CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 GC Motor Grader
    View Product
    14 Motor Grader
    View Product Remove
    140/140 AWD Motor Grader
    View Product Remove

    Engine
    Engine Power (ISO 14396) 196 HP - -
    Bore 4.1 in 5.1 in 4.5 in
    Derating Altitude 9842 ft - 10000 ft
    Displacement 427.8 in³ 763 in³ 567.5 in³
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat 7.1 Cat C13 Cat® C9.3
    Engine RPM 2,200 - -
    Standard Capability 109 °F 122 °F 109 °F
    High - Ambient Capability 122 °F - 122 °F
    Maximum Torque - ISO 9249 616 lb/ft - -
    Stroke 5.3 in 6.2 in 5.9 in
    Torque Rise - ISO 9294 40% - -
    Number of Cylinders 6 6 6
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Optimized VHP Plus is standard for the 14M3. -
    Note (3) Power as declared per ISO 14396 Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Engine Power AWD (ISO 14396) 196 HP - -
    Base Power (1st Gear) - Net - 238 HP -
    Speed at Rated Power - 1,850 rpm 2,000 rpm
    Torque Rise - 41% 38%
    Maximum Altitude - Full Power - 13900 ft -
    Maximum Torque - VHP Plus - 1137 lb/ft 840 lb/ft
    Maximum Altitude - Full Power (Tier 3) - 14349 ft -
    Maximum Altitude - Full Power (Tier 2) - 12049 ft -
    Standard - Fan Speed - Minimum - 550 rpm -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) -
    Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. -
    Standard - Fan Speed - Maximum - 1,600 rpm -
    Net Power Range (Tier 4) - - 179 HP
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 200 HP
    VHP Plus - Gear - Net Power - Forward 2nd - - 189 HP
    VHP Plus - Gear - Net Power - Forward 5th - - 215 HP
    VHP Plus - Gear - Net Power - Forward 3rd - - 200 HP
    VHP Plus - Gear - Net Power - Forward 8th - - 231 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - - 189 HP
    VHP Plus - Gear - Net Power - Forward 1st - - 179 HP
    VHP Plus - Gear - Net Power - Forward 6th - - 220 HP
    VHP Plus - Gear - Net Power - Reverse 1st - - 179 HP
    VHP Plus Range - Net - - 133-172 kW (179-231 hp)
    VHP Plus - Gear - Net Power - Forward 7th - - 225 HP
    VHP Plus Range - Net - Metric - - 133-172 kW (181-234 hp)
    VHP Plus - Gear - Net Power - Forward 4th - - 210 HP
    Base Power (1st Gear) - Net - Metric - - 181 HP
    High Ambient - Fan Speed - Standard - - 1,400 rpm
    High Ambient - Fan Speed - Maximum - - 1,550 rpm
    High Ambient - Fan Speed - Minimum - - 500 rpm

    Weights
    Operating Weight - Typically Equipped 38912 lb 57250 lb 42647 lb
    Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. -
    Gross Vehicle Weight - Base* - Total - 50980 lb -
    Gross Vehicle Weight - Base* - Front Axle - 13994 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 57250 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 15245 lb -
    Gross Vehicle Weight - Base* - Rear Axle - 36994 lb -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb
    Operating Weight - Typically Equipped - Front Axle - - 12055 lb
    Operating Weight - Typically Equipped - Rear Axle - - 30592 lb
    Gross Vehicle Weight - Base - Front Axle - - 9343 lb
    Gross Vehicle Weight - Base - Rear Axle - - 28077 lb
    Gross Vehicle Weight - Maximum - Total - - 55144 lb
    Gross Vehicle Weight - Base - Total - - 37420 lb
    Operating Weight - Typically Equipped - Total - - 42647 lb

    Moldboard
    Blade Width 12 ft 14 ft 12 ft
    Arc Radius 16.3 in 16.3 in 16.3 in
    Blade Height 24 in - -
    Cutting Edge Width 6 in - 6 in
    End Bit 6 in - -
    Throat Clearance 4.4 in 4.6 in 6.5 in
    Blade Width - With End Bits - 169 in -
    Blade Height - With Cutting Edge - 24.9 in -
    Blade Width - Without End Bits - 164 in -
    Blade Height - Without Cutting Edge - 23 in -
    Moldboard - Height - - 24 in
    Moldboard - Thickness - - 0.87 in
    Cutting Edge Thickness - - 0.6 in
    End Bit - Width - - 6 in
    End Bit - Thickness - - 0.6 in
    Blade Pull - Base GVW - - 25269 lb
    Blade Pull - Maximum GVW - - 34262 lb
    Blade Down Pressure - Base GVW - - 16038 lb
    Blade Down Pressure - Maximum GVW - - 29309 lb
    Moldboard - Blade Width - - 12 ft

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. - -
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). -

    Dimensions
    Width All Wheel Drive (AWD) 99.3 in - -
    Length of Machine* 406.7 in - -
    Maximum Height 132.4 in - -
    Width 95.6 in - -
    Note *Typically equipped with push block and ripper. - -
    Height - Top of Cab - - 130 in
    Length - Counterweight to Ripper - - 399 in
    Width - Outside Front Tires - - 98.9 in
    Length - Front Axle to Mid Tandem - - 241 in
    Length - Front Tire to Rear of Machine - - 351 in
    Length - Front Axle to Moldboard - - 100 in
    Length - Between Tandem Axles - - 60 in
    Width - Outside Rear Tires - - 98.9 in
    Width - Tire Center Lines - - 84.3 in
    Height - Front Axle Center - - 23.5 in
    Height - Exhaust Stack - - 128 in
    Height - Top of Cylinders - - 120 in
    Ground Clearance - Rear Axle - - 13.3 in

    Blade Range
    Circle Center Shift Left 29.6 in - -
    Circle Center Shift Right 28.7 in - -
    Maximum Depth of Cut 28.1 in 23.3 in 28.1 in
    Maximum Lift Above Ground 18.7 in 16.5 in 18.9 in
    Maximum Shoulder Reach Left 74.3 in - -
    Maximum Shoulder Reach Right 71.3 in - -
    Moldboard Side Shift Left 25.6 in - -
    Moldboard Side Shift Right 20.7 in - -
    Blade Tip Range Backward 5 - -
    Blade Tip Range Forward 40 - -
    Circle Centershift - Left - 25.6 in 27.4 in
    Circle Centershift - Right - 20.5 in 28.7 in
    Blade Tip Range - Backward - 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right - 78.9 in 77.9 in
    Moldboard Sideshift - Right - 31.1 in 26 in
    Moldboard Sideshift - Left - 29.1 in 20.1 in
    Maximum Shoulder Reach Outside of Tires - Left - 73.6 in 70.5 in
    Blade Tip Range - Forward - 40° 40°
    Maximum Blade Position Angle - - 90°

    Service Refill Capacities
    Fuel Tank 78 gal (US) 109.9 gal (US) -
    Circle Drive with Slip Clutch 2 gal (US) - -
    Circle Drive without Slip Clutch 0.5 gal (US) - -
    Cooling System 40 l 15.9 gal (US) -
    Engine Crankcase 5.5 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) 5.8 gal (US) -
    Hydraulic System 11.9 gal (US) 33 gal (US) -
    Transmission 4.8 gal (US) - -
    Transmission and Differential - 23.5 gal (US) -
    Circle Drive - 1.8 gal (US) -

    Weight
    Weight (Tier 4 Final)** 40488 lb - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - -
    All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - -
    Weight (Stage V)* 38912 lb - -

    Frame
    Circle - Outer Diameter - 71.7 in -
    Front Axle - Wheel Lean - Left/Right - 17.1° 18°
    Front Axle - Total Oscillation per Side - 32° 32°
    Drawbar - Width - - 3 in
    Circle - Diameter - - 60.2 in
    Circle - Blade Beam Thickness - - 1.6 in
    Drawbar - Height - - 6 in
    Front Frame Structure - Height - - 12.6 in
    Circle - Height - - 5.4 in
    Front Frame Structure - Width - - 12 in
    Drawbar - Thickness - - 0.5 in
    Front-Top/Bottom Plate - Width - - 12 in
    Front-Top/Bottom Plate - Thickness - - 0.87 in
    Front Axle - Height to Center - - 23.5 in

    Operating Specifications
    Top Speed - Forward - - 29 mile/h
    Top Speed - Reverse - - 23 mile/h
    Turning Radius - Outside Front Tires - - 25.59 ft
    Steering Range - Left/Right - - 50°
    Articulation Angle - Left/Right - - 20°
    Forward - 1st - - 2.5 mile/h
    Forward - 2nd - - 3.4 mile/h
    Forward - 3rd - - 5 mile/h
    Forward - 4th - - 6.9 mile/h
    Forward - 5th - - 10.6 mile/h
    Forward - 6th - - 14.5 mile/h
    Forward - 7th - - 19.9 mile/h
    Forward - 8th - - 29 mile/h
    Reverse - 1st - - 2 mile/h
    Reverse - 2nd - - 3.7 mile/h
    Reverse - 3rd - - 5.4 mile/h
    Reverse - 4th - - 8.4 mile/h
    Reverse - 5th - - 15.7 mile/h
    Reverse - 6th - - 23 mile/h

    Service Refill
    Fuel Capacity - - 104 gal (US)
    Cooling System - - 15 gal (US)
    Hydraulic System - Total - - 26.4 gal (US)
    Hydraulic System - Tank - - 16.9 gal (US)
    Diesel Exhaust Fluid - - 5.8 gal (US)
    Transmission - Differential - Final Drives - - 18.5 gal (US)
    Engine Oil - - 7.9 gal (US)
    Tandem Housing - Each - - 20 gal (US)
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US)
    Circle Drive Housing - - 1.8 gal (US)

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse
    Transmission - - APECS, Direct Drive, Powershift
    Brakes - Service - - Multiple Oil Disc
    Brakes - Service - Surface Area - - 3565 in²
    Brakes - Parking - - Multiple Oil Disc
    Brakes - Secondary - - Dual Circuit

    Hydraulic System
    Circuit Type - - Parallel
    Pump Type - - Variable Piston
    Pump Output - - 55.7 gal/min
    Maximum System Pressure - - 3500 psi
    Reservoir Tank Capacity - - 16.9 gal (US)
    Standby Pressure - - 885 psi

    Ripper
    Ripping Depth - Maximum - - 16.8 in
    Ripper Shank Holder Spacing - - 21 in
    Ripper Shank Holders - - 5
    Penetration Force - - 20812 lb
    Pry-Out Force - - 27794 lb
    Machine Length Increase, Beam Raised - - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in
    Mid, V-Type - Scarifier Shank Holders - - 11
    Rear - Scarifying Depth, Maximum - - 16.8 in
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in
    Front, V-Type - Working Width - - 47.4 in
    Mid, V-Type - Working Width - - 46.6 in
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May
    Rear - Working Width - - 84 in
    Rear - Scarifier Shank Holders - - 9
    Rear - Scarifier Shank Holder Spacing - - 10.5 in

    Standards
    Brakes - - ISO 3450
    Sound - - ISO 6394; ISO 6395
    Steering - - ISO 5010
    ROPS/FOPS - - ISO 3471/ISO 3449

    Tandems
    Height - - 19.9 in
    Width - - 7.9 in
    Sidewall Thickness - Inner - - 0.63 in
    Sidewall Thickness - Outer - - 0.71 in
    Drive Chain Pitch - - 2 in
    Wheel Axle Spacing - - 60 in
    Tandem Oscillation - Front Up - - 15°
    Tandem Oscillation - Front Down - - 25°
    Add a Similar Product: