gal (US) |
- |
| Engine Crankcase |
- |
4.8 gal (US) |
- |
| Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
5 gal (US) |
- |
| Hydraulic System |
- |
25.6 gal (US) |
- |
Air Conditioning System |
| Note |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. |
- |
Dimensions |
| Maximum Height |
- |
136.4 in |
132 in |
| Length of Machine* |
- |
387 in |
397.6 in |
| Width All Wheel Drive (AWD) |
- |
2551 mm |
- |
| Width |
- |
102 in |
97.6 in |
| Note |
- |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
| Basic Blade Width |
- |
12 ft |
140 in |
Service Refill |
| Hydraulic System |
- |
- |
14.5 gal (US) |
| Engine Crankcase |
- |
- |
7.9 gal (US) |
| Circle Drive |
- |
- |
1.8 gal (US) |
| Fuel Tank |
- |
- |
100 gal (US) |
| Front Wheel Spindle Bearing - Each |
- |
- |
0.13 gal (US) |
