CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    140/140 AWD Motor Grader
    View Product Remove
    14 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - -
    Net Power - ISO 9249/SAE J1349 250 HP - -
    Standard Capability 109 °F 109 °F 122 °F
    Engine RPM 2,000 - -
    Engine Model Cat C9.3 Cat® C9.3 Cat C13
    Bore 4.5 in 4.5 in 5.1 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
    Displacement 567.5 in³ 567.5 in³ 763 in³
    Stroke 5.9 in 5.9 in 6.2 in
    Number of Cylinders 6 6 6
    Torque Rise - ISO 9294 44% - -
    Net Power Range (Tier 4) - 179 HP -
    Speed at Rated Power - 2,000 rpm 1,850 rpm
    Maximum Torque - VHP Plus - 840 lb/ft 1137 lb/ft
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 200 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - 189 HP -
    VHP Plus - Gear - Net Power - Forward 5th - 215 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - 200 HP -
    VHP Plus - Gear - Net Power - Forward 8th - 231 HP -
    Torque Rise - 38% 41%
    VHP Plus - Gear - Net Power - Reverse 2nd - 189 HP -
    VHP Plus - Gear - Net Power - Forward 1st - 179 HP -
    VHP Plus - Gear - Net Power - Forward 6th - 220 HP -
    VHP Plus - Gear - Net Power - Reverse 1st - 179 HP -
    VHP Plus Range - Net - 133-172 kW (179-231 hp) -
    VHP Plus - Gear - Net Power - Forward 7th - 225 HP -
    VHP Plus Range - Net - Metric - 133-172 kW (181-234 hp) -
    VHP Plus - Gear - Net Power - Forward 4th - 210 HP -
    Base Power (1st Gear) - Net - Metric - 181 HP -
    High Ambient - Fan Speed - Standard - 1,400 rpm -
    Derating Altitude - 10000 ft -
    High Ambient - Fan Speed - Maximum - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - 500 rpm -
    High - Ambient Capability - 122 °F -
    Base Power (1st Gear) - Net - - 238 HP
    Note (3) - - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (2) - - Optimized VHP Plus is standard for the 14M3.
    Maximum Altitude - Full Power - - 13900 ft
    Maximum Altitude - Full Power (Tier 3) - - 14349 ft
    Maximum Altitude - Full Power (Tier 2) - - 12049 ft
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Standard - Fan Speed - Minimum - - 550 rpm
    Note (4) - - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
    Note (5) - - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Standard - Fan Speed - Maximum - - 1,600 rpm

    Weights
    Operating Weight - Typically Equipped 20236 lb 42647 lb 57250 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle - 12055 lb -
    Operating Weight - Typically Equipped - Rear Axle - 30592 lb -
    Gross Vehicle Weight - Base - Front Axle - 9343 lb -
    Gross Vehicle Weight - Base - Rear Axle - 28077 lb -
    Gross Vehicle Weight - Maximum - Total - 55144 lb -
    Gross Vehicle Weight - Base - Total - 37420 lb -
    Operating Weight - Typically Equipped - Total - 42647 lb -
    Gross Vehicle Weight - Base* - Total - - 50980 lb
    Gross Vehicle Weight - Base* - Front Axle - - 13994 lb
    Gross Vehicle Weight - Typically Equipped - Total - - 57250 lb
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 42005 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 15245 lb
    Gross Vehicle Weight - Base* - Rear Axle - - 36994 lb
    Note - - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

    Moldboard
    Blade Width 12 ft 12 ft 14 ft
    Cutting Edge 6 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 4.6 in
    End Bit 6 in - -
    Moldboard - Height - 24 in -
    Moldboard - Thickness - 0.87 in -
    Cutting Edge Width - 6 in -
    Cutting Edge Thickness - 0.6 in -
    End Bit - Width - 6 in -
    End Bit - Thickness - 0.6 in -
    Blade Pull - Base GVW - 25269 lb -
    Blade Pull - Maximum GVW - 34262 lb -
    Blade Down Pressure - Base GVW - 16038 lb -
    Blade Down Pressure - Maximum GVW - 29309 lb -
    Moldboard - Blade Width - 12 ft -
    Blade Width - With End Bits - - 169 in
    Blade Height - With Cutting Edge - - 24.9 in
    Blade Width - Without End Bits - - 164 in
    Blade Height - Without Cutting Edge - - 23 in

    Dimensions
    Basic Blade Width 140 in - -
    Length of Machine* 397.6 in - -
    Width 97.6 in - -
    Note *Typically equipped with push block and ripper. - -
    Maximum Height 132 in - -
    Height - Top of Cab - 130 in -
    Length - Counterweight to Ripper - 399 in -
    Width - Outside Front Tires - 98.9 in -
    Length - Front Axle to Mid Tandem - 241 in -
    Length - Front Tire to Rear of Machine - 351 in -
    Length - Front Axle to Moldboard - 100 in -
    Length - Between Tandem Axles - 60 in -
    Width - Outside Rear Tires - 98.9 in -
    Width - Tire Center Lines - 84.3 in -
    Height - Front Axle Center - 23.5 in -
    Height - Exhaust Stack - 128 in -
    Height - Top of Cylinders - 120 in -
    Ground Clearance - Rear Axle - 13.3 in -

    Service Refill
    Hydraulic System 14.5 gal (US) - -
    Engine Crankcase 7.9 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Fuel Tank 100 gal (US) - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - -
    Fuel Capacity - 104 gal (US) -
    Cooling System - 15 gal (US) -
    Hydraulic System - Total - 26.4 gal (US) -
    Hydraulic System - Tank - 16.9 gal (US) -
    Diesel Exhaust Fluid - 5.8 gal (US) -
    Transmission - Differential - Final Drives - 18.5 gal (US) -
    Engine Oil - 7.9 gal (US) -
    Tandem Housing - Each - 20 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) -
    Circle Drive Housing - 1.8 gal (US) -

    Machine Weight
    Note *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight 44613 lb - -
    Weight* 42325 lb - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 18.9 in 16.5 in
    Maximum Depth of Cut 28.9 in 28.1 in 23.3 in
    Circle Centershift - Right - 28.7 in 20.5 in
    Circle Centershift - Left - 27.4 in 25.6 in
    Moldboard Sideshift - Right - 26 in 31.1 in
    Moldboard Sideshift - Left - 20.1 in 29.1 in
    Maximum Blade Position Angle - 90° -
    Blade Tip Range - Forward - 40° 40°
    Blade Tip Range - Backward - 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right - 77.9 in 78.9 in
    Maximum Shoulder Reach Outside of Tires - Left - 70.5 in 73.6 in

    Operating Specifications
    Top Speed - Forward - 29 mile/h -
    Top Speed - Reverse - 23 mile/h -
    Turning Radius - Outside Front Tires - 25.59 ft -
    Steering Range - Left/Right - 50° -
    Articulation Angle - Left/Right - 20° -
    Forward - 1st - 2.5 mile/h -
    Forward - 2nd - 3.4 mile/h -
    Forward - 3rd - 5 mile/h -
    Forward - 4th - 6.9 mile/h -
    Forward - 5th - 10.6 mile/h -
    Forward - 6th - 14.5 mile/h -
    Forward - 7th - 19.9 mile/h -
    Forward - 8th - 29 mile/h -
    Reverse - 1st - 2 mile/h -
    Reverse - 2nd - 3.7 mile/h -
    Reverse - 3rd - 5.4 mile/h -
    Reverse - 4th - 8.4 mile/h -
    Reverse - 5th - 15.7 mile/h -
    Reverse - 6th - 23 mile/h -

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse -
    Transmission - APECS, Direct Drive, Powershift -
    Brakes - Service - Multiple Oil Disc -
    Brakes - Service - Surface Area - 3565 in² -
    Brakes - Parking - Multiple Oil Disc -
    Brakes - Secondary - Dual Circuit -

    Hydraulic System
    Circuit Type - Parallel -
    Pump Type - Variable Piston -
    Pump Output - 55.7 gal/min -
    Maximum System Pressure - 3500 psi -
    Reservoir Tank Capacity - 16.9 gal (US) -
    Standby Pressure - 885 psi -

    Frame
    Drawbar - Width - 3 in -
    Circle - Diameter - 60.2 in -
    Circle - Blade Beam Thickness - 1.6 in -
    Drawbar - Height - 6 in -
    Front Frame Structure - Height - 12.6 in -
    Circle - Height - 5.4 in -
    Front Frame Structure - Width - 12 in -
    Drawbar - Thickness - 0.5 in -
    Front-Top/Bottom Plate - Width - 12 in -
    Front-Top/Bottom Plate - Thickness - 0.87 in -
    Front Axle - Height to Center - 23.5 in -
    Front Axle - Wheel Lean - Left/Right - 18° 17.1°
    Front Axle - Total Oscillation per Side - 32° 32°
    Circle - Outer Diameter - - 71.7 in

    Ripper
    Ripping Depth - Maximum - 16.8 in -
    Ripper Shank Holder Spacing - 21 in -
    Ripper Shank Holders - 5 -
    Penetration Force - 20812 lb -
    Pry-Out Force - 27794 lb -
    Machine Length Increase, Beam Raised - 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in -
    Mid, V-Type - Scarifier Shank Holders - 11 -
    Rear - Scarifying Depth, Maximum - 16.8 in -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in -
    Front, V-Type - Working Width - 47.4 in -
    Mid, V-Type - Working Width - 46.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May -
    Rear - Working Width - 84 in -
    Rear - Scarifier Shank Holders - 9 -
    Rear - Scarifier Shank Holder Spacing - 10.5 in -

    Standards
    Brakes - ISO 3450 -
    Sound - ISO 6394; ISO 6395 -
    Steering - ISO 5010 -
    ROPS/FOPS - ISO 3471/ISO 3449 -

    Tandems
    Height - 19.9 in -
    Width - 7.9 in -
    Sidewall Thickness - Inner - 0.63 in -
    Sidewall Thickness - Outer - 0.71 in -
    Drive Chain Pitch - 2 in -
    Wheel Axle Spacing - 60 in -
    Tandem Oscillation - Front Up - 15° -
    Tandem Oscillation - Front Down - 25° -

    Service Refill Capacities
    Transmission and Differential - - 23.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 5.8 gal (US)
    Hydraulic System - - 33 gal (US)
    Circle Drive - - 1.8 gal (US)
    Cooling System - - 15.9 gal (US)
    Fuel Tank - - 109.9 gal (US)

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
    Add a Similar Product: