Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
-
Engine Model
Cat 7.1
Cat C13
-
Engine RPM
2,200
-
-
Standard Capability
109 °F
122 °F
-
High - Ambient Capability
122 °F
-
-
Maximum Torque - ISO 9249
616 lb/ft
-
-
Stroke
5.3 in
6.2 in
-
Torque Rise - ISO 9294
40%
-
-
Number of Cylinders
6
6
-
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
-
Note (2)
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Optimized VHP Plus is standard for the 14M3.
-
Note (3)
Power as declared per ISO 14396
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
Engine Power AWD (ISO 14396)
196 HP
-
-
Base Power (1st Gear) - Net
-
238 HP
-
Speed at Rated Power
-
1,850 rpm
-
Torque Rise
-
41%
-
Maximum Altitude - Full Power
-
13900 ft
-
Maximum Torque - VHP Plus
-
1137 lb/ft
-
Maximum Altitude - Full Power (Tier 3)
-
14349 ft
-
Maximum Altitude - Full Power (Tier 2)
-
12049 ft
-
Standard - Fan Speed - Minimum
-
550 rpm
-
Note (4)
-
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
-
Note (5)
-
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
Standard - Fan Speed - Maximum
-
1,600 rpm
-
Weights
Operating Weight - Typically Equipped
38912 lb
57250 lb
-
Note
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
-
Gross Vehicle Weight - Base* - Total
-
50980 lb
-
Gross Vehicle Weight - Base* - Front Axle
-
13994 lb
-
Gross Vehicle Weight - Typically Equipped - Total
-
57250 lb
-
Gross Vehicle Weight - Typically Equipped - Rear Axle
-
42005 lb
-
Gross Vehicle Weight - Typically Equipped - Front Axle
-
15245 lb
-
Gross Vehicle Weight - Base* - Rear Axle
-
36994 lb
-
Moldboard
Blade Width
12 ft
14 ft
-
Arc Radius
16.3 in
16.3 in
-
Blade Height
24 in
-
-
Cutting Edge Width
6 in
-
-
End Bit
6 in
-
-
Throat Clearance
4.4 in
4.6 in
-
Blade Width - With End Bits
-
169 in
-
Blade Height - With Cutting Edge
-
24.9 in
-
Blade Width - Without End Bits
-
164 in
-
Blade Height - Without Cutting Edge
-
23 in
-
Air Conditioning System
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
-
-
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).