Compare Equipment Go Back

140 Motor Grader LVR
140 GC Motor Grader

Engine

Net Power - EEC 80/1269 250 HP - -
Net Power - ISO 9249/SAE J1349 250 HP - -
Standard Capability 109 °F 109 °F -
Engine RPM 2,000 2,200 -
Engine Model Cat C9.3 Cat 7.1 -
Bore 4.5 in 4.1 in -
Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V -
Displacement 567.5 in³ 427.8 in³ -
Stroke 5.9 in 5.3 in -
Number of Cylinders 6 6 -
Torque Rise - ISO 9294 44% 40% -
Engine Power (ISO 14396) - 196 HP -
Derating Altitude - 9842 ft -
High - Ambient Capability - 122 °F -
Maximum Torque - ISO 9249 - 616 lb/ft -
Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. -
Note (2) - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
Note (3) - Power as declared per ISO 14396 -
Engine Power AWD (ISO 14396) - 196 HP -

Weights

Operating Weight - Typically Equipped 20236 lb 38912 lb -
Note - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. -

Moldboard

Blade Width 12 ft 12 ft -
Cutting Edge 6 in - -
Arc Radius 16.3 in 16.3 in -
Throat Clearance 6.5 in 4.4 in -
End Bit 6 in 6 in -
Blade Height - 24 in -
Cutting Edge Width - 6 in -

Dimensions

Basic Blade Width 140 in - -
Length of Machine* 397.6 in 406.7 in -
Width 97.6 in 95.6 in -
Note *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
Maximum Height 132 in 132.4 in -
Width All Wheel Drive (AWD) - 99.3 in -

Service Refill

Hydraulic System 14.5 gal (US) - -
Engine Crankcase 7.9 gal (US) - -
Circle Drive 1.8 gal (US) - -
Fuel Tank 100 gal (US) - -
Front Wheel Spindle Bearing - Each 0.13 gal (US) - -

Machine Weight

Note *Typically equipped with push block and ripper. - -
All-Wheel Drive (AWD) Weight 44613 lb - -
Weight* 42325 lb - -

Blade Range

Maximum Lift Above Ground 18.9 in 18.7 in -
Maximum Depth of Cut 28.9 in 28.1 in -
Circle Center Shift Left - 29.6 in -
Circle Center Shift Right - 28.7 in -
Maximum Shoulder Reach Left - 74.3 in -
Maximum Shoulder Reach Right - 71.3 in -
Moldboard Side Shift Left - 25.6 in -
Moldboard Side Shift Right - 20.7 in -
Blade Tip Range Backward - 5 -
Blade Tip Range Forward - 40 -

Air Conditioning System

Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. -

Service Refill Capacities

Fuel Tank - 78 gal (US) -
Circle Drive with Slip Clutch - 2 gal (US) -
Circle Drive without Slip Clutch - 0.5 gal (US) -
Cooling System - 40 l -
Engine Crankcase - 5.5 gal (US) -
Diesel Exhaust Fluid Tank (Tier 4 Only) - 4.2 gal (US) -
Hydraulic System - 11.9 gal (US) -
Transmission - 4.8 gal (US) -

Weight

Weight (Tier 4 Final)** - 40488 lb -
All-wheel Drive Weight (AWD) (Tier 4 Final)** - 42119 lb -
All-Wheel Drive Weight (AWD) (Stage V)* - 40543 lb -
Weight (Stage V)* - 38912 lb -
Add a Similar Product: