CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    14 Motor Grader
    View Product Remove
    140 GC Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - -
    Net Power - ISO 9249/SAE J1349 250 HP - -
    Standard Capability 109 °F 122 °F 109 °F
    Engine RPM 2,000 - 2,200
    Engine Model Cat C9.3 Cat C13 Cat 7.1
    Bore 4.5 in 5.1 in 4.1 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V
    Displacement 567.5 in³ 763 in³ 427.8 in³
    Stroke 5.9 in 6.2 in 5.3 in
    Number of Cylinders 6 6 6
    Torque Rise - ISO 9294 44% - 40%
    Base Power (1st Gear) - Net - 238 HP -
    Speed at Rated Power - 1,850 rpm -
    Note (3) - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Power as declared per ISO 14396
    Note (2) - Optimized VHP Plus is standard for the 14M3. Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Torque Rise - 41% -
    Maximum Altitude - Full Power - 13900 ft -
    Maximum Torque - VHP Plus - 1137 lb/ft -
    Maximum Altitude - Full Power (Tier 3) - 14349 ft -
    Maximum Altitude - Full Power (Tier 2) - 12049 ft -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
    Standard - Fan Speed - Minimum - 550 rpm -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) -
    Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. -
    Standard - Fan Speed - Maximum - 1,600 rpm -
    Engine Power (ISO 14396) - - 196 HP
    Derating Altitude - - 9842 ft
    High - Ambient Capability - - 122 °F
    Maximum Torque - ISO 9249 - - 616 lb/ft
    Engine Power AWD (ISO 14396) - - 196 HP

    Weights
    Operating Weight - Typically Equipped 20236 lb 57250 lb 38912 lb
    Gross Vehicle Weight - Base* - Total - 50980 lb -
    Gross Vehicle Weight - Base* - Front Axle - 13994 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 57250 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 15245 lb -
    Gross Vehicle Weight - Base* - Rear Axle - 36994 lb -
    Note - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

    Moldboard
    Blade Width 12 ft 14 ft 12 ft
    Cutting Edge 6 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.6 in 4.4 in
    End Bit 6 in - 6 in
    Blade Width - With End Bits - 169 in -
    Blade Height - With Cutting Edge - 24.9 in -
    Blade Width - Without End Bits - 164 in -
    Blade Height - Without Cutting Edge - 23 in -
    Blade Height - - 24 in
    Cutting Edge Width - - 6 in

    Dimensions
    Basic Blade Width 140 in - -
    Length of Machine* 397.6 in - 406.7 in
    Width 97.6 in - 95.6 in
    Note *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper.
    Maximum Height 132 in - 132.4 in
    Width All Wheel Drive (AWD) - - 99.3 in

    Service Refill
    Hydraulic System 14.5 gal (US) - -
    Engine Crankcase 7.9 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Fuel Tank 100 gal (US) - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - -

    Machine Weight
    Note *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight 44613 lb - -
    Weight* 42325 lb - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 16.5 in 18.7 in
    Maximum Depth of Cut 28.9 in 23.3 in 28.1 in
    Circle Centershift - Left - 25.6 in -
    Circle Centershift - Right - 20.5 in -
    Blade Tip Range - Backward - 5° -
    Maximum Shoulder Reach Outside of Tires - Right - 78.9 in -
    Moldboard Sideshift - Right - 31.1 in -
    Moldboard Sideshift - Left - 29.1 in -
    Maximum Shoulder Reach Outside of Tires - Left - 73.6 in -
    Blade Tip Range - Forward - 40° -
    Circle Center Shift Left - - 29.6 in
    Circle Center Shift Right - - 28.7 in
    Maximum Shoulder Reach Left - - 74.3 in
    Maximum Shoulder Reach Right - - 71.3 in
    Moldboard Side Shift Left - - 25.6 in
    Moldboard Side Shift Right - - 20.7 in
    Blade Tip Range Backward - - 5
    Blade Tip Range Forward - - 40

    Frame
    Circle - Outer Diameter - 71.7 in -
    Front Axle - Wheel Lean - Left/Right - 17.1° -
    Front Axle - Total Oscillation per Side - 32° -

    Service Refill Capacities
    Transmission and Differential - 23.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5.8 gal (US) 4.2 gal (US)
    Hydraulic System - 33 gal (US) 11.9 gal (US)
    Circle Drive - 1.8 gal (US) -
    Cooling System - 15.9 gal (US) 40 l
    Fuel Tank - 109.9 gal (US) 78 gal (US)
    Circle Drive with Slip Clutch - - 2 gal (US)
    Circle Drive without Slip Clutch - - 0.5 gal (US)
    Engine Crankcase - - 5.5 gal (US)
    Transmission - - 4.8 gal (US)

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). -
    Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

    Weight
    Weight (Tier 4 Final)** - - 40488 lb
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - - 42119 lb
    All-Wheel Drive Weight (AWD) (Stage V)* - - 40543 lb
    Weight (Stage V)* - - 38912 lb
    Add a Similar Product: