Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Standard Capability
122 °F
-
-
Note (2)
Optimized VHP Plus is standard for the 14M3.
-
-
Torque Rise
41%
-
-
Maximum Altitude - Full Power
13900 ft
-
-
Maximum Torque - VHP Plus
1137 lb/ft
-
-
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
-
-
Maximum Altitude - Full Power (Tier 3)
14349 ft
-
-
Maximum Altitude - Full Power (Tier 2)
12049 ft
-
-
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
-
-
Standard - Fan Speed - Minimum
550 rpm
550 rpm
-
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
-
-
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005 lb
-
-
Gross Vehicle Weight - Typically Equipped - Front Axle
15245 lb
-
-
Gross Vehicle Weight - Base* - Rear Axle
36994 lb
-
-
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
-
-
Moldboard
Blade Width
14 ft
16 ft
-
Arc Radius
16.3 in
16.3 in
-
Throat Clearance
4.6 in
5 in
-
Blade Width - With End Bits
169 in
-
-
Blade Height - With Cutting Edge
24.9 in
-
-
Blade Width - Without End Bits
164 in
-
-
Blade Height - Without Cutting Edge
23 in
-
-
Note
-
*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
-
Thickness
-
1 in
-
End Bit - Width
-
6 in
-
Blade Pull* - Base GVW
-
41039 lb
-
Cutting Edge Width
-
8 in
-
Cutting Edge Thickness
-
1 in
-
Down Force - Maximum GVW
-
43861 lb
-
Height
-
31 in
-
Width
-
16 ft
-
Down Force - Base GVW
-
30743 lb
-
Blade Pull* - Maximum GVW
-
52878 lb
-
End Bit - Thickness
-
0.75 in
-
Blade Range
Maximum Depth of Cut
23.3 in
18.5 in
-
Circle Centershift - Left
25.6 in
27.2 in
-
Maximum Lift Above Ground
16.5 in
15.7 in
-
Circle Centershift - Right
20.5 in
22 in
-
Blade Tip Range - Backward
5°
5°
-
Maximum Shoulder Reach Outside of Tires - Right
78.9 in
91 in
-
Moldboard Sideshift - Right
31.1 in
31.1 in
-
Moldboard Sideshift - Left
29.1 in
29.1 in
-
Maximum Shoulder Reach Outside of Tires - Left
73.6 in
91 in
-
Blade Tip Range - Forward
40°
40°
-
Maximum Blade Position Angle
-
65°
-
Frame
Circle - Outer Diameter
71.7 in
-
-
Front Axle - Wheel Lean - Left/Right
17.1°
-
-
Front Axle - Total Oscillation per Side
32°
35°
-
Front Frame Structure - Height
-
18.1 in
-
Front Frame Structure - Width
-
14 in
-
Drawbar - Width
-
3 in
-
Drawbar - Height
-
8 in
-
Circle - Diameter
-
71.7 in
-
Circle - Blade Beam Thickness
-
2 in
-
Front Frame Structure - Thickness
-
0.6 in
-
Front Axle - Wheel Lean
-
18° Left/17° Right
-
Front Axle - Height to Center
-
26.4 in
-
Service Refill Capacities
Transmission and Differential
23.5 gal (US)
-
-
Diesel Exhaust Fluid Tank (Tier 4 Only)
5.8 gal (US)
-
-
Hydraulic System
33 gal (US)
-
-
Circle Drive
1.8 gal (US)
-
-
Cooling System
15.9 gal (US)
-
-
Fuel Tank
109.9 gal (US)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con
Gross Vehicle Weight - Typically Equipped - Rear Axle
-
52201 lb
-
Gross Vehicle Weight - Typically Equipped - Total
-
71454 lb
-
Gross Vehicle Weight - Maximum Tested - Front Axle
-
26125 lb
-
Gross Vehicle Weight - Typically Equipped - Front Axle
-
19253 lb
-
Gross Vehicle Weight - Maximum Tested - Rear Axle
-
58753 lb
-
Gross Vehicle Weight - Base** - Front Axle
-
17932 lb
-
Gross Vehicle Weight - Base** - Rear Axle
-
45596 lb
-
Note (1)
-
*For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
-
Note (2)
-
**Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
-
Dimensions (Approximate)
Ground Clearance - Rear Axle
-
15.6 in
-
Length - Counterweight to Ripper
-
474.4 in
-
Length - Front Axle to Moldboard
-
120.7 in
-
Length - Front Axle to Mid Tandem
-
290 in
-
Height - Top of Cylinders
-
121.6 in
-
Width - Tire Center Lines
-
106.4 in
-
Width - Outside Rear Tires
-
134.3 in
-
Length - Between Tandem Axles
-
72.5 in
-
Height - Top of Cab
-
146.4 in
-
Width - Outside Front Tires
-
134.3 in
-
Height - Front Axle Center
-
28.9 in
-
Length - Front Tire to Rear of Machine - Including Tow Hitch
-
417 in
-
Height - Exhaust Stack
-
140 in
-
Standards
Steering
-
ISO 5010:2007
-
Brakes
-
ISO 3450:2011
-
Sound
-
ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
-
ROPS/FOPS
-
ISO 3471:2008/ISO 3449:2005
-
Note (1)
-
The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
-
Note (2)
-
The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
-
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
