CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    7295 Electric Rope Shovel
    View Product
    7395 Electric Rope Shovel
    View Product Remove
    7495 Electric Rope Shovel
    View Product Remove

    Dimensions
    Dipper Payload 50 t 70 t 120 t
    Dipper Capacity 19.1-38.2 m3 (25-50 yd3) 20.6-55.8 m3 (27-73 yd3) 30.6-62.7 m3 (40-82 yd3)
    Note Dependent on application and material density. Dependent on application and material density. Dependent on application and material density
    Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) - - 120 t

    Weights
    Working Weight - With Dipper and Standard Links 1748837 lb 2652000 lb 3056000 lb
    Ballast - Furnished By Customer 352000 lb 574000 lb 667150 lb
    Note (1) These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection
    Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

    Main Structures
    Ground Bearing Pressure Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors. -
    Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 28.22 in - -
    Ground Bearing Pressure - 182.9 cm (72 in) Treads 39 in - -
    Upper Works Overall Width - Including Standard Walkways 41.33 in 44.25 ft 41.9 ft
    Planetary Propel Dual-motor independent drive. Dual-motor independent drive. Dual-motor independent drive
    Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
    Ground Bearing Pressure - Total Effective Bearing Area 315.6 ft² - -
    Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
    Ground Bearing Pressure - 274.3 cm (108 in) Treads - 43 psi -
    Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard - 32.75 ft -
    Ground Bearing Pressure - Total Effective Bearing Area (2) - 442 ft² -
    Ground Bearing Pressure - Total Effective Bearing Area (1) - 343 ft² -
    Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads - 34.75 ft -
    Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard - 54 psi -
    Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm) Treads - - 36 m2 (380 kPa); 386 ft2 (55 psi)
    Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard - - 36 ft
    Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads - - 38 ft
    Ground Bearing Pressure - Note - - Ground bearing pressure is dependent upon many factors
    Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm) Treads - - 47 m2 (297 kPa); 501 ft2 (43 psi)

    Optimal Working Ranges*
    Dumping Height - With Clearance to Open Dipper Door 27.56 ft 30.84 ft -
    Cutting Radius - Maximum 67.59 ft 74.75 ft -
    Revolving Frame Tail Swing Radius 25.59 in 30.51 ft -
    Radius of Level Floor 48.88 ft 52.49 ft -
    Cutting Height - Maximum 45 ft 48.75 ft -
    Note (1) Optimal working ranges based on loading a Cat® 785D truck. Optimal working ranges based on loading a Cat® 793F truck. -
    Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. *All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads. -

    Lube System
    Type Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease
    Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
    Components (2) External fast fill from lower level. External fast fill from lower level. External FastFil from lower level

    Electrical
    Power Requirements - 60 Hz 4,160V, 7,200V 7,200V 7,200V, 13,800V
    Power Requirements - Peak power 2886 HP 4165 HP 3737 kW
    Drive IGBT Acutrol drive system. IGBT Acutrol drive system. IGBT Acutrol drive system
    Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V
    Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V
    Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp) 777-1087 kW (1,042-1,458 hp) 934-1308 kW
    Note Other voltages available to suit customer requirements. Other voltages available to suit customer requirements. -
    System Voltage - Nominal - - 50/60 Hz, 7,200V
    Power Requirements - Note - - Other voltage options available to suit customer requirements

    Front End
    Standard Rope Data - Retract - Diameter 2.25 in - -
    Standard Rope Data - Dipper Trip - Diameter 0.625 in - -
    Standard Rope Data - Boom Suspension - No. 4 - -
    Standard Rope Data - Crowd - No. 1 - -
    Standard Rope Data - Boom Suspension - Diameter 2.75 in - -
    Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. -
    Standard Rope Data - Retract - No. 1 - -
    Standard Rope Data - Hoist - Diameter 2.375 in - -
    Standard Rope Data - Crowd - Diameter 2.25 in - -
    Standard Rope Data - Dipper Trip - No. 1 - -
    Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. -
    Standard Rope Data - Hoist - No. 2 - -
    Note High impact ropes available as an option High impact ropes available as an option -
    Rope Data - Crowd - Diameter - 2.5 in 2.5 in
    Rope Data - Dipper Trip - Diameter - 0.625 in 0.75 in
    Rope Data - Hoist - Diameter - 2.75 in 2.75 in
    Rope Data - Boom Suspension - Diameter - 3.25 in 3.25 in
    Rope Data - Crowd - No. - 1 1
    Rope Data - Retract - No. - 1 1
    Rope Data - Dipper Trip - No. - 1 1
    Rope Data - Boom Suspension - No. - 4 4
    Rope Data - Hoist - No. - 2 2
    Rope Data - Retract - Diameter - 2.5 in 2.5 in
    Rope Data - Note - - High impact ropes available as an option
    Type - - One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
    Crowd (1) - - Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
    Crowd (2) - - (Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

    Dimensions - Working Ranges
    Dipper Capacities - - 30.6-62.7 m3 (40-82 yd3)
    Dipper Payload - - 120 ton (US)
    Maximum Dumping Height - - 28.9 ft
    Operating Weight - - 3056000 lb

    Dimensions (Approximate) - Optimal Working Ranges*
    Radius of Level Floor - - 56.1 ft
    Revolving Frame Tail Swing Radius - - 30.5 ft
    Cutting Height - Maximum - - 53.5 ft
    Cutting Radius - Maximum - - 80 ft
    Dumping Height - With Clearance to Open Dipper Door - - 28.9 ft
    Note (1) - - Optimal working ranges based on loading a Cat 797F truck.
    Note (2) - - *All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
    Add a Similar Product:
    • 7495 HD Electric Rope Shovel Add
    • 7495 HF Electric Rope Shovel Add
    • 7495 HF Electric Rope Shovel Add
    • 7495 Electric Rope Shovel Add