Compare Equipment Go Back
140 Motor Grader LVR |
140/140 AWD Motor Grader |
|
|
Engine |
|||
---|---|---|---|
Net Power - EEC 80/1269 | 250 HP | - | - |
Net Power - ISO 9249/SAE J1349 | 250 HP | - | - |
Standard Capability | 109 °F | 109 °F | - |
Engine RPM | 2,000 | - | - |
Engine Model | Cat C9.3 | Cat® C9.3 | - |
Bore | 4.5 in | 4.5 in | - |
Emissions | U.S. EPA Tier 4 Final/EU Stage V | U.S. EPA Tier 4 Final/EU Stage V | - |
Displacement | 567.5 in³ | 567.5 in³ | - |
Stroke | 5.9 in | 5.9 in | - |
Number of Cylinders | 6 | 6 | - |
Torque Rise - ISO 9294 | 44% | - | - |
Net Power Range (Tier 4) | - | 179 HP | - |
Speed at Rated Power | - | 2,000 rpm | - |
Maximum Torque - VHP Plus | - | 840 lb/ft | - |
VHP Plus - Gear - Net Power - Reverse 3rd-6th | - | 200 HP | - |
VHP Plus - Gear - Net Power - Forward 2nd | - | 189 HP | - |
VHP Plus - Gear - Net Power - Forward 5th | - | 215 HP | - |
VHP Plus - Gear - Net Power - Forward 3rd | - | 200 HP | - |
VHP Plus - Gear - Net Power - Forward 8th | - | 231 HP | - |
Torque Rise | - | 38% | - |
VHP Plus - Gear - Net Power - Reverse 2nd | - | 189 HP | - |
VHP Plus - Gear - Net Power - Forward 1st | - | 179 HP | - |
VHP Plus - Gear - Net Power - Forward 6th | - | 220 HP | - |
VHP Plus - Gear - Net Power - Reverse 1st | - | 179 HP | - |
VHP Plus Range - Net | - | 133-172 kW (179-231 hp) | - |
VHP Plus - Gear - Net Power - Forward 7th | - | 225 HP | - |
VHP Plus Range - Net - Metric | - | 133-172 kW (181-234 hp) | - |
VHP Plus - Gear - Net Power - Forward 4th | - | 210 HP | - |
Base Power (1st Gear) - Net - Metric | - | 181 HP | - |
High Ambient - Fan Speed - Standard | - | 1,400 rpm | - |
Derating Altitude | - | 10000 ft | - |
High Ambient - Fan Speed - Maximum | - | 1,550 rpm | - |
High Ambient - Fan Speed - Minimum | - | 500 rpm | - |
High - Ambient Capability | - | 122 °F | - |
Weights |
|||
Operating Weight - Typically Equipped | 20236 lb | 42647 lb | - |
Gross Vehicle Weight - Maximum - Front Axle | - | 17075 lb | - |
Gross Vehicle Weight - Maximum - Rear Axle | - | 38069 lb | - |
Operating Weight - Typically Equipped - Front Axle | - | 12055 lb | - |
Operating Weight - Typically Equipped - Rear Axle | - | 30592 lb | - |
Gross Vehicle Weight - Base - Front Axle | - | 9343 lb | - |
Gross Vehicle Weight - Base - Rear Axle | - | 28077 lb | - |
Gross Vehicle Weight - Maximum - Total | - | 55144 lb | - |
Gross Vehicle Weight - Base - Total | - | 37420 lb | - |
Operating Weight - Typically Equipped - Total | - | 42647 lb | - |
Moldboard |
|||
Blade Width | 12 ft | 12 ft | - |
Cutting Edge | 6 in | - | - |
Arc Radius | 16.3 in | 16.3 in | - |
Throat Clearance | 6.5 in | 6.5 in | - |
End Bit | 6 in | - | - |
Moldboard - Height | - | 24 in | - |
Moldboard - Thickness | - | 0.87 in | - |
Cutting Edge Width | - | 6 in | - |
Cutting Edge Thickness | - | 0.6 in | - |
End Bit - Width | - | 6 in | - |
End Bit - Thickness | - | 0.6 in | - |
Blade Pull - Base GVW | - | 25269 lb | - |
Blade Pull - Maximum GVW | - | 34262 lb | - |
Blade Down Pressure - Base GVW | - | 16038 lb | - |
Blade Down Pressure - Maximum GVW | - | 29309 lb | - |
Moldboard - Blade Width | - | 12 ft | - |
Dimensions |
|||
Basic Blade Width | 140 in | - | - |
Length of Machine* | 397.6 in | - | - |
Width | 97.6 in | - | - |
Note | *Typically equipped with push block and ripper. | - | - |
Maximum Height | 132 in | - | - |
Height - Top of Cab | - | 130 in | - |
Length - Counterweight to Ripper | - | 399 in | - |
Width - Outside Front Tires | - | 98.9 in | - |
Length - Front Axle to Mid Tandem | - | 241 in | - |
Length - Front Tire to Rear of Machine | - | 351 in | - |
Length - Front Axle to Moldboard | - | 100 in | - |
Length - Between Tandem Axles | - | 60 in | - |
Width - Outside Rear Tires | - | 98.9 in | - |
Width - Tire Center Lines | - | 84.3 in | - |
Height - Front Axle Center | - | 23.5 in | - |
Height - Exhaust Stack | - | 128 in | - |
Height - Top of Cylinders | - | 120 in | - |
Ground Clearance - Rear Axle | - | 13.3 in | - |
Service Refill |
|||
Hydraulic System | 14.5 gal (US) | - | - |
Engine Crankcase | 7.9 gal (US) | - | - |
Circle Drive | 1.8 gal (US) | - | - |
Fuel Tank | 100 gal (US) | - | - |
Front Wheel Spindle Bearing - Each | 0.13 gal (US) | - | - |
Fuel Capacity | - | 104 gal (US) | - |
Cooling System | - | 15 gal (US) | - |
Hydraulic System - Total | - | 26.4 gal (US) | - |
Hydraulic System - Tank | - | 16.9 gal (US) | - |
Diesel Exhaust Fluid | - | 5.8 gal (US) | - |
Transmission - Differential - Final Drives | - | 18.5 gal (US) | - |
Engine Oil | - | 7.9 gal (US) | - |
Tandem Housing - Each | - | 20 gal (US) | - |
Front Wheel Spindle Bearing Housing | - | 0.13 gal (US) | - |
Circle Drive Housing | - | 1.8 gal (US) | - |
Machine Weight |
|||
Note | *Typically equipped with push block and ripper. | - | - |
All-Wheel Drive (AWD) Weight | 44613 lb | - | - |
Weight* | 42325 lb | - | - |
Blade Range |
|||
Maximum Lift Above Ground | 18.9 in | 18.9 in | - |
Maximum Depth of Cut | 28.9 in | 28.1 in | - |
Circle Centershift - Right | - | 28.7 in | - |
Circle Centershift - Left | - | 27.4 in | - |
Moldboard Sideshift - Right | - | 26 in | - |
Moldboard Sideshift - Left | - | 20.1 in | - |
Maximum Blade Position Angle | - | 90° | - |
Blade Tip Range - Forward | - | 40° | - |
Blade Tip Range - Backward | - | 5° | - |
Maximum Shoulder Reach Outside of Tires - Right | - | 77.9 in | - |
Maximum Shoulder Reach Outside of Tires - Left | - | 70.5 in | - |
Operating Specifications |
|||
Top Speed - Forward | - | 29 mile/h | - |
Top Speed - Reverse | - | 23 mile/h | - |
Turning Radius - Outside Front Tires | - | 25.59 ft | - |
Steering Range - Left/Right | - | 50° | - |
Articulation Angle - Left/Right | - | 20° | - |
Forward - 1st | - | 2.5 mile/h | - |
Forward - 2nd | - | 3.4 mile/h | - |
Forward - 3rd | - | 5 mile/h | - |
Forward - 4th | - | 6.9 mile/h | - |
Forward - 5th | - | 10.6 mile/h | - |
Forward - 6th | - | 14.5 mile/h | - |
Forward - 7th | - | 19.9 mile/h | - |
Forward - 8th | - | 29 mile/h | - |
Reverse - 1st | - | 2 mile/h | - |
Reverse - 2nd | - | 3.7 mile/h | - |
Reverse - 3rd | - | 5.4 mile/h | - |
Reverse - 4th | - | 8.4 mile/h | - |
Reverse - 5th | - | 15.7 mile/h | - |
Reverse - 6th | - | 23 mile/h | - |
Power Train |
|||
Forward/Reverse Gears | - | 8 Forward/6 Reverse | - |
Transmission | - | APECS, Direct Drive, Powershift | - |
Brakes - Service | - | Multiple Oil Disc | - |
Brakes - Service - Surface Area | - | 3565 in² | - |
Brakes - Parking | - | Multiple Oil Disc | - |
Brakes - Secondary | - | Dual Circuit | - |
Hydraulic System |
|||
Circuit Type | - | Parallel | - |
Pump Type | - | Variable Piston | - |
Pump Output | - | 55.7 gal/min | - |
Maximum System Pressure | - | 3500 psi | - |
Reservoir Tank Capacity | - | 16.9 gal (US) | - |
Standby Pressure | - | 885 psi | - |
Frame |
|||
Drawbar - Width | - | 3 in | - |
Circle - Diameter | - | 60.2 in | - |
Circle - Blade Beam Thickness | - | 1.6 in | - |
Drawbar - Height | - | 6 in | - |
Front Frame Structure - Height | - | 12.6 in | - |
Circle - Height | - | 5.4 in | - |
Front Frame Structure - Width | - | 12 in | - |
Drawbar - Thickness | - | 0.5 in | - |
Front-Top/Bottom Plate - Width | - | 12 in | - |
Front-Top/Bottom Plate - Thickness | - | 0.87 in | - |
Front Axle - Height to Center | - | 23.5 in | - |
Front Axle - Wheel Lean - Left/Right | - | 18° | - |
Front Axle - Total Oscillation per Side | - | 32° | - |
Ripper |
|||
Ripping Depth - Maximum | - | 16.8 in | - |
Ripper Shank Holder Spacing | - | 21 in | - |
Ripper Shank Holders | - | 5 | - |
Penetration Force | - | 20812 lb | - |
Pry-Out Force | - | 27794 lb | - |
Machine Length Increase, Beam Raised | - | 40.6 in | - |
Scarifier |
|||
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | - | 4.6 in | - |
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | - | 18.4 in | - |
Mid, V-Type - Scarifier Shank Holders | - | 11 | - |
Rear - Scarifying Depth, Maximum | - | 16.8 in | - |
Front, V-Type, 5 or 11 Tooth - Working Width | - | 40.6 in | - |
Front, V-Type - Working Width | - | 47.4 in | - |
Mid, V-Type - Working Width | - | 46.6 in | - |
Mid, V-Type - Scarifying Depth, Maximum | - | 11.5 in | - |
Mid, V-Type - Scarifier Shank Holder Spacing | - | 4.6 in | - |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | - | 11-May | - |
Rear - Working Width | - | 84 in | - |
Rear - Scarifier Shank Holders | - | 9 | - |
Rear - Scarifier Shank Holder Spacing | - | 10.5 in | - |
Standards |
|||
Brakes | - | ISO 3450 | - |
Sound | - | ISO 6394; ISO 6395 | - |
Steering | - | ISO 5010 | - |
ROPS/FOPS | - | ISO 3471/ISO 3449 | - |
Tandems |
|||
Height | - | 19.9 in | - |
Width | - | 7.9 in | - |
Sidewall Thickness - Inner | - | 0.63 in | - |
Sidewall Thickness - Outer | - | 0.71 in | - |
Drive Chain Pitch | - | 2 in | - |
Wheel Axle Spacing | - | 60 in | - |
Tandem Oscillation - Front Up | - | 15° | - |
Tandem Oscillation - Front Down | - | 25° | - |