Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
-
Note (3)
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Power as declared per ISO 14396
-
Note (2)
Optimized VHP Plus is standard for the 24.
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
Standard Capability
122 °F
122 °F
-
Emissions
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
-
Note (4)
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
-
Joystick Weight* Tier 4
-
35358 lb
-
Joystick All-Wheel Drive (AWD) Weight* Tier 4
-
36846 lb
-
Weights
Operating Weight - Typically Equipped
165314 lb
16271 lb
-
Moldboard
Blade Width
24 ft
12 ft
-
Blade Height
40 in
24 in
-
Throat Clearance
-
4.1 in
-
Arc Radius
-
16.3 in
-
End Bit
-
6 in
-
Cutting Edge
-
6 in
-
Blade Range
Maximum Depth of Cut
21.7 in
30.5 in
-
Maximum Lift Above Ground
16.1 in
16.1 in
-
Blade Tip Range Forward
-
40
-
Maximum Shoulder Reach Right
-
76 in
-
Moldboard Side Shift Right
-
26.1 in
-
Maximum Shoulder Reach Left
-
69.4 in
-
Moldboard Side Shift Left
-
20.1 in
-
Circle Center Shift Left
-
26 in
-
Blade Tip Range Backward
-
5
-
Circle Center Shift Right
-
26 in
-
Dimensions
Basic Blade Width
-
12 ft
-
Maximum Height
-
136.4 in
-
Length of Machine*
-
387 in
-
Width All Wheel Drive (AWD)
-
2551 mm
-
Width
-
102 in
-
Note
-
*Typically equipped with push block and ripper.
-
Service Refill Capacities
Transmission and Differential
-
9 gal (US)
-
Circle Drive
-
1.8 gal (US)
-
Fuel Tank
-
65 gal (US)
-
Cooling System
-
14 gal (US)
-
Engine Crankcase
-
4.8 gal (US)
-
Diesel Exhaust Fluid Tank (Tier 4 Only)
-
5 gal (US)
-
Hydraulic System
-
25.6 gal (US)
-
Air Conditioning System
Note
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.
