These weights will vary slightly depending upon dipper and optional equipment selection.
These weights will vary slightly depending upon dipper and optional equipment selection.
-
Note (2)
All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
-
Main Structures
Ground Bearing Pressure
Ground bearing pressure is dependent upon many factors.
Ground bearing pressure is dependent upon many factors.
-
Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard
28.22 in
-
-
Ground Bearing Pressure - 182.9 cm (72 in) Treads
39 in
-
-
Upper Works Overall Width - Including Standard Walkways
41.33 in
44.25 ft
-
Planetary Propel
Dual-motor independent drive.
Dual-motor independent drive.
-
Swing
Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-
Ground Bearing Pressure - Total Effective Bearing Area
315.6 ft²
-
-
Hoist
A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-
Ground Bearing Pressure - 274.3 cm (108 in) Treads
-
43 psi
-
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard
-
32.75 ft
-
Ground Bearing Pressure - Total Effective Bearing Area (2)
-
442 ft²
-
Ground Bearing Pressure - Total Effective Bearing Area (1)
-
343 ft²
-
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads
-
34.75 ft
-
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard
-
54 psi
-
Optimal Working Ranges*
Dumping Height - With Clearance to Open Dipper Door
27.56 ft
30.84 ft
-
Cutting Radius - Maximum
67.59 ft
74.75 ft
-
Revolving Frame Tail Swing Radius
25.59 in
30.51 ft
-
Radius of Level Floor
48.88 ft
52.49 ft
-
Cutting Height - Maximum
45 ft
48.75 ft
-
Note (1)
Optimal working ranges based on loading a Cat® 785D truck.
Optimal working ranges based on loading a Cat® 793F truck.
-
Note (2)
*All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
-
Lube System
Type
Automatic, single-line system for open gear lubricant and grease.
Automatic, single-line system for open gear lubricant and grease.
-
Components (1)
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
-
Components (2)
External fast fill from lower level.
External fast fill from lower level.
-
Electrical
Power Requirements - 60 Hz
4,160V, 7,200V
7,200V
-
Power Requirements - Peak power
2886 HP
4165 HP
-
Drive
IGBT Acutrol drive system.
IGBT Acutrol drive system.
-
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
-
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V
6,000V, 6,600V, 7,200V, 11,000V
-
Power Requirements - Average Power Demand
538-753 kW (721-1,010 hp)
777-1087 kW (1,042-1,458 hp)
-
Note
Other voltages available to suit customer requirements.
Other voltages available to suit customer requirements.
-
Front End
Standard Rope Data - Retract - Diameter
2.25 in
-
-
Standard Rope Data - Dipper Trip - Diameter
0.625 in
-
-
Standard Rope Data - Boom Suspension - No.
4
-
-
Standard Rope Data - Crowd - No.
1
-
-
Standard Rope Data - Boom Suspension - Diameter
2.75 in
-
-
Components
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-
Standard Rope Data - Retract - No.
1
-
-
Standard Rope Data - Hoist - Diameter
2.375 in
-
-
Standard Rope Data - Crowd - Diameter
2.25 in
-
-
Standard Rope Data - Dipper Trip - No.
1
-
-
Crowd
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.